Materials

This wiki page summariezes all material required for a project.

ALL of them need a Raspberry Pi (with power plug, keyboard, mouse and display cable).

If you are using a Pi older than model 3, please add a Wifi modul

Photobox

• Wood or paperboard for the box
• A gphoto2 compatible camera
• LED (+ required resitors), I would recommend 5 Leds (four green and one red)
• presenter (to activate the photobox cableless)
• monitor to display the images
• soldering iron
• glue & nails
• drill, saw & hammer
• USB-Stick (to save the image)
• breadboard, switches (for prototyping)
• jumper cables (for prototyping)
• cables

SmartLight/SmartControll

• Phillips Hue (or something similiar with python plug-in)
• rotor/rotary switch
• two ultrasonic sensors ( + 2 resistors to control the sensitivity)
• usb microfon (or external webcam)
• breadboard
• jumper cable
• infared plug
• infared reciver and sender (for the Pi)

SmartMirror

• monitor
• spy mirror
• wood
• glue & nails
• drill, saw & hammer
• small angles/corners
• outlet strip
• soldering iron
• two ultrasonic sensors ( + 2 resistors to control the sensitivity)
• breadboard (for prototyping)
• jumper cables (for prototyping)
• cables
• silicone