OCPBUGS-87385: Updating ose-olm-catalogd-container image to be consistent with ART for 5.0

[openshift-bot]

Updating ose-olm-catalogd-container image to be consistent with ART for 5.0
TLDR:
Product builds by ART can be configured for different base and builder images than corresponding CI
builds. This automated PR requests a change to CI configuration to align with ART's configuration;
please take steps to merge it quickly or contact ART to coordinate changes.

The configuration in the following ART component metadata is driving this alignment request:
ose-olm-catalogd.yml.

Detail:

This repository is out of sync with the downstream product builds for this component. The CI
configuration for at least one image differs from ART's expected product configuration. This should
be addressed to ensure that the component's CI testing accurate reflects what customers will
experience.

Most of these PRs are opened as an ART-driven proposal to migrate base image or builder(s) to a
different version, usually prior to GA. The intent is to effect changes in both configurations
simultaneously without breaking either CI or ART builds, so usually ART builds are configured to
consider CI as canonical and attempt to match CI config until the PR merges to align both. ART may
also configure changes in GA releases with CI remaining canonical for a brief grace period to enable
CI to succeed and the alignment PR to merge. In either case, ART configuration will be made
canonical at some point (typically at branch-cut before GA or release dev-cut after GA), so it is
important to align CI configuration as soon as possible.

PRs are also triggered when CI configuration changes without ART coordination, for instance to
change the number of builder images or to use a different golang version. These changes should be
coordinated with ART; whether ART configuration is canonical or not, preferably it would be updated
first to enable the changes to occur simultaneously in both CI and ART at the same time. This also
gives ART a chance to validate the intended changes first. For instance, ART compiles most
components with the Golang version being used by the control plane for a given OpenShift release.
Exceptions to this convention (i.e. you believe your component must be compiled with a Golang
version independent from the control plane) must be granted by the OpenShift staff engineers and
communicated to the ART team.

Roles & Responsibilities:

• Component owners are responsible for ensuring these alignment PRs merge with passing
  tests OR that necessary metadata changes are reported to the ART team
  in #forum-ocp-art on Slack. If necessary, the changes required by this pull request can be
  introduced with a separate PR opened by the component team. Once the repository is aligned,
  this PR will be closed automatically.
• In particular, it could be that a job like verify-deps is complaining. In that case, please open
  a new PR with the dependency issues addressed (and base images bumped). ART-9595 for reference.
• Patch-manager or those with sufficient privileges within this repository may add
  any required labels to ensure the PR merges once tests are passing. In cases where ART config is
  canonical, downstream builds are already being built with these changes, and merging this PR
  only improves the fidelity of our CI. In cases where ART config is not canonical, this provides
  a grace period for the component team to align their CI with ART's configuration before it becomes
  canonical in product builds.

ART has been configured to reconcile your CI build root image (see https://docs.ci.openshift.org/docs/architecture/ci-operator/#build-root-image).
In order for your upstream .ci-operator.yaml configuration to be honored, you must set the following in your openshift/release ci-operator configuration file:

build_root:
  from_repository: true

Change behavior of future PRs:

• In case you just want to follow the base images that ART suggests, you can configure additional labels to be
  set up automatically. This means that such a PR would merge without human intervention (and awareness!) in the future.
  To do so, open a PR to set the auto_label attribute in the image configuration. Example
• You can set a commit prefix, like UPSTREAM: <carry>: . An example.

If you have any questions about this pull request, please reach out in the #forum-ocp-art Slack channel.

[openshift-bot]

Created by ART pipeline job run https://art-jenkins.apps.prod-stable-spoke1-dc-iad2.itup.redhat.com/job/aos-cd-builds/job/build%252Fsync-ci-images/201

[coderabbitai]

Walkthrough

CI operator configuration and Docker build images are updated to use OpenShift 5.0 base images. The .ci-operator.yaml build root image tag changes from 4.23 to 5.0, and the multi-stage Dockerfile builder and runtime base images upgrade from OpenShift 4.x to 5.0 variants.

Changes

OpenShift 5.0 Image References

Layer / File(s)	Summary
Base image references .ci-operator.yaml, openshift/catalogd.Dockerfile	CI build root image tag updates from OpenShift 4.23 to 5.0. Dockerfile builder stage image changes to ocp/builder:rhel-9-golang-1.26-openshift-5.0 and runtime stage image changes to ocp/5.0:base-rhel9 from the previous 4.x versions.

Estimated code review effort

🎯 1 (Trivial) | ⏱️ ~3 minutes

Possibly related PRs

• openshift/operator-framework-operator-controller#746: Both PRs modify the same CI/Docker references in .ci-operator.yaml and openshift/catalogd.Dockerfile, upgrading OpenShift/Golang builder images to newer versions.

Suggested labels

lgtm, approved

Suggested reviewers

• trgeiger
• rashmigottipati

---

Important

Pre-merge checks failed

Please resolve all errors before merging. Addressing warnings is optional.

❌ Failed checks (1 error)

Check name	Status	Explanation	Resolution
Ote Binary Stdout Contract	❌ Error	Binaries use klog without stderr redirection, causing stdout writes that violate OTE Stdout Contract.	Add klog.LogToStderr(true) in init() of cmd/catalogd/main.go and cmd/operator-controller/main.go before klog initialization.

✅ Passed checks (14 passed)

Check name	Status	Explanation
Docstring Coverage	✅ Passed	No functions found in the changed files to evaluate docstring coverage. Skipping docstring coverage check.
Linked Issues check	✅ Passed	Check skipped because no linked issues were found for this pull request.
Out of Scope Changes check	✅ Passed	Check skipped because no linked issues were found for this pull request.
Stable And Deterministic Test Names	✅ Passed	PR only modifies Dockerfile and CI config files. Repository uses Go's standard testing package, not Ginkgo. No Ginkgo tests exist in the codebase.
Test Structure And Quality	✅ Passed	This PR only updates OpenShift image versions in .ci-operator.yaml and openshift/catalogd.Dockerfile. It contains no Ginkgo test code modifications, making this check inapplicable.
Microshift Test Compatibility	✅ Passed	PR only updates CI config and Dockerfile for OpenShift 5.0 compatibility. No new Ginkgo e2e tests added; existing e2e tests use Cucumber/Godog, not Ginkgo.
Single Node Openshift (Sno) Test Compatibility	✅ Passed	PR only modifies CI configuration and Dockerfile to update OpenShift 5.0 image references. No new Ginkgo e2e tests are added; check not applicable.
Topology-Aware Scheduling Compatibility	✅ Passed	PR only updates CI build image tags and container base images (4.23→5.0, 4.22→5.0); no deployment manifests, pod specs, or scheduling constraints are modified.
Ipv6 And Disconnected Network Test Compatibility	✅ Passed	PR modifies only CI config (.ci-operator.yaml) and Dockerfile (openshift/catalogd.Dockerfile) for base image updates. No new Ginkgo e2e tests are added; check not applicable.
No-Weak-Crypto	✅ Passed	PR only updates Docker image references and CI configuration tags from OpenShift 4.23 to 5.0. No cryptographic code, weak algorithms, or custom crypto implementations are introduced.
Container-Privileges	✅ Passed	PR modifies only CI config and Dockerfile for OpenShift 5.0 updates. No K8s manifests or privileged container settings found in changes.
No-Sensitive-Data-In-Logs	✅ Passed	No logging statements exposing passwords, tokens, API keys, PII, session IDs, hostnames, or customer data found in the PR changes (.ci-operator.yaml and openshift/catalogd.Dockerfile).
Title check	✅ Passed	The title clearly and specifically describes the main change: updating the ose-olm-catalogd-container image to align with ART configuration for OpenShift 5.0.
Description Check	✅ Passed	Check skipped - CodeRabbit’s high-level summary is enabled.

✨ Finishing Touches

🧪 Generate unit tests (beta)

• Create PR with unit tests

---

_{Comment @coderabbitai help to get the list of available commands and usage tips.}

[openshift-ci-robot]

@openshift-bot: This pull request references Jira Issue OCPBUGS-87385, which is valid. The bug has been moved to the POST state.

3 validation(s) were run on this bug

• bug is open, matching expected state (open)
• bug target version (5.0.0) matches configured target version for branch (5.0.0)
• bug is in the state New, which is one of the valid states (NEW, ASSIGNED, POST)

The bug has been updated to refer to the pull request using the external bug tracker.

Details

In response to this:

Updating ose-olm-catalogd-container image to be consistent with ART for 5.0
TLDR:
Product builds by ART can be configured for different base and builder images than corresponding CI
builds. This automated PR requests a change to CI configuration to align with ART's configuration;
please take steps to merge it quickly or contact ART to coordinate changes.

The configuration in the following ART component metadata is driving this alignment request:
ose-olm-catalogd.yml.

Detail:

This repository is out of sync with the downstream product builds for this component. The CI
configuration for at least one image differs from ART's expected product configuration. This should
be addressed to ensure that the component's CI testing accurate reflects what customers will
experience.

Most of these PRs are opened as an ART-driven proposal to migrate base image or builder(s) to a
different version, usually prior to GA. The intent is to effect changes in both configurations
simultaneously without breaking either CI or ART builds, so usually ART builds are configured to
consider CI as canonical and attempt to match CI config until the PR merges to align both. ART may
also configure changes in GA releases with CI remaining canonical for a brief grace period to enable
CI to succeed and the alignment PR to merge. In either case, ART configuration will be made
canonical at some point (typically at branch-cut before GA or release dev-cut after GA), so it is
important to align CI configuration as soon as possible.

PRs are also triggered when CI configuration changes without ART coordination, for instance to
change the number of builder images or to use a different golang version. These changes should be
coordinated with ART; whether ART configuration is canonical or not, preferably it would be updated
first to enable the changes to occur simultaneously in both CI and ART at the same time. This also
gives ART a chance to validate the intended changes first. For instance, ART compiles most
components with the Golang version being used by the control plane for a given OpenShift release.
Exceptions to this convention (i.e. you believe your component must be compiled with a Golang
version independent from the control plane) must be granted by the OpenShift staff engineers and
communicated to the ART team.

Roles & Responsibilities:

• Component owners are responsible for ensuring these alignment PRs merge with passing
  tests OR that necessary metadata changes are reported to the ART team
  in #forum-ocp-art on Slack. If necessary, the changes required by this pull request can be
  introduced with a separate PR opened by the component team. Once the repository is aligned,
  this PR will be closed automatically.
• In particular, it could be that a job like verify-deps is complaining. In that case, please open
  a new PR with the dependency issues addressed (and base images bumped). ART-9595 for reference.
• Patch-manager or those with sufficient privileges within this repository may add
  any required labels to ensure the PR merges once tests are passing. In cases where ART config is
  canonical, downstream builds are already being built with these changes, and merging this PR
  only improves the fidelity of our CI. In cases where ART config is not canonical, this provides
  a grace period for the component team to align their CI with ART's configuration before it becomes
  canonical in product builds.

ART has been configured to reconcile your CI build root image (see https://docs.ci.openshift.org/docs/architecture/ci-operator/#build-root-image).
In order for your upstream .ci-operator.yaml configuration to be honored, you must set the following in your openshift/release ci-operator configuration file:

build_root:
 from_repository: true

Change behavior of future PRs:

• In case you just want to follow the base images that ART suggests, you can configure additional labels to be
  set up automatically. This means that such a PR would merge without human intervention (and awareness!) in the future.
  To do so, open a PR to set the auto_label attribute in the image configuration. Example
• You can set a commit prefix, like UPSTREAM: <carry>: . An example.

If you have any questions about this pull request, please reach out in the #forum-ocp-art Slack channel.

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the openshift-eng/jira-lifecycle-plugin repository.

[openshift-ci]

[APPROVALNOTIFIER] This PR is NOT APPROVED

This pull-request has been approved by: openshift-bot
Once this PR has been reviewed and has the lgtm label, please assign joelanford for approval. For more information see the Code Review Process.

The full list of commands accepted by this bot can be found here.

Details

Needs approval from an approver in each of these files:

• DOWNSTREAM_OWNERS

Approvers can indicate their approval by writing /approve in a comment
Approvers can cancel approval by writing /approve cancel in a comment

[openshift-ci-robot]

@openshift-bot: This pull request references Jira Issue OCPBUGS-87385, which is valid.

3 validation(s) were run on this bug

• bug is open, matching expected state (open)
• bug target version (5.0.0) matches configured target version for branch (5.0.0)
• bug is in the state POST, which is one of the valid states (NEW, ASSIGNED, POST)

Details

In response to this:

Updating ose-olm-catalogd-container image to be consistent with ART for 5.0
TLDR:
Product builds by ART can be configured for different base and builder images than corresponding CI
builds. This automated PR requests a change to CI configuration to align with ART's configuration;
please take steps to merge it quickly or contact ART to coordinate changes.

The configuration in the following ART component metadata is driving this alignment request:
ose-olm-catalogd.yml.

Detail:

This repository is out of sync with the downstream product builds for this component. The CI
configuration for at least one image differs from ART's expected product configuration. This should
be addressed to ensure that the component's CI testing accurate reflects what customers will
experience.

Most of these PRs are opened as an ART-driven proposal to migrate base image or builder(s) to a
different version, usually prior to GA. The intent is to effect changes in both configurations
simultaneously without breaking either CI or ART builds, so usually ART builds are configured to
consider CI as canonical and attempt to match CI config until the PR merges to align both. ART may
also configure changes in GA releases with CI remaining canonical for a brief grace period to enable
CI to succeed and the alignment PR to merge. In either case, ART configuration will be made
canonical at some point (typically at branch-cut before GA or release dev-cut after GA), so it is
important to align CI configuration as soon as possible.

PRs are also triggered when CI configuration changes without ART coordination, for instance to
change the number of builder images or to use a different golang version. These changes should be
coordinated with ART; whether ART configuration is canonical or not, preferably it would be updated
first to enable the changes to occur simultaneously in both CI and ART at the same time. This also
gives ART a chance to validate the intended changes first. For instance, ART compiles most
components with the Golang version being used by the control plane for a given OpenShift release.
Exceptions to this convention (i.e. you believe your component must be compiled with a Golang
version independent from the control plane) must be granted by the OpenShift staff engineers and
communicated to the ART team.

Roles & Responsibilities:

• Component owners are responsible for ensuring these alignment PRs merge with passing
  tests OR that necessary metadata changes are reported to the ART team
  in #forum-ocp-art on Slack. If necessary, the changes required by this pull request can be
  introduced with a separate PR opened by the component team. Once the repository is aligned,
  this PR will be closed automatically.
• In particular, it could be that a job like verify-deps is complaining. In that case, please open
  a new PR with the dependency issues addressed (and base images bumped). ART-9595 for reference.
• Patch-manager or those with sufficient privileges within this repository may add
  any required labels to ensure the PR merges once tests are passing. In cases where ART config is
  canonical, downstream builds are already being built with these changes, and merging this PR
  only improves the fidelity of our CI. In cases where ART config is not canonical, this provides
  a grace period for the component team to align their CI with ART's configuration before it becomes
  canonical in product builds.

ART has been configured to reconcile your CI build root image (see https://docs.ci.openshift.org/docs/architecture/ci-operator/#build-root-image).
In order for your upstream .ci-operator.yaml configuration to be honored, you must set the following in your openshift/release ci-operator configuration file:

build_root:
 from_repository: true

Change behavior of future PRs:

• In case you just want to follow the base images that ART suggests, you can configure additional labels to be
  set up automatically. This means that such a PR would merge without human intervention (and awareness!) in the future.
  To do so, open a PR to set the auto_label attribute in the image configuration. Example
• You can set a commit prefix, like UPSTREAM: <carry>: . An example.

If you have any questions about this pull request, please reach out in the #forum-ocp-art Slack channel.

Summary by CodeRabbit

• Chores
• Updated build infrastructure to use OpenShift 5.0 components for CI/CD pipelines and container image builds.

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the openshift-eng/jira-lifecycle-plugin repository.

[openshift-ci]

@openshift-bot: The following tests failed, say /retest to rerun all failed tests or /retest-required to rerun all mandatory failed tests:

Test name	Commit	Details	Required	Rerun command
ci/prow/images	cbaa0ea	link	true	/test images
ci/prow/openshift-e2e-aws-techpreview	cbaa0ea	link	true	/test openshift-e2e-aws-techpreview

Full PR test history. Your PR dashboard.

Details

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the kubernetes-sigs/prow repository. I understand the commands that are listed here.