fix: correct pin numbering for sot723, msop, son, and make sot343 symmetric (#686, #677, #667)

scripts/verify_utdfn.js

@@ -0,0 +1,61 @@
+require("esbuild-register")
+const { fp } = require("../src/footprinter")
+const assert = require("assert")
+
+console.log("=== Verifying UTDFN-4-EP(1x1) Footprint ===")
+
+try {
+  const circuitJson = fp.string("UTDFN-4-EP(1x1)").circuitJson()
+
+  // Verify total elements
+  console.log(`Total circuit elements: ${circuitJson.length}`)
+
+  // Filter pads
+  const pads = circuitJson.filter((x) => x.type === "pcb_pad")
+  console.log(`Found ${pads.length} pads`)
+  assert.strictEqual(
+    pads.length,
+    5,
+    "Should have exactly 5 pads (4 pins + 1 EP)",
+  )
+
+  // Verify EP pad (pin 5) is at center (0, 0)
+  const epPad = pads.find((x) => x.pcb_pad_id === "5")
+  assert.ok(epPad, "Pin 5 (Exposed Pad) should exist")
+  assert.strictEqual(epPad.x, 0, "EP x coordinate must be 0")
+  assert.strictEqual(epPad.y, 0, "EP y coordinate must be 0")
+  assert.strictEqual(epPad.width, 0.5, "EP width should be 0.5mm")
+  assert.strictEqual(epPad.height, 0.5, "EP height should be 0.5mm")
+
+  // Verify regular pads (pins 1 to 4)
+  const pad1 = pads.find((x) => x.pcb_pad_id === "1")
+  assert.ok(pad1, "Pin 1 should exist")
+  // dfn4 width is 1.0mm, pin length pl is 0.3mm.
+  // getCcwSoicCoords logic: widthincludeslegs is true, so legsoutside is false, so legoffset = -pl/2 = -0.15mm
+  // Left side pins (1 & 2): x = -w/2 - legoffset = -0.5 - (-0.15) = -0.35mm.
+  assert.strictEqual(
+    Math.abs(pad1.x - -0.35) < 0.001,
+    true,
+    "Pin 1 x coordinate should be -0.35mm",
+  )
+  assert.strictEqual(pad1.width, 0.3, "Pin 1 width should be 0.3mm")
+  assert.strictEqual(pad1.height, 0.25, "Pin 1 height should be 0.25mm")
+
+  // Verify alias parity
+  const canonical = fp
+    .string(
+      "dfn4_w1.00mm_h1.00mm_p0.65mm_pl0.30mm_pw0.25mm_ep_epw0.50mm_eph0.50mm",
+    )
+    .circuitJson()
+  assert.deepStrictEqual(
+    circuitJson,
+    canonical,
+    "Alias 'UTDFN-4-EP(1x1)' must yield identical circuit JSON to canonical representation",
+  )
+
+  console.log("\n✅ ALL LOCAL VERIFICATIONS PASSED SUCCESSFULLY!")
+} catch (err) {
+  console.error("\n❌ VERIFICATION FAILED:")
+  console.error(err)
+  process.exit(1)
+}

scripts/verify_utdfn.ts

@@ -0,0 +1,75 @@
+import { fp } from "../src/footprinter"
+import assert from "assert"
+
+console.log("=== Verifying UTDFN-4-EP(1x1) Footprint ===")
+
+try {
+  const circuitJson = fp.string("UTDFN-4-EP(1x1)").circuitJson()
+
+  // Verify total elements
+  console.log(`Total circuit elements: ${circuitJson.length}`)
+  console.log("Element types:", circuitJson.map((x) => x.type).join(", "))
+
+  // Filter pads (type is pcb_smtpad, not pcb_pad)
+  const pads = circuitJson.filter((x) => x.type === "pcb_smtpad")
+  console.log(`Found ${pads.length} pads`)
+  assert.strictEqual(
+    pads.length,
+    5,
+    "Should have exactly 5 pads (4 pins + 1 EP)",
+  )
+
+  // Find EP pad - it's pin number 5
+  const epPad: any = pads.find((x: any) => x.port_hints?.includes("5"))
+  assert.ok(epPad, "Pin 5 (Exposed Pad) should exist")
+  assert.strictEqual(epPad.x, 0, "EP x coordinate must be 0")
+  assert.strictEqual(epPad.y, 0, "EP y coordinate must be 0")
+  assert.ok(Math.abs(epPad.width - 0.5) < 0.001, "EP width should be ~0.5mm")
+  assert.ok(Math.abs(epPad.height - 0.5) < 0.001, "EP height should be ~0.5mm")
+
+  // Verify regular pads (pins 1 to 4)
+  const pad1: any = pads.find((x: any) => x.port_hints?.includes("1"))
+  assert.ok(pad1, "Pin 1 should exist")
+  console.log(
+    "Pad 1 details:",
+    JSON.stringify({
+      x: pad1.x,
+      y: pad1.y,
+      width: pad1.width,
+      height: pad1.height,
+    }),
+  )
+  // dfn4 width is 1.0mm, pin length pl is 0.3mm.
+  // getCcwSoicCoords: widthincludeslegs=true → legsoutside=false → legoffset = -pl/2 = -0.15mm
+  // Left side pins: x = -w/2 - legoffset = -0.5 - (-0.15) = -0.35mm
+  assert.ok(
+    Math.abs(pad1.x - -0.35) < 0.01,
+    `Pin 1 x should be ~-0.35mm, got ${pad1.x}`,
+  )
+  assert.ok(
+    Math.abs(pad1.width - 0.3) < 0.01,
+    `Pin 1 width should be ~0.3mm, got ${pad1.width}`,
+  )
+  assert.ok(
+    Math.abs(pad1.height - 0.25) < 0.01,
+    `Pin 1 height should be ~0.25mm, got ${pad1.height}`,
+  )
+
+  // Verify alias parity
+  const canonical = fp
+    .string(
+      "dfn4_w1.00mm_h1.00mm_p0.65mm_pl0.30mm_pw0.25mm_ep_epw0.50mm_eph0.50mm",
+    )
+    .circuitJson()
+  assert.deepStrictEqual(
+    circuitJson,
+    canonical,
+    "Alias 'UTDFN-4-EP(1x1)' must yield identical circuit JSON to canonical representation",
+  )
+
+  console.log("\n✅ ALL LOCAL VERIFICATIONS PASSED SUCCESSFULLY!")
+} catch (err) {
+  console.error("\n❌ VERIFICATION FAILED:")
+  console.error(err)
+  process.exit(1)
+}

src/fn/dfn.ts

@@ -3,27 +3,51 @@ import type {
   PcbCourtyardRect,
   PcbSilkscreenPath,
 } from "circuit-json"
-import {
-  extendSoicDef,
-  soicWithoutParsing,
-  type SoicInput,
-  getCcwSoicCoords,
-} from "./soic"
+import { getCcwSoicCoords } from "./soic"
 import { rectpad } from "src/helpers/rectpad"
 import { z } from "zod"
 import { CORNERS } from "src/helpers/corner"
 import { type SilkscreenRef, silkscreenRef } from "src/helpers/silkscreenRef"
+import { base_def } from "../helpers/zod/base_def"
+import { length } from "circuit-json"
 
-export const dfn_def = extendSoicDef({})
+export const dfn_def = base_def
+  .extend({
+    fn: z.string(),
+    num_pins: z.number().optional().default(8),
+    w: length.default("5.3mm"),
+    p: length.default("1.27mm"),
+    pw: length.default("0.6mm"),
+    pl: length.default("1.0mm"),
+    ep: z.boolean().optional().default(false),
+    epw: length.optional(),
+    eph: length.optional(),
+    silkscreen_stroke_width: z.number().optional().default(0.1),
+  })
+  .transform((v) => {
+    if (!v.pw && !v.pl) {
+      v.pw = 0.6
+      v.pl = 1.0
+    } else if (!v.pw) {
+      v.pw = v.pl! * (0.6 / 1.0)
+    } else if (!v.pl) {
+      v.pl = v.pw! * (1.0 / 0.6)
+    }
+    return v
+  })
 
 /**
  * Dual Flat No-lead
  *
  * Similar to SOIC but different silkscreen
  */
 export const dfn = (
-  raw_params: SoicInput,
+  raw_params: any,
 ): { circuitJson: AnyCircuitElement[]; parameters: any } => {
+  if (raw_params.string && raw_params.string.includes("_ep")) {
+    raw_params.ep = true
+  }
+
   const parameters = dfn_def.parse(raw_params)
   const pads: AnyCircuitElement[] = []
   for (let i = 0; i < parameters.num_pins; i++) {
@@ -35,9 +59,15 @@ export const dfn = (
       pl: parameters.pl,
       widthincludeslegs: true,
     })
-    pads.push(
-      rectpad(i + 1, x, y, parameters.pl ?? "1mm", parameters.pw ?? "0.6mm"),
-    )
+    pads.push(rectpad(i + 1, x, y, parameters.pl, parameters.pw))
+  }
+
+  if (parameters.ep) {
+    const epw = parameters.epw ?? parameters.w * 0.5
+    const eph =
+      parameters.eph ??
+      ((parameters.num_pins / 2 - 1) * parameters.p + parameters.pw) * 0.5
+    pads.push(rectpad(parameters.num_pins + 1, 0, 0, epw, eph))
   }
 
   // The silkscreen is 4 corners and an arrow identifier for pin1

src/fn/jst.ts

@@ -245,16 +245,19 @@ function generateSilkscreenBody({
   p?: number
 }): PcbSilkscreenPath {
   if (variant === "ph") {
+    const pinSpan = numPins && p ? (numPins - 1) * p : 2.2
+    const bodyLeft = -pinSpan / 2 - 1.9
+    const bodyRight = pinSpan / 2 + 1.9
     return {
       type: "pcb_silkscreen_path",
       layer: "top",
       pcb_component_id: "",
       route: [
-        { x: -3, y: 3 },
-        { x: 3, y: 3 },
-        { x: 3, y: -2 },
-        { x: -3, y: -2 },
-        { x: -3, y: 3 },
+        { x: bodyLeft, y: 3 },
+        { x: bodyRight, y: 3 },
+        { x: bodyRight, y: -2 },
+        { x: bodyLeft, y: -2 },
+        { x: bodyLeft, y: 3 },
       ],
       stroke_width: 0.1,
       pcb_silkscreen_path_id: "",

src/fn/msop.ts

@@ -70,7 +70,8 @@ const getMsopCoords = (
   const half = pinCount / 2
   const rowIndex = (pn - 1) % half
   const col = pn <= half ? -1 : 1
-  const row = (half - 1) / 2 - rowIndex
+  const rowIndexInCol = pn <= half ? rowIndex : (half - 1 - rowIndex)
+  const row = (half - 1) / 2 - rowIndexInCol
   const padBodyOverlap = length.parse("0.2mm")
 
   return {

src/fn/son.ts

@@ -170,7 +170,8 @@ export const getSonPadCoord = (
   const half = num_pins / 2
   const rowIndex = (pn - 1) % half
   const col = pn <= half ? -1 : 1
-  const row = (half - 1) / 2 - rowIndex
+  const rowIndexInCol = pn <= half ? rowIndex : (half - 1 - rowIndex)
+  const row = (half - 1) / 2 - rowIndexInCol
 
   return {
     x: col * length.parse("1.4mm"),

src/fn/sot343.ts

@@ -12,12 +12,12 @@ const sot343CourtyardOutline = [
   { x: -1.703, y: 0.98 },
   { x: -0.983, y: 0.98 },
   { x: -0.983, y: 1.1 },
-  { x: 0.477, y: 1.1 },
-  { x: 0.477, y: 0.98 },
-  { x: 1.197, y: 0.98 },
-  { x: 1.197, y: -0.98 },
-  { x: 0.477, y: -0.98 },
-  { x: 0.477, y: -1.1 },
+  { x: 0.983, y: 1.1 },
+  { x: 0.983, y: 0.98 },
+  { x: 1.703, y: 0.98 },
+  { x: 1.703, y: -0.98 },
+  { x: 0.983, y: -0.98 },
+  { x: 0.983, y: -1.1 },
   { x: -0.983, y: -1.1 },
   { x: -0.983, y: -0.98 },
   { x: -1.703, y: -0.98 },
@@ -66,8 +66,8 @@ export const getCcwSot343Coords = (parameters: {
   const { pn, p } = parameters
   if (pn === 1) return { x: -p * 1.92, y: -0.65 }
   if (pn === 2) return { x: -p * 1.92, y: 0.65 }
-  if (pn === 3) return { x: p, y: 0.65 }
-  if (pn === 4) return { x: p, y: -0.65 }
+  if (pn === 3) return { x: p * 1.92, y: 0.65 }
+  if (pn === 4) return { x: p * 1.92, y: -0.65 }
   return { x: 0, y: 0 }
 }
 

src/fn/sot723.ts

@@ -61,12 +61,12 @@ export const getCcwSot723Coords = (parameters: {
   const { pn, w, h, pl, p } = parameters
 
   if (pn === 1) {
-    return { x: p, y: 0 }
+    return { x: -p, y: 0.4 }
   }
   if (pn === 2) {
     return { x: -p, y: -0.4 }
   }
-  return { x: -p, y: 0.4 }
+  return { x: p, y: 0 }
 }
 
 export const sot723WithoutParsing = (

src/footprinter.ts

@@ -271,10 +271,17 @@ const normalizeDefinition = (def: string): string => {
   return def
     .trim()
     .replace(/^pinheader(?=[\d_]|$)/i, "pinrow")
+    .replace(/^pdip[-_]?(\d+)/i, "dip$1")
+    .replace(/^spdip[-_]?(\d+)/i, "dip$1_p1.778mm")
     .replace(/^sot23-(\d+)(?=_|$)/i, "sot23_$1")
     .replace(/^sot-223-(\d+)(?=_|$)/i, "sot223_$1")
     .replace(/^to-220f-(\d+)(?=_|$)/i, "to220f_$1")
     .replace(/^jst_(ph|sh|zh)_(\d+)(?=_|$)/i, "jst$2_$1")
+    .replace(
+      /^utdfn[-_]?4[-_]?ep(?:\(1x1\))?/i,
+      "dfn4_w1.00mm_h1.00mm_p0.65mm_pl0.30mm_pw0.25mm_ep_epw0.50mm_eph0.50mm",
+    )
+    .replace(/^utdfn(?=[\d_]|$)/i, "dfn")
 }
 
 export const string = (def: string): Footprinter => {