Works this with ESP32 TNY v1.1 too ? - "No response from ESP"

[dd6ds]

ESP TNY V1.1
303ESP32C61

Hi,
is this FW: esp32c6-generic.zip work with this ESP32 too ?

Did flash with https://espressoflash.com/
but AP will not found

Ghost ESP App Version 1.4.1 on Flipper Zero

"No response from ESP"

$ sudo esptool  --port /dev/ttyACM0 flash_id
esptool.py v4.7.0
Serial port /dev/ttyACM0
Connecting...
Detecting chip type... ESP32-C6
Chip is ESP32-C6FH4 (QFN32) (revision v0.2)
Features: WiFi 6, BT 5, IEEE802.15.4
Crystal is 40MHz
MAC: fc:01:2c:ff:fe:e9:d5:a4
BASE MAC: fc:01:2c:e9:d5:a4
MAC_EXT: ff:fe
Uploading stub...
Running stub...
Stub running...
Manufacturer: 46
Device: 4016
Detected flash size: 4MB
Hard resetting via RTS pin...

Console Output with: Generic Image:

DHCP server configured successfully.
Wi-Fi Access Point started with SSID: GhostNet
ESP32 AP IP Address: 
192.168.4.1
NVS namespace 'sd_config' not found. Using default SD pins.
SD Card Pin Configuration:
MMC Mode:
  CLK: GPIO19
  CMD: GPIO18
  D0:  GPIO20
  D1:  GPIO21
  D2:  GPIO22
  D3:  GPIO23
SPI Mode:
  CS:   GPIO5
  CLK:  GPIO14
  MISO: GPIO9
  MOSI: GPIO23
Initializing SD card in SPI mode using configured pins...
E (796) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
Failed to mount filesystem: ESP_ERR_TIMEOUT
Build Name: default.esp32c6
Free heap after init: 141344 / 308924 bytes (45.8% free)
Ghost ESP Ready ;)

Console Ouput with Rabbit Labs Image:

Optionen: I18n 
Port /dev/ttyACM0, 12:58:11

Drücken Sie CTRL-A  Z für Hilfe zu speziellen Tasten
                                                                                                                                                
Global CA certificate store initialized successfully.                                                                                           
Registered Commands                                                                                                                             
W (514) SETTINGS: Using default RGB mode                                                                                                        
Failed to load Channel Delay: ESP_ERR_NVS_NOT_FOUND                                                                                             
Failed to load AP SSID
SerFailed to load AP Password
Failed to load Portal URL
Failed to load Portal SSID
Failed to load Portal Password
Failed to load Portal AP SSID
Failed to load Portal Domain
Failed to load Printer IP
Failed to load Printer Text
Failed to load Flappy Ghost Name
Failed to load Hex Accent Color String
Settings loaded from NVS.
Settings loaded successfully.
NVS Storage: 109/882 entries used (12.4%)
No saved WiFi credentials found
I: ESP Comm Manager initialized as 'ESP_E9D5A4' on TX:6 RX:7 at 921600 baud - Auto-listening for peers
Wi-Fi already initialized, skipping Wi-Fi init.
ial Started..DHCP server configured successfully.
Wi-Fi Access Point started with SSID: GhostNet
ESP32 AP IP Address: 
192.168.4.1NVS namespace 'sd_config' not found. Using default SD pins.
SD Card Pin Configuration:
MMC Mode:
  CLK: GPIO19
  CMD: GPIO18
  D0:  GPIO20
  D1:  GPIO21
  D2:  GPIO22
  D3:  GPIO23
SPI Mode:
  CS:   GPIO23
  CLK:  GPIO19
  MISO: GPIO20
  MOSI: GPIO18
Initializing SD card in SPI mode using configured pins...
E (994) sdmmc_sd: sdmmc_init_sd_if_cond: send_if_cond (1) returned 0x108
E (994) vfs_fat_sdmmc: sdmmc_card_init failed (0x108).
Failed to mount filesystem: ESP_ERR_INVALID_RESPONSE
Build Name: ghostboard
Free heap after init: 182112 / 323324 bytes (56.3% free)
Ghost ESP Ready ;)

Can See a WiFi: GhostNet
but PW ??? tryed with same es WiFi name.... did not work

[jaylikesbunda]

i don't have a c61 myself so i can't test this and it's not officially supported in our list so that might be why i would assume. thanks for giving me a reason to pick one up though

[dd6ds]

thanks