OCPBUGS-87493: Updating ose-baremetal-installer-container image to be consistent with ART for 5.0

[openshift-bot]

Updating ose-baremetal-installer-container image to be consistent with ART for 5.0
TLDR:
Product builds by ART can be configured for different base and builder images than corresponding CI
builds. This automated PR requests a change to CI configuration to align with ART's configuration;
please take steps to merge it quickly or contact ART to coordinate changes.

The configuration in the following ART component metadata is driving this alignment request:
ose-baremetal-installer.yml.

Detail:

This repository is out of sync with the downstream product builds for this component. The CI
configuration for at least one image differs from ART's expected product configuration. This should
be addressed to ensure that the component's CI testing accurate reflects what customers will
experience.

Most of these PRs are opened as an ART-driven proposal to migrate base image or builder(s) to a
different version, usually prior to GA. The intent is to effect changes in both configurations
simultaneously without breaking either CI or ART builds, so usually ART builds are configured to
consider CI as canonical and attempt to match CI config until the PR merges to align both. ART may
also configure changes in GA releases with CI remaining canonical for a brief grace period to enable
CI to succeed and the alignment PR to merge. In either case, ART configuration will be made
canonical at some point (typically at branch-cut before GA or release dev-cut after GA), so it is
important to align CI configuration as soon as possible.

PRs are also triggered when CI configuration changes without ART coordination, for instance to
change the number of builder images or to use a different golang version. These changes should be
coordinated with ART; whether ART configuration is canonical or not, preferably it would be updated
first to enable the changes to occur simultaneously in both CI and ART at the same time. This also
gives ART a chance to validate the intended changes first. For instance, ART compiles most
components with the Golang version being used by the control plane for a given OpenShift release.
Exceptions to this convention (i.e. you believe your component must be compiled with a Golang
version independent from the control plane) must be granted by the OpenShift staff engineers and
communicated to the ART team.

Roles & Responsibilities:

• Component owners are responsible for ensuring these alignment PRs merge with passing
  tests OR that necessary metadata changes are reported to the ART team
  in #forum-ocp-art on Slack. If necessary, the changes required by this pull request can be
  introduced with a separate PR opened by the component team. Once the repository is aligned,
  this PR will be closed automatically.
• In particular, it could be that a job like verify-deps is complaining. In that case, please open
  a new PR with the dependency issues addressed (and base images bumped). ART-9595 for reference.
• Patch-manager or those with sufficient privileges within this repository may add
  any required labels to ensure the PR merges once tests are passing. In cases where ART config is
  canonical, downstream builds are already being built with these changes, and merging this PR
  only improves the fidelity of our CI. In cases where ART config is not canonical, this provides
  a grace period for the component team to align their CI with ART's configuration before it becomes
  canonical in product builds.

ART has been configured to reconcile your CI build root image (see https://docs.ci.openshift.org/docs/architecture/ci-operator/#build-root-image).
In order for your upstream .ci-operator.yaml configuration to be honored, you must set the following in your openshift/release ci-operator configuration file:

build_root:
  from_repository: true

Change behavior of future PRs:

• In case you just want to follow the base images that ART suggests, you can configure additional labels to be
  set up automatically. This means that such a PR would merge without human intervention (and awareness!) in the future.
  To do so, open a PR to set the auto_label attribute in the image configuration. Example
• You can set a commit prefix, like UPSTREAM: <carry>: . An example.

If you have any questions about this pull request, please reach out in the #forum-ocp-art Slack channel.

[openshift-bot]

Created by ART pipeline job run https://art-jenkins.apps.prod-stable-spoke1-dc-iad2.itup.redhat.com/job/aos-cd-builds/job/build%252Fsync-ci-images/216

[coderabbitai]

Note

.coderabbit.yaml has unrecognized properties

CodeRabbit is using all valid settings from your configuration. Unrecognized properties (listed below) have been ignored and may indicate typos or deprecated fields that can be removed.

⚠️ Parsing warnings (1)

Validation error: Unrecognized key: "tools"

⚙️ Configuration instructions

• Please see the configuration documentation for more information.
• You can also validate your configuration using the online YAML validator.
• If your editor has YAML language server enabled, you can add the path at the top of this file to enable auto-completion and validation: # yaml-language-server: $schema=https://coderabbit.ai/integrations/schema.v2.json

📝 Walkthrough

Walkthrough

This pull request upgrades OpenShift CI infrastructure from version 4.22 to 5.0, with Go updated from 1.25 to 1.26. Both the CI operator configuration and the baremetal installer Dockerfile are updated to reference the newer image tags.

Changes

OpenShift Version Upgrade

Layer / File(s)	Summary
CI build root image and baremetal builder stage versions .ci-operator.yaml, images/baremetal/Dockerfile.ci	CI operator build_root_image.tag and baremetal Dockerfile build stages (etcd, hyperkube, builder) and final runtime base image updated from OpenShift 4.22 with Go 1.25 to OpenShift 5.0 with Go 1.26.

---

🎯 2 (Simple) | ⏱️ ~10 minutes

🚥 Pre-merge checks | ✅ 15

✅ Passed checks (15 passed)

Check name	Status	Explanation
Docstring Coverage	✅ Passed	No functions found in the changed files to evaluate docstring coverage. Skipping docstring coverage check.
Linked Issues check	✅ Passed	Check skipped because no linked issues were found for this pull request.
Out of Scope Changes check	✅ Passed	Check skipped because no linked issues were found for this pull request.
Stable And Deterministic Test Names	✅ Passed	PR modifies CI config (.ci-operator.yaml) and Dockerfile, not test code. Repository uses standard Go testing.T, not Ginkgo. No Ginkgo test names in non-vendored code.
Test Structure And Quality	✅ Passed	PR contains no Ginkgo test code. Changes are limited to CI configuration and Dockerfile, not test code requiring quality assessment.
Microshift Test Compatibility	✅ Passed	No new Ginkgo e2e tests are added in this PR. Changes are limited to CI configuration (.ci-operator.yaml) and Dockerfile image tag updates for build stages.
Single Node Openshift (Sno) Test Compatibility	✅ Passed	PR modifies only CI configuration (.ci-operator.yaml, images/baremetal/Dockerfile.ci) with no new Ginkgo e2e tests. SNO compatibility check does not apply.
Topology-Aware Scheduling Compatibility	✅ Passed	PR only modifies CI build configuration (.ci-operator.yaml) and Dockerfile.ci base images; no deployment manifests, operator code, controllers, or scheduling constraints are added or modified.
Ote Binary Stdout Contract	✅ Passed	PR only modifies CI config files (.ci-operator.yaml, Dockerfile.ci), not application code. OTE Stdout Contract applies to binary code (main, init, etc.), not build infrastructure.
Ipv6 And Disconnected Network Test Compatibility	✅ Passed	PR contains no new Ginkgo e2e tests. Changes are limited to CI configuration (.ci-operator.yaml) and Dockerfile updates (images/baremetal/Dockerfile.ci). The custom check does not apply.
No-Weak-Crypto	✅ Passed	PR updates build config/Docker base images (OpenShift 4.22→5.0, Go 1.25→1.26). No weak cryptographic algorithms, custom crypto implementations, or insecure secret comparisons are introduced.
Container-Privileges	✅ Passed	PR modifies only CI config and Dockerfile. No K8s manifests with privileged settings, hostPID/Network/IPC, SYS_ADMIN, or allowPrivilegeEscalation present. Dockerfile runs as non-root (USER 1000:1000).
No-Sensitive-Data-In-Logs	✅ Passed	No logging statements expose sensitive data (passwords, tokens, API keys, PII, session IDs, or credentials) in the PR changes; modifications are image tag updates only.
Title check	✅ Passed	The title accurately describes the main change: updating container images from OpenShift 4.22 to 5.0 for ART consistency, matching the actual file modifications.
Description Check	✅ Passed	Check skipped - CodeRabbit’s high-level summary is enabled.

_{✏️ Tip: You can configure your own custom pre-merge checks in the settings.}

✨ Finishing Touches

🧪 Generate unit tests (beta)

• Create PR with unit tests

---

_{Comment @coderabbitai help to get the list of available commands and usage tips.}

[openshift-ci-robot]

@openshift-bot: This pull request references Jira Issue OCPBUGS-87493, which is valid. The bug has been moved to the POST state.

3 validation(s) were run on this bug

• bug is open, matching expected state (open)
• bug target version (5.0.0) matches configured target version for branch (5.0.0)
• bug is in the state New, which is one of the valid states (NEW, ASSIGNED, POST)

The bug has been updated to refer to the pull request using the external bug tracker.

Details

In response to this:

Updating ose-baremetal-installer-container image to be consistent with ART for 5.0
TLDR:
Product builds by ART can be configured for different base and builder images than corresponding CI
builds. This automated PR requests a change to CI configuration to align with ART's configuration;
please take steps to merge it quickly or contact ART to coordinate changes.

The configuration in the following ART component metadata is driving this alignment request:
ose-baremetal-installer.yml.

Detail:

This repository is out of sync with the downstream product builds for this component. The CI
configuration for at least one image differs from ART's expected product configuration. This should
be addressed to ensure that the component's CI testing accurate reflects what customers will
experience.

Most of these PRs are opened as an ART-driven proposal to migrate base image or builder(s) to a
different version, usually prior to GA. The intent is to effect changes in both configurations
simultaneously without breaking either CI or ART builds, so usually ART builds are configured to
consider CI as canonical and attempt to match CI config until the PR merges to align both. ART may
also configure changes in GA releases with CI remaining canonical for a brief grace period to enable
CI to succeed and the alignment PR to merge. In either case, ART configuration will be made
canonical at some point (typically at branch-cut before GA or release dev-cut after GA), so it is
important to align CI configuration as soon as possible.

PRs are also triggered when CI configuration changes without ART coordination, for instance to
change the number of builder images or to use a different golang version. These changes should be
coordinated with ART; whether ART configuration is canonical or not, preferably it would be updated
first to enable the changes to occur simultaneously in both CI and ART at the same time. This also
gives ART a chance to validate the intended changes first. For instance, ART compiles most
components with the Golang version being used by the control plane for a given OpenShift release.
Exceptions to this convention (i.e. you believe your component must be compiled with a Golang
version independent from the control plane) must be granted by the OpenShift staff engineers and
communicated to the ART team.

Roles & Responsibilities:

• Component owners are responsible for ensuring these alignment PRs merge with passing
  tests OR that necessary metadata changes are reported to the ART team
  in #forum-ocp-art on Slack. If necessary, the changes required by this pull request can be
  introduced with a separate PR opened by the component team. Once the repository is aligned,
  this PR will be closed automatically.
• In particular, it could be that a job like verify-deps is complaining. In that case, please open
  a new PR with the dependency issues addressed (and base images bumped). ART-9595 for reference.
• Patch-manager or those with sufficient privileges within this repository may add
  any required labels to ensure the PR merges once tests are passing. In cases where ART config is
  canonical, downstream builds are already being built with these changes, and merging this PR
  only improves the fidelity of our CI. In cases where ART config is not canonical, this provides
  a grace period for the component team to align their CI with ART's configuration before it becomes
  canonical in product builds.

ART has been configured to reconcile your CI build root image (see https://docs.ci.openshift.org/docs/architecture/ci-operator/#build-root-image).
In order for your upstream .ci-operator.yaml configuration to be honored, you must set the following in your openshift/release ci-operator configuration file:

build_root:
 from_repository: true

Change behavior of future PRs:

• In case you just want to follow the base images that ART suggests, you can configure additional labels to be
  set up automatically. This means that such a PR would merge without human intervention (and awareness!) in the future.
  To do so, open a PR to set the auto_label attribute in the image configuration. Example
• You can set a commit prefix, like UPSTREAM: <carry>: . An example.

If you have any questions about this pull request, please reach out in the #forum-ocp-art Slack channel.

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the openshift-eng/jira-lifecycle-plugin repository.

[openshift-ci-robot]

@openshift-bot: This pull request references Jira Issue OCPBUGS-87493, which is valid.

3 validation(s) were run on this bug

• bug is open, matching expected state (open)
• bug target version (5.0.0) matches configured target version for branch (5.0.0)
• bug is in the state POST, which is one of the valid states (NEW, ASSIGNED, POST)

Details

In response to this:

Updating ose-baremetal-installer-container image to be consistent with ART for 5.0
TLDR:
Product builds by ART can be configured for different base and builder images than corresponding CI
builds. This automated PR requests a change to CI configuration to align with ART's configuration;
please take steps to merge it quickly or contact ART to coordinate changes.

The configuration in the following ART component metadata is driving this alignment request:
ose-baremetal-installer.yml.

Detail:

This repository is out of sync with the downstream product builds for this component. The CI
configuration for at least one image differs from ART's expected product configuration. This should
be addressed to ensure that the component's CI testing accurate reflects what customers will
experience.

Most of these PRs are opened as an ART-driven proposal to migrate base image or builder(s) to a
different version, usually prior to GA. The intent is to effect changes in both configurations
simultaneously without breaking either CI or ART builds, so usually ART builds are configured to
consider CI as canonical and attempt to match CI config until the PR merges to align both. ART may
also configure changes in GA releases with CI remaining canonical for a brief grace period to enable
CI to succeed and the alignment PR to merge. In either case, ART configuration will be made
canonical at some point (typically at branch-cut before GA or release dev-cut after GA), so it is
important to align CI configuration as soon as possible.

PRs are also triggered when CI configuration changes without ART coordination, for instance to
change the number of builder images or to use a different golang version. These changes should be
coordinated with ART; whether ART configuration is canonical or not, preferably it would be updated
first to enable the changes to occur simultaneously in both CI and ART at the same time. This also
gives ART a chance to validate the intended changes first. For instance, ART compiles most
components with the Golang version being used by the control plane for a given OpenShift release.
Exceptions to this convention (i.e. you believe your component must be compiled with a Golang
version independent from the control plane) must be granted by the OpenShift staff engineers and
communicated to the ART team.

Roles & Responsibilities:

• Component owners are responsible for ensuring these alignment PRs merge with passing
  tests OR that necessary metadata changes are reported to the ART team
  in #forum-ocp-art on Slack. If necessary, the changes required by this pull request can be
  introduced with a separate PR opened by the component team. Once the repository is aligned,
  this PR will be closed automatically.
• In particular, it could be that a job like verify-deps is complaining. In that case, please open
  a new PR with the dependency issues addressed (and base images bumped). ART-9595 for reference.
• Patch-manager or those with sufficient privileges within this repository may add
  any required labels to ensure the PR merges once tests are passing. In cases where ART config is
  canonical, downstream builds are already being built with these changes, and merging this PR
  only improves the fidelity of our CI. In cases where ART config is not canonical, this provides
  a grace period for the component team to align their CI with ART's configuration before it becomes
  canonical in product builds.

ART has been configured to reconcile your CI build root image (see https://docs.ci.openshift.org/docs/architecture/ci-operator/#build-root-image).
In order for your upstream .ci-operator.yaml configuration to be honored, you must set the following in your openshift/release ci-operator configuration file:

build_root:
 from_repository: true

Change behavior of future PRs:

• In case you just want to follow the base images that ART suggests, you can configure additional labels to be
  set up automatically. This means that such a PR would merge without human intervention (and awareness!) in the future.
  To do so, open a PR to set the auto_label attribute in the image configuration. Example
• You can set a commit prefix, like UPSTREAM: <carry>: . An example.

If you have any questions about this pull request, please reach out in the #forum-ocp-art Slack channel.

Summary by CodeRabbit

• Chores
• Updated build infrastructure to use OpenShift 5.0 and Go 1.26 (upgraded from 4.22 and 1.25 respectively) for improved performance and compatibility.

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the openshift-eng/jira-lifecycle-plugin repository.

[coderabbitai]

Actionable comments posted: 1

🤖 Prompt for all review comments with AI agents

Verify each finding against current code. Fix only still-valid issues, skip the
rest with a brief reason, keep changes minimal, and validate.

Inline comments:
In `@images/baremetal/Dockerfile.ci`:
- Around line 5-8: The Dockerfile uses unapproved CI registry images in the FROM
stages; update the base images for the stages named "etcd", "kas", and "builder"
(and the other stage referenced at line 20) to approved UBI minimal or
distroless images from catalog.redhat.com (or add a documented exception if a CI
image is required), by replacing the registry.ci.openshift.org image references
with the corresponding catalog.redhat.com UBI/distroless equivalents and
ensuring any required tag/variant (golang/runtime) matches the original
functionality.

🪄 Autofix (Beta)

Fix all unresolved CodeRabbit comments on this PR:

• Push a commit to this branch (recommended)
• Create a new PR with the fixes

---

ℹ️ Review info

⚙️ Run configuration

Configuration used: Repository YAML (base), Central YAML (inherited)

Review profile: CHILL

Plan: Enterprise

Run ID: bb7d0da3-26de-4aca-bc15-a2e98acab8f3

📥 Commits

Reviewing files that changed from the base of the PR and between b052dea and ce46cde.

📒 Files selected for processing (2)

• .ci-operator.yaml
• images/baremetal/Dockerfile.ci

[openshift-bot]

ART wants to connect issue OCPBUGS-87746 to this PR, but found it is currently hooked up to ['OCPBUGS-87493']. Please consult with #forum-ocp-art if it is not clear what there is to do.

[patrickdillon]

/lgtm
/approve

[openshift-ci]

[APPROVALNOTIFIER] This PR is APPROVED

This pull-request has been approved by: patrickdillon

The full list of commands accepted by this bot can be found here.

The pull request process is described here

Details

Needs approval from an approver in each of these files:

• OWNERS [patrickdillon]

Approvers can indicate their approval by writing /approve in a comment
Approvers can cancel approval by writing /approve cancel in a comment

[openshift-merge-bot]

/retest-required

Remaining retests: 0 against base HEAD 8e014ad and 2 for PR HEAD ce46cde in total

[openshift-ci]

@openshift-bot: The following tests failed, say /retest to rerun all failed tests or /retest-required to rerun all mandatory failed tests:

Test name	Commit	Details	Required	Rerun command
ci/prow/e2e-metal-single-node-live-iso	ce46cde	link	false	/test e2e-metal-single-node-live-iso
ci/prow/e2e-metal-ovn-two-node-fencing	ce46cde	link	false	/test e2e-metal-ovn-two-node-fencing

Full PR test history. Your PR dashboard.

Details

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the kubernetes-sigs/prow repository. I understand the commands that are listed here.

[openshift-merge-bot]

/retest-required

Remaining retests: 0 against base HEAD 20cdcf6 and 1 for PR HEAD ce46cde in total

[openshift-ci-robot]

@openshift-bot: Jira Issue Verification Checks: Jira Issue OCPBUGS-87493
✔️ This pull request was pre-merge verified.
✔️ All associated pull requests have merged.
✔️ All associated, merged pull requests were pre-merge verified.

Jira Issue OCPBUGS-87493 has been moved to the MODIFIED state and will move to the VERIFIED state when the change is available in an accepted nightly payload. 🕓

Details

In response to this:

Updating ose-baremetal-installer-container image to be consistent with ART for 5.0
TLDR:
Product builds by ART can be configured for different base and builder images than corresponding CI
builds. This automated PR requests a change to CI configuration to align with ART's configuration;
please take steps to merge it quickly or contact ART to coordinate changes.

The configuration in the following ART component metadata is driving this alignment request:
ose-baremetal-installer.yml.

Detail:

This repository is out of sync with the downstream product builds for this component. The CI
configuration for at least one image differs from ART's expected product configuration. This should
be addressed to ensure that the component's CI testing accurate reflects what customers will
experience.

Most of these PRs are opened as an ART-driven proposal to migrate base image or builder(s) to a
different version, usually prior to GA. The intent is to effect changes in both configurations
simultaneously without breaking either CI or ART builds, so usually ART builds are configured to
consider CI as canonical and attempt to match CI config until the PR merges to align both. ART may
also configure changes in GA releases with CI remaining canonical for a brief grace period to enable
CI to succeed and the alignment PR to merge. In either case, ART configuration will be made
canonical at some point (typically at branch-cut before GA or release dev-cut after GA), so it is
important to align CI configuration as soon as possible.

PRs are also triggered when CI configuration changes without ART coordination, for instance to
change the number of builder images or to use a different golang version. These changes should be
coordinated with ART; whether ART configuration is canonical or not, preferably it would be updated
first to enable the changes to occur simultaneously in both CI and ART at the same time. This also
gives ART a chance to validate the intended changes first. For instance, ART compiles most
components with the Golang version being used by the control plane for a given OpenShift release.
Exceptions to this convention (i.e. you believe your component must be compiled with a Golang
version independent from the control plane) must be granted by the OpenShift staff engineers and
communicated to the ART team.

Roles & Responsibilities:

• Component owners are responsible for ensuring these alignment PRs merge with passing
  tests OR that necessary metadata changes are reported to the ART team
  in #forum-ocp-art on Slack. If necessary, the changes required by this pull request can be
  introduced with a separate PR opened by the component team. Once the repository is aligned,
  this PR will be closed automatically.
• In particular, it could be that a job like verify-deps is complaining. In that case, please open
  a new PR with the dependency issues addressed (and base images bumped). ART-9595 for reference.
• Patch-manager or those with sufficient privileges within this repository may add
  any required labels to ensure the PR merges once tests are passing. In cases where ART config is
  canonical, downstream builds are already being built with these changes, and merging this PR
  only improves the fidelity of our CI. In cases where ART config is not canonical, this provides
  a grace period for the component team to align their CI with ART's configuration before it becomes
  canonical in product builds.

ART has been configured to reconcile your CI build root image (see https://docs.ci.openshift.org/docs/architecture/ci-operator/#build-root-image).
In order for your upstream .ci-operator.yaml configuration to be honored, you must set the following in your openshift/release ci-operator configuration file:

build_root:
 from_repository: true

Change behavior of future PRs:

• In case you just want to follow the base images that ART suggests, you can configure additional labels to be
  set up automatically. This means that such a PR would merge without human intervention (and awareness!) in the future.
  To do so, open a PR to set the auto_label attribute in the image configuration. Example
• You can set a commit prefix, like UPSTREAM: <carry>: . An example.

If you have any questions about this pull request, please reach out in the #forum-ocp-art Slack channel.

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the openshift-eng/jira-lifecycle-plugin repository.