Configure Mend for GitHub.com

.gitignore

@@ -75,7 +75,7 @@ modules.order
 #
 # Debian directory (make deb-pkg)
 #
-/debian/
+#/debian/
 
 #
 # Snap directory (make snap-pkg)

.whitesource

@@ -0,0 +1,45 @@
+{
+  "scanSettings": {
+    "configMode": "AUTO",
+    "configExternalURL": "",
+    "projectToken": "",
+    "baseBranches": []
+  },
+  "scanSettingsSAST": {
+    "enableScan": true,
+    "scanPullRequests": true,
+    "incrementalScan": true,
+    "baseBranches": [],
+    "snippetSize": 10
+  },
+  "checkRunSettings": {
+    "vulnerableCheckRunConclusionLevel": "failure",
+    "displayMode": "diff",
+    "useMendCheckNames": true
+  },
+  "checkRunSettingsSAST": {
+    "checkRunConclusionLevel": "failure",
+    "severityThreshold": "high"
+  },
+  "issueSettings": {
+    "minSeverityLevel": "LOW",
+    "issueType": "DEPENDENCY"
+  },
+  "issueSettingsSAST": {
+    "minSeverityLevel": "high",
+    "issueType": "repo"
+  },
+  "remediateSettings": {
+    "workflowRules": {
+      "enabled": true
+    }
+  },
+   "imageSettings":{
+       "imageTracing":{
+           "enableImageTracingPR": false,
+           "addRepositoryCoordinate": false,
+           "addDockerfilePath": false,
+           "addMendIdentifier": false
+       }
+   }
+}

Documentation/ABI/stable/sysfs-driver-dma-idxd

@@ -220,6 +220,24 @@ Contact:	[email protected]
 Description:	Show the current number of entries in this WQ if WQ Occupancy
 		Support bit WQ capabilities is 1.
 
+What:		/sys/bus/dsa/devices/wq<m>.<n>/op_config
+Date:		Sept 14, 2022
+KernelVersion:	6.0.0
+Contact:	[email protected]
+Description:	Shows the operation capability bits displayed in bitmap format
+		presented by %*pb printk() output format specifier.
+		The attribute can be configured when the WQ is disabled in
+		order to configure the WQ to accept specific bits that
+		correlates to the operations allowed. It's visible only
+		on platforms that support the capability.
+
+What:		/sys/bus/dsa/devices/wq<m>.<n>/enqcmds_retries
+Date		Oct 29, 2021
+KernelVersion:	5.17.0
+Contact:	[email protected]
+Description:	Indicate the number of retires for an enqcmds submission on a shared wq.
+		A max value to set attribute is capped at 64.
+
 What:           /sys/bus/dsa/devices/engine<m>.<n>/group_id
 Date:           Oct 25, 2019
 KernelVersion:  5.6.0

Documentation/ABI/testing/configfs-usb-gadget-uvc

@@ -51,7 +51,7 @@ Date:		Dec 2014
 KernelVersion:	4.0
 Description:	Default output terminal descriptors
 
-		All attributes read only:
+		All attributes read only except bSourceID:
 
 		==============	=============================================
 		iTerminal	index of string descriptor

Documentation/ABI/testing/debugfs-aufs

@@ -0,0 +1,55 @@
+What:		/debug/aufs/si_<id>/
+Date:		March 2009
+Contact:	J. R. Okajima <[email protected]>
+Description:
+		Under /debug/aufs, a directory named si_<id> is created
+		per aufs mount, where <id> is a unique id generated
+		internally.
+
+What:		/debug/aufs/si_<id>/plink
+Date:		Apr 2013
+Contact:	J. R. Okajima <[email protected]>
+Description:
+		It has three lines and shows the information about the
+		pseudo-link. The first line is a single number
+		representing a number of buckets. The second line is a
+		number of pseudo-links per buckets (separated by a
+		blank). The last line is a single number representing a
+		total number of psedo-links.
+		When the aufs mount option 'noplink' is specified, it
+		will show "1\n0\n0\n".
+
+What:		/debug/aufs/si_<id>/xib
+Date:		March 2009
+Contact:	J. R. Okajima <[email protected]>
+Description:
+		It shows the consumed blocks by xib (External Inode Number
+		Bitmap), its block size and file size.
+		When the aufs mount option 'noxino' is specified, it
+		will be empty. About XINO files, see the aufs manual.
+
+What:		/debug/aufs/si_<id>/xi<branch-index>
+Date:		March 2009
+Contact:	J. R. Okajima <[email protected]>
+Description:
+		It shows the consumed blocks by xino (External Inode Number
+		Translation Table), its link count, block size and file
+		size.
+		Due to the file size limit, there may exist multiple
+		xino files per branch.  In this case, "-N" is added to
+		the filename and it corresponds to the index of the
+		internal xino array.  "-0" is omitted.
+		When the aufs mount option 'noxino' is specified, Those
+		entries won't exist.  About XINO files, see the aufs
+		manual.
+
+What:		/debug/aufs/si_<id>/xigen
+Date:		March 2009
+Contact:	J. R. Okajima <[email protected]>
+Description:
+		It shows the consumed blocks by xigen (External Inode
+		Generation Table), its block size and file size.
+		If CONFIG_AUFS_EXPORT is disabled, this entry will not
+		be created.
+		When the aufs mount option 'noxino' is specified, it
+		will be empty. About XINO files, see the aufs manual.

Documentation/ABI/testing/sysfs-ata

@@ -107,13 +107,14 @@ Description:
 				described in ATA8 7.16 and 7.17. Only valid if
 				the device is not a PM.
 
-		pio_mode:	(RO) Transfer modes supported by the device when
-				in PIO mode. Mostly used by PATA device.
+		pio_mode:	(RO) PIO transfer mode used by the device.
+				Mostly used by PATA devices.
 
-		xfer_mode:	(RO) Current transfer mode
+		xfer_mode:	(RO) Current transfer mode. Mostly used by
+				PATA devices.
 
-		dma_mode:	(RO) Transfer modes supported by the device when
-				in DMA mode. Mostly used by PATA device.
+		dma_mode:	(RO) DMA transfer mode used by the device.
+				Mostly used by PATA devices.
 
 		class:		(RO) Device class. Can be "ata" for disk,
 				"atapi" for packet device, "pmp" for PM, or

Documentation/ABI/testing/sysfs-aufs

@@ -0,0 +1,31 @@
+What:		/sys/fs/aufs/si_<id>/
+Date:		March 2009
+Contact:	J. R. Okajima <[email protected]>
+Description:
+		Under /sys/fs/aufs, a directory named si_<id> is created
+		per aufs mount, where <id> is a unique id generated
+		internally.
+
+What:		/sys/fs/aufs/si_<id>/br<idx>
+Date:		March 2009
+Contact:	J. R. Okajima <[email protected]>
+Description:
+		It shows the abolute path of a member directory (which
+		is called branch) in aufs, and its permission.
+
+What:		/sys/fs/aufs/si_<id>/brid<idx>
+Date:		July 2013
+Contact:	J. R. Okajima <[email protected]>
+Description:
+		It shows the id of a member directory (which is called
+		branch) in aufs.
+
+What:		/sys/fs/aufs/si_<id>/xi_path
+Date:		March 2009
+Contact:	J. R. Okajima <[email protected]>
+Description:
+		It shows the abolute path of XINO (External Inode Number
+		Bitmap, Translation Table and Generation Table) file
+		even if it is the default path.
+		When the aufs mount option 'noxino' is specified, it
+		will be empty. About XINO files, see the aufs manual.

Documentation/ABI/testing/sysfs-bus-iio

@@ -188,7 +188,7 @@ Description:
 		Raw capacitance measurement from channel Y. Units after
 		application of scale and offset are nanofarads.
 
-What:		/sys/.../iio:deviceX/in_capacitanceY-in_capacitanceZ_raw
+What:		/sys/.../iio:deviceX/in_capacitanceY-capacitanceZ_raw
 KernelVersion:	3.2
 Contact:	[email protected]
 Description:

Documentation/ABI/testing/sysfs-bus-iio-vf610

@@ -1,4 +1,4 @@
-What:		/sys/bus/iio/devices/iio:deviceX/conversion_mode
+What:		/sys/bus/iio/devices/iio:deviceX/in_conversion_mode
 KernelVersion:	4.2
 Contact:	[email protected]
 Description:

Documentation/ABI/testing/sysfs-bus-optee-devices

@@ -6,3 +6,12 @@ Description:
 		OP-TEE bus provides reference to registered drivers under this directory. The <uuid>
 		matches Trusted Application (TA) driver and corresponding TA in secure OS. Drivers
 		are free to create needed API under optee-ta-<uuid> directory.
+
+What:		/sys/bus/tee/devices/optee-ta-<uuid>/need_supplicant
+Date:		November 2023
+KernelVersion:	6.7
+Contact:	[email protected]
+Description:
+		Allows to distinguish whether an OP-TEE based TA/device requires user-space
+		tee-supplicant to function properly or not. This attribute will be present for
+		devices which depend on tee-supplicant to be running.

Documentation/ABI/testing/sysfs-bus-spi-devices-spi-nor

@@ -5,6 +5,9 @@ Contact:	[email protected]
 Description:	(RO) The JEDEC ID of the SPI NOR flash as reported by the
 		flash device.
 
+		The attribute is not present if the flash doesn't support
+		the "Read JEDEC ID" command (9Fh). This is the case for
+		non-JEDEC compliant flashes.
 
 What:		/sys/bus/spi/devices/.../spi-nor/manufacturer
 Date:		April 2021

Documentation/ABI/testing/sysfs-class-devfreq

@@ -52,6 +52,9 @@ Description:
 
 			echo 0 > /sys/class/devfreq/.../trans_stat
 
+		If the transition table is bigger than PAGE_SIZE, reading
+		this will return an -EFBIG error.
+
 What:		/sys/class/devfreq/.../available_frequencies
 Date:		October 2012
 Contact:	Nishanth Menon <[email protected]>

Documentation/ABI/testing/sysfs-class-net-queues

@@ -1,4 +1,4 @@
-What:		/sys/class/<iface>/queues/rx-<queue>/rps_cpus
+What:		/sys/class/net/<iface>/queues/rx-<queue>/rps_cpus
 Date:		March 2010
 KernelVersion:	2.6.35
 Contact:	[email protected]
@@ -8,31 +8,31 @@ Description:
 		network device queue. Possible values depend on the number
 		of available CPU(s) in the system.
 
-What:		/sys/class/<iface>/queues/rx-<queue>/rps_flow_cnt
+What:		/sys/class/net/<iface>/queues/rx-<queue>/rps_flow_cnt
 Date:		April 2010
 KernelVersion:	2.6.35
 Contact:	[email protected]
 Description:
 		Number of Receive Packet Steering flows being currently
 		processed by this particular network device receive queue.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/tx_timeout
+What:		/sys/class/net/<iface>/queues/tx-<queue>/tx_timeout
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	[email protected]
 Description:
 		Indicates the number of transmit timeout events seen by this
 		network interface transmit queue.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/tx_maxrate
+What:		/sys/class/net/<iface>/queues/tx-<queue>/tx_maxrate
 Date:		March 2015
 KernelVersion:	4.1
 Contact:	[email protected]
 Description:
 		A Mbps max-rate set for the queue, a value of zero means disabled,
 		default is disabled.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/xps_cpus
+What:		/sys/class/net/<iface>/queues/tx-<queue>/xps_cpus
 Date:		November 2010
 KernelVersion:	2.6.38
 Contact:	[email protected]
@@ -42,7 +42,7 @@ Description:
 		network device transmit queue. Possible vaules depend on the
 		number of available CPU(s) in the system.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/xps_rxqs
+What:		/sys/class/net/<iface>/queues/tx-<queue>/xps_rxqs
 Date:		June 2018
 KernelVersion:	4.18.0
 Contact:	[email protected]
@@ -53,7 +53,7 @@ Description:
 		number of available receive queue(s) in the network device.
 		Default is disabled.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/hold_time
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/hold_time
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	[email protected]
@@ -62,15 +62,15 @@ Description:
 		of this particular network device transmit queue.
 		Default value is 1000.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/inflight
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/inflight
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	[email protected]
 Description:
 		Indicates the number of bytes (objects) in flight on this
 		network device transmit queue.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	[email protected]
@@ -79,7 +79,7 @@ Description:
 		on this network device transmit queue. This value is clamped
 		to be within the bounds defined by limit_max and limit_min.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit_max
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit_max
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	[email protected]
@@ -88,7 +88,7 @@ Description:
 		queued on this network device transmit queue. See
 		include/linux/dynamic_queue_limits.h for the default value.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit_min
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit_min
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	[email protected]