Will HomeAssistant OS consider supporting RK3588/RK3588s/RK3582 in the future?

[kkkkllll00]

Will HomeAssistant OS consider supporting RK3588/RK3588s/RK3582 in the future?
like ODROID-M2, or radxa’s rock5c

[sairon]

Currently there are no plans to support those, as even the older ODROID models are used with HAOS only by a handful of users. You can still use them e.g. for Supervised install, where you can also benefit from the possibility to use the downstream Linux with Rockchip NPU support (which is also unlikely to come to HAOS, unless the driver would be mainlined).

[Gazoonky]

This is disappointing to read. Changing from Rpi to odroid transformed my HA experience and the M2 is something I'd be keen to get - faster and with more memory. I know I could move to NUC but odroid is a cheaper option.
There are presumably enough odroid users to have justified supporting odroid, why not with their latest hardware ?

[mxcxpx]

badly that it will never be supported. i bought it 2 month ago. and now it rest in the closet

[netadvanced]

You can get it to work with Armbian (Bookworm), mine works very well.
I followed the following link at the time, hope this helps.

Head-up: I think to remember that I had to change the /etc/os-release file and change some values like NAME="Debian GNU/Linux", my brain is foggy it's been a while.

[netadvanced]

Just needed to install it again, the trick is once you installed Armbian including latest updates.
From the link stated above:

• Update to latest version:
  sudo -i
apt update && apt upgrade -y && apt autoremove -y

• reboot to make sure new kernel is active

• Then install required libs/apps
  sudo -i
apt --fix-broken install
apt install apparmor jq wget curl udisks2 libglib2.0-bin network-manager dbus lsb-release systemd-journal-remote systemd-resolved -y

• Now we'll install Docker
  curl -fsSL get.docker.com | sh

• Get and install HASS OS-Agent
  wget https://github.com/home-assistant/os-agent/releases/download/1.6.0/os-agent_1.6.0_linux_x86_64.deb
dpkg -i os-agent_1.6.0_linux_x86_64.deb

• Update the /etc/os-release file

  • Change the PRETTY_NAME to "Debian GNU/Linux 12 (bookworm)" instead of the Armbian one.
  • ** This one is important, HA won't install if the string is different.

• Now get and try to install HASS
  wget https://github.com/home-assistant/supervised-installer/releases/latest/download/homeassistant-supervised.deb
apt install ./homeassistant-supervised.deb

[akshar001]

Hey, guys. We are Vicharak. We have RK3588 based Single Board Computer called Axon and are commited to bring software support like Raspberry Pi into the eco-system. Because we still believe RK3588 has most notable SOC features that home-assistant community can adopt to it. We already have added a support of Balena Io.

[akshar001]

Adding here, we’ve made an image that has full-scale HomeAssistant support. We’ll post the full video here soon. Users can leverage full-scale scalability with our SBC and their different hats.
@vicharak-in
Axon

• 1x 2.5Gbit Ethernet over PCIe Gen 2 that we’ve, you can still use NVMe natively with this.
• PCIe Gen3x4 high-speed NVMe SSD support, technically, you can store long ranges of video recordings and doorbell content directly on this.
• The coolest thing we’ve is native SATA HDD support with our $4 hat. You can directly plug in your magnetic HDD into Axon, allowing you to do more recordings.
• We’re planning to work on cool ideas like supporting 1.5–3B local LLM versions directly on LocalLLM models here. We’ve Whisper support out there too, so ESPHome + Whisper + LocalLLM now allows you to control your devices locally. (Maybe not exciting for everyone, but by doing that, you control your data, and LocalLLM gives you more flexibility.)
• Overall some of them can be useful for a community some of them or not, our goal is to provide the benefits of our boards to community in every way possible.

[iaakki]

Any news on this? I'd love to run my HA on Rk3588.

[nyok92]

Hi all,
I am trying to build locally HAOS 16.3 for rock5b (rk3588)
myfork

I am far away to understand buildroot and kernel config requirements.
I try to understand others forks & replicate but as expected for a newbie like me this is not working so far.
Trying to build with 6.1 (amrbian vendor kernel) & maybe with mainline 6.18 (the rk3588 NPU driver has been merged).
If there is anyone that could give me some advices to achieve this ? :)
Thanks for any tips

[tsunglung]

Applying cmd-fileenv-read-string-from-file-into-env.patch using patch:

fileenv was needed by uboot boot script.
try to update to latest commit of operating-system to get the fix.

[nyok92]

I managed to build the haos image. I've just stayed on 6.18kernel for now as I didn't managed to build on 7.x. Burnt it to SD card but the rock5b is not booting on haos. Will continue troubleshooting and learning at the same time.

[iaakki]

Wow! Good job. I just gave in and made a new haos server from old lenovo laptop. Backup restore worked great.

[nyok92]

I have to troubleshoot the following boot issue if you have any advices :

I've cleared SPI, the Rock5b seems to boot on the SPI/uboot included in the SD Card but doesn't proceed to the linux system image

I think there must be some errors in :
https://github.com/nyok92/HAOS-rock5b/blob/dev/buildroot-external/board/radxa/rock5b/image-spl-spl.cfg
https://github.com/nyok92/HAOS-rock5b/blob/dev/buildroot-external/board/radxa/rock5b/partition-spl-spl.cfg
and maybe :
https://github.com/nyok92/HAOS-rock5b/blob/dev/buildroot-external/board/radxa/rock5b/uboot-boot.ush

I saw an error regarding ERROR:

• Error initializing runtime service opteed_fast
• Unknown command 'fileenv'
• Unknown command 'setexpr'
• Can't set block device when trying to boot from HAOS slot A/B

DDR ff1a08bde6 typ 25/03/13-15:39:39,fwver: v1.19
ch0 ttot10
ch1 ttot10
ch2 ttot10
ch3 ttot10
ch0 ttot16
LPDDR4X, 2112MHz
channel[0] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB
ch1 ttot16
channel[1] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB
ch2 ttot18
channel[2] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB
ch3 ttot18
channel[3] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB
Manufacturer ID:0x6
DQS rds:l0,h1
CH0 RX Vref:27.5%, TX Vref:25.8%,25.8%
DQ rds:h2 h1 h7 h6 h2 l0 h6 l0, h2 h4 l0 h2 h1 h2 h3 h3

DQS rds:h2,h3
CH1 RX Vref:27.9%, TX Vref:26.8%,25.8%
DQ rds:h1 h1 h3 h2 l0 h7 h3 h1, h3 h4 h4 h7 l0 h2 l1 h4

DQS rds:l0,l0
CH2 RX Vref:27.9%, TX Vref:23.8%,23.8%
DQ rds:h3 h1 h4 h3 h3 h6 h2 h6, l0 h5 h1 h3 h2 h3 h1 h1

DQS rds:h1,l0
CH3 RX Vref:29.3%, TX Vref:24.8%,23.8%
DQ rds:h1 l0 h2 h4 h6 h3 h2 h2, h5 l0 h1 h2 h3 h3 h2 h1

stride=0x2, ddr_config=0x4
hash ch_mask0-1 0x20 0x40, bank_mask0-3 0xa00 0x1400 0x2800 0x0, rank_mask0 0x40                                                                                                       1000
change to F1: 528MHz
ch0 ttot10
ch1 ttot10
ch2 ttot10
ch3 ttot10
change to F2: 1068MHz
ch0 ttot14
ch1 ttot14
ch2 ttot14
ch3 ttot14
change to F3: 1560MHz
ch0 ttot16
ch1 ttot16
ch2 ttot16
ch3 ttot16
change to F0: 2112MHz
ch0 ttot18
ch1 ttot18
ch2 ttot18
ch3 ttot18
out

U-Boot SPL 2026.04 (Jun 18 2026 - 16:18:22 +0000)
Trying to boot from MMC2
## Checking hash(es) for config config-1 ... OK
## Checking hash(es) for Image atf-1 ... sha256+ OK
## Checking hash(es) for Image u-boot ... sha256+ OK
## Checking hash(es) for Image fdt-1 ... sha256+ OK
## Checking hash(es) for Image atf-2 ... sha256+ OK
## Checking hash(es) for Image atf-3 ... sha256+ OK
INFO:    Preloader serial: 2
NOTICE:  BL31: v2.3():v2.3-924-gbc6030fac:derrick.huang, fwver: v1.51
NOTICE:  BL31: Built : 17:48:01, Apr 25 2025
INFO:    spec: 0x1
INFO:    code: 0x88
INFO:    customer demand: 0x0
INFO:    ext 32k is not valid
INFO:    ddr: stride-en 4CH
INFO:    GICv3 without legacy support detected.
INFO:    ARM GICv3 driver initialized in EL3
INFO:    valid_cpu_msk=0xff bcore0_rst = 0x0, bcore1_rst = 0x0
INFO:    l3 cache partition cfg-0
INFO:    system boots from cpu-hwid-0
INFO:    disable memory repair
INFO:    idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001
INFO:    dfs DDR fsp_params[0].freq_mhz= 2112MHz
INFO:    dfs DDR fsp_params[1].freq_mhz= 528MHz
INFO:    dfs DDR fsp_params[2].freq_mhz= 1068MHz
INFO:    dfs DDR fsp_params[3].freq_mhz= 1560MHz
INFO:    BL31: Initialising Exception Handling Framework
INFO:    BL31: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE init                                                                                                       ialization. SMC`s destined for OPTEE will return SMC_UNK
ERROR:   Error initializing runtime service opteed_fast
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x800000
INFO:    SPSR = 0x3c9


U-Boot 2026.04 (Jun 18 2026 - 16:18:22 +0000)

Model: Radxa ROCK 5B
SoC:   RK3588
DRAM:  16 GiB
Core:  818 devices, 34 uclasses, devicetree: separate
MMC:   mmc@fe2c0000: 1, mmc@fe2d0000: 2, mmc@fe2e0000: 0
Loading Environment from nowhere... OK
In:    serial@feb50000
Out:   serial@feb50000
Err:   serial@feb50000
Model: Radxa ROCK 5B
SoC:   RK3588
Net:   No ethernet found.
Hit any key to stop autoboot: 0
Scanning for bootflows in all bootdevs
Seq  Method       State   Uclass    Part  Name                      Filename
---  -----------  ------  --------  ----  ------------------------  ------------                                                                                                       ----
Scanning global bootmeth 'efi_mgr':
Card did not respond to voltage select! : -110
Card did not respond to voltage select! : -110
  0  efi_mgr      ready   (none)       0  <NULL>
** Booting bootflow '<NULL>' with efi_mgr
Loading Boot0000 'mmc 1' failed
EFI boot manager: Cannot load any image
Boot failed (err=-14)
Scanning bootdev '[email protected]':
  1  script       ready   mmc          1  [email protected] /boot.scr
** Booting bootflow '[email protected]_1' with script
switch to partitions #0, OK
mmc1 is current device
loading env...
MMC read: dev # 1, block # 1212416, count 64 ... 64 blocks read: OK
loading environment from haos-config.txt
389 bytes read in 1 ms (379.9 KiB/s)
Unknown command 'fileenv' - try 'help'
Loading standard device tree rk3588-rock-5b.dtb
186282 bytes read in 18 ms (9.9 MiB/s)
Working FDT set to 12000000
Unknown command 'setexpr' - try 'help'
Trying to boot slot A, 3 attempts remaining. Loading kernel ...
Can't set block device
Unknown command 'setexpr' - try 'help'
Trying to boot slot B, 3 attempts remaining. Loading kernel ...
Can't set block device
No valid slot found, resetting tries to 3
storing env...
MMC write: dev # 1, block # 1212416, count 64 ... 64 blocks written: OK
resetting ...

[nyok92]

Made some progress, but actually kernel is not starting and boot/uboot process stays in a loop

DDR ff1a08bde6 typ 25/03/13-15:39:39,fwver: v1.19
ch0 ttot10
ch1 ttot10
ch2 ttot10
ch3 ttot10
ch0 ttot18
LPDDR4X, 2112MHz
channel[0] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB
ch1 ttot16
channel[1] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB
ch2 ttot18
channel[2] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB
ch3 ttot18
channel[3] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB
Manufacturer ID:0x6
DQS rds:l0,h1
CH0 RX Vref:27.1%, TX Vref:25.8%,25.8%
DQ rds:h1 l0 h4 h3 h1 l1 h4 l1, h1 h5 l0 h2 l0 h1 h2 h2

DQS rds:h2,h3
CH1 RX Vref:27.5%, TX Vref:25.8%,25.8%
DQ rds:h2 l0 h2 h1 l0 h7 h3 h1, h3 h4 h3 h6 l0 h2 l0 h4

DQS rds:l0,h1
CH2 RX Vref:27.5%, TX Vref:24.8%,23.8%
DQ rds:h3 h1 h6 h4 h4 h7 h3 h7, h1 h4 h1 h3 h3 h3 h2 h2

DQS rds:h1,l0
CH3 RX Vref:28.9%, TX Vref:23.8%,23.8%
DQ rds:h1 l0 h2 h6 h6 h3 h1 h1, h4 l0 h1 h2 h3 h3 h2 h1

stride=0x2, ddr_config=0x4
hash ch_mask0-1 0x20 0x40, bank_mask0-3 0xa00 0x1400 0x2800 0x0, rank_mask0 0x40                                                                                                                                        1000
change to F1: 528MHz
ch0 ttot10
ch1 ttot10
ch2 ttot10
ch3 ttot10
change to F2: 1068MHz
ch0 ttot14
ch1 ttot14
ch2 ttot14
ch3 ttot14
change to F3: 1560MHz
ch0 ttot16
ch1 ttot16
ch2 ttot16
ch3 ttot16
change to F0: 2112MHz
ch0 ttot18
ch1 ttot18
ch2 ttot18
ch3 ttot18
out

U-Boot SPL 2026.04 (Jun 19 2026 - 21:39:22 +0000)
Trying to boot from MMC2
## Checking hash(es) for config config-1 ... OK
## Checking hash(es) for Image atf-1 ... sha256+ OK
## Checking hash(es) for Image u-boot ... sha256+ OK
## Checking hash(es) for Image fdt-1 ... sha256+ OK
## Checking hash(es) for Image atf-2 ... sha256+ OK
## Checking hash(es) for Image atf-3 ... sha256+ OK
## Checking hash(es) for Image tee-1 ... sha256+ OK
INFO:    Preloader serial: 2
NOTICE:  BL31: v2.3():v2.3-924-gbc6030fac:derrick.huang, fwver: v1.51
NOTICE:  BL31: Built : 17:48:01, Apr 25 2025
INFO:    spec: 0x1
INFO:    code: 0x88
INFO:    customer demand: 0x0
INFO:    ext 32k is not valid
INFO:    ddr: stride-en 4CH
INFO:    GICv3 without legacy support detected.
INFO:    ARM GICv3 driver initialized in EL3
INFO:    valid_cpu_msk=0xff bcore0_rst = 0x0, bcore1_rst = 0x0
INFO:    l3 cache partition cfg-0
INFO:    system boots from cpu-hwid-0
INFO:    disable memory repair
INFO:    idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001
INFO:    dfs DDR fsp_params[0].freq_mhz= 2112MHz
INFO:    dfs DDR fsp_params[1].freq_mhz= 528MHz
INFO:    dfs DDR fsp_params[2].freq_mhz= 1068MHz
INFO:    dfs DDR fsp_params[3].freq_mhz= 1560MHz
INFO:    BL31: Initialising Exception Handling Framework
INFO:    BL31: Initializing runtime services
INFO:    BL31: Initializing BL32
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x800000
INFO:    SPSR = 0x3c9


U-Boot 2026.04 (Jun 19 2026 - 21:39:22 +0000)

DRAM:  16 GiB
Core:  816 devices, 34 uclasses, devicetree: separate
MMC:   mmc@fe2c0000: 1, mmc@fe2d0000: 2, mmc@fe2e0000: 0
Loading Environment from nowhere... OK
In:    serial@feb50000
Out:   serial@feb50000
Err:   serial@feb50000
Model: Radxa ROCK 5B
SoC:   RK3588
Net:   No ethernet found.
Scanning for bootflows in all bootdevs
Seq  Method       State   Uclass    Part  Name                      Filename
---  -----------  ------  --------  ----  ------------------------  ------------                                                                                                                                        ----
Scanning bootdev '[email protected]':
  0  script       ready   mmc          2  [email protected] /boot.scr
** Booting bootflow '[email protected]_2' with script
switch to partitions #0, OK
mmc1 is current device
loading env...
MMC read: dev # 1, block # 1214464, count 64 ... 64 blocks read: OK
loading environment from haos-config.txt
389 bytes read in 2 ms (189.5 KiB/s)
27 bytes read in 1 ms (26.4 KiB/s)
Loading standard device tree rk3588-rock-5b.dtb
186282 bytes read in 18 ms (9.9 MiB/s)
Working FDT set to 12000000
Trying to boot slot A, 1 attempts remaining. Loading kernel ...
31222272 bytes read in 1626 ms (18.3 MiB/s)
storing env...
MMC write: dev # 1, block # 1214464, count 64 ... 64 blocks written: OK
Starting kernel
## Flattened Device Tree blob at 12000000
   Booting using the fdt blob at 0x12000000
Working FDT set to 12000000
   Loading Device Tree to 00000000ecb3b000, end 00000000ecbd0fff ... OK
Working FDT set to ecb3b000

Starting kernel ...

[nyok92]

Grab boot Logs with Earlycon, it seems that Linux is not booting.
Maybe Entry point address = 0x800000 is not right for the Rock5b
If anyone has an idea why HAOS is not booting.
Here is my Github Repo

DDR cb12b99cc23 hcy 25/10/17-18:57:13,fwver: v1.21
ch0 ttot10
ch1 ttot10
ch2 ttot10
ch3 ttot10
ch0 ttot18
LPDDR4X, 2112MHz
channel[0] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB
ch1 ttot18
channel[1] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB
ch2 ttot18
channel[2] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB
ch3 ttot18
channel[3] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB
Manufacturer ID:0x6
DQS rds:l0,h1
CH0 RX Vref:27.5%, TX Vref:25.8%,25.8%
DQ rds:h1 l0 h6 h5 h1 l0 h6 l0, h2 h5 l0 h2 h1 h2 h2 h3

DQS rds:h2,h3
CH1 RX Vref:26.7%, TX Vref:25.8%,25.8%
DQ rds:h1 l0 h1 h1 l0 h5 h2 h1, h2 h3 h2 h5 l0 h2 l1 h3

DQS rds:l0,h1
CH2 RX Vref:27.5%, TX Vref:24.8%,23.8%
DQ rds:h3 h1 h6 h3 h4 h7 h3 h7, l0 h4 h1 h4 h2 h3 h1 h1

DQS rds:h1,l0
CH3 RX Vref:29.3%, TX Vref:23.8%,23.8%
DQ rds:l0 l0 h2 h4 h6 h3 h2 h1, h5 l0 h1 h2 h3 h4 h2 h1

stride=0x2, ddr_config=0x4
hash ch_mask0-1 0x20 0x40, bank_mask0-3 0xa00 0x1400 0x2800 0x0, rank_mask0 0x40                                                                                                                                    1000
change to F1: 528MHz
ch0 ttot10
ch1 ttot10
ch2 ttot10
ch3 ttot10
change to F2: 1068MHz
ch0 ttot14
ch1 ttot14
ch2 ttot14
ch3 ttot14
change to F3: 1560MHz
ch0 ttot16
ch1 ttot16
ch2 ttot16
ch3 ttot16
change to F0: 2112MHz
ch0 ttot18
ch1 ttot18
ch2 ttot18
ch3 ttot18
out

U-Boot SPL 2026.04 (Jun 26 2026 - 16:47:47 +0000)
Trying to boot from MMC2
## Checking hash(es) for config config-1 ... OK
## Checking hash(es) for Image atf-1 ... sha256+ OK
## Checking hash(es) for Image u-boot ... sha256+ OK
## Checking hash(es) for Image fdt-1 ... sha256+ OK
## Checking hash(es) for Image atf-2 ... sha256+ OK
## Checking hash(es) for Image atf-3 ... sha256+ OK
## Checking hash(es) for Image tee-1 ... sha256+ OK
INFO:    Preloader serial: 2
NOTICE:  BL31: v2.3():v2.3-964-g8319968f5:derrick.huang, fwver: v1.54
NOTICE:  BL31: Built : 17:20:23, Dec 26 2025
INFO:    spec: 0x1
INFO:    code: 0x88
INFO:    customer demand: 0x0
INFO:    ext 32k is not valid
INFO:    ddr: stride-en 4CH
INFO:    GICv3 without legacy support detected.
INFO:    ARM GICv3 driver initialized in EL3
INFO:    valid_cpu_msk=0xff bcore0_rst = 0x0, bcore1_rst = 0x0
INFO:    l3 cache partition cfg-0
INFO:    system boots from cpu-hwid-0
INFO:    disable memory repair
INFO:    idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001
INFO:    dfs DDR fsp_params[0].freq_mhz= 2112MHz
INFO:    dfs DDR fsp_params[1].freq_mhz= 528MHz
INFO:    dfs DDR fsp_params[2].freq_mhz= 1068MHz
INFO:    dfs DDR fsp_params[3].freq_mhz= 1560MHz
INFO:    BL31: Initialising Exception Handling Framework
INFO:    BL31: Initializing runtime services
INFO:    BL31: Initializing BL32
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x800000
INFO:    SPSR = 0x3c9


U-Boot 2026.04 (Jun 26 2026 - 16:47:47 +0000)

DRAM:  16 GiB
Core:  816 devices, 34 uclasses, devicetree: separate
MMC:   mmc@fe2c0000: 1, mmc@fe2d0000: 2, mmc@fe2e0000: 0
Loading Environment from nowhere... OK
In:    serial@feb50000
Out:   serial@feb50000
Err:   serial@feb50000
Model: Radxa ROCK 5B
SoC:   RK3588
Net:   No ethernet found.
Scanning for bootflows in all bootdevs
Seq  Method       State   Uclass    Part  Name                      Filename
---  -----------  ------  --------  ----  ------------------------  ----------------
Scanning bootdev '[email protected]':
  0  script       ready   mmc          1  [email protected] /boot.scr
** Booting bootflow '[email protected]_1' with script
switch to partitions #0, OK
mmc1 is current device
loading env...
MMC read: dev # 1, block # 1212416, count 64 ... 64 blocks read: OK
loading environment from haos-config.txt
738 bytes read in 2 ms (360.4 KiB/s)
46 bytes read in 2 ms (22.5 KiB/s)
Loading standard device tree rk3588-rock-5b.dtb
186282 bytes read in 19 ms (9.3 MiB/s)
Working FDT set to 12000000
Trying to boot slot A, 1 attempts remaining. Loading kernel ...
32279040 bytes read in 1774 ms (17.4 MiB/s)
storing env...
MMC write: dev # 1, block # 1212416, count 64 ... 64 blocks written: OK
Starting kernel with args zram.enabled=1 zram.num_devices=3 systemd.machine_id= fsck.repair=yes systemd.condition-first-boot=true root=PARTUUID=8d3d53e3-6d49-4c38-8349-aff6                                        859e82fd ro rootwait rauc.slot=A earlycon console=ttyS0,1500000n8 console=tty0
## Flattened Device Tree blob at 12000000
   Booting using the fdt blob at 0x12000000
Working FDT set to 12000000
   Loading Device Tree to 00000000ecb3a000, end 00000000ecbcffff ... OK
Working FDT set to ecb3a000

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[    0.000000] Linux version 6.18.36-haos (builder@9e946987a689) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2024.08-rc1-4983-g77d777cc1c) 13.4.0, GNU ld (GNU Binut                                        ils) 2.43.1) #1 SMP PREEMPT Fri Jun 26 22:06:49 UTC 2026
[    0.000000] KASLR enabled
[    0.000000] Machine model: Radxa ROCK 5B
[    0.000000] efi: UEFI not found.
[    0.000000] Reserved memory: created DMA memory pool at 0x00000000e2b00000, size 160 MiB
[    0.000000] OF: reserved mem: initialized node hdmi-receiver-cma, compatible id shared-dma-pool
[    0.000000] OF: reserved mem: 0x00000000e2b00000..0x00000000ecafffff (163840 KiB) nomap non-reusable hdmi-receiver-cma
[    0.000000] earlycon: uart0 at MMIO32 0x00000000feb50000 (options '1500000n8')
[    0.000000] printk: legacy bootconsole [uart0] enabled
[    0.000000] OF: reserved mem: 0x000000000010f000..0x000000000010f0ff (0 KiB) nomap non-reusable shmem@10f000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000200000-0x00000000ffffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   [mem 0x0000000100000000-0x00000004ffffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000200000-0x00000000e2afffff]
[    0.000000]   node   0: [mem 0x00000000e2b00000-0x00000000ecafffff]
[    0.000000]   node   0: [mem 0x00000000ecb00000-0x00000000efffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x00000003fbffffff]
[    0.000000]   node   0: [mem 0x00000003fc500000-0x00000003ffefffff]
[    0.000000]   node   0: [mem 0x00000004f0000000-0x00000004ffffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000004ffffffff]
[    0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
[    0.000000] On node 0, zone Normal: 1280 pages in unavailable ranges
[    0.000000] On node 0, zone Normal: 256 pages in unavailable ranges
[    0.000000] cma: Reserved 384 MiB at 0x00000000caa00000
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] psci: SMC Calling Convention v1.2
[    0.000000] percpu: Embedded 25 pages/cpu s62488 r8192 d31720 u102400
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GICv3 CPU interface
[    0.000000] CPU features: detected: Virtualization Host Extensions
[    0.000000] CPU features: kernel page table isolation forced ON by KASLR
[    0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] alternatives: applying boot alternatives
[    0.000000] Kernel command line: zram.enabled=1 zram.num_devices=3 systemd.machine_id= fsck.repair=yes systemd.condition-first-boot=true root=PARTUUID=8d3d53e3-6d49-4c38                                        -8349-aff6859e82fd ro rootwait rauc.slot=A earlycon console=ttyS0,1500000n8 console=tty0
[    0.000000] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes
[    0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.000000] software IO TLB: area num 8.
[    0.000000] software IO TLB: mapped [mem 0x00000000c6a00000-0x00000000caa00000] (64MB)
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 4192256
[    0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000]  Trampoline variant of Tasks RCU enabled.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
[    0.000000] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GIC: enabling workaround for GICv3: non-coherent attribute
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 480 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: MBI range [424:479]
[    0.000000] GICv3: Using MBI frame 0x00000000fe610000
[    0.000000] Root IRQ handler: gic_handle_irq
[    0.000000] GICv3: GICv3 features: 16 PPIs
[    0.000000] GICv3: GICD_CTLR.DS=0, SCR_EL3.FIQ=1
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000
[    0.000000] ITS [mem 0xfe640000-0xfe65ffff]
[    0.000000] GIC: enabling workaround for ITS: Rockchip erratum RK3588001
[    0.000000] GIC: enabling workaround for ITS: non-coherent attribute
[    0.000000] ITS@0x00000000fe640000: allocated 8192 Devices @3fc580000 (indirect, esz 8, psz 64K, shr 0)
[    0.000000] ITS@0x00000000fe640000: allocated 32768 Interrupt Collections @3fc590000 (flat, esz 2, psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] ITS [mem 0xfe660000-0xfe67ffff]
[    0.000000] GIC: enabling workaround for ITS: Rockchip erratum RK3588001
[    0.000000] GIC: enabling workaround for ITS: non-coherent attribute
[    0.000000] ITS@0x00000000fe660000: allocated 8192 Devices @3fc5b0000 (indirect, esz 8, psz 64K, shr 0)
[    0.000000] ITS@0x00000000fe660000: allocated 32768 Interrupt Collections @3fc5c0000 (flat, esz 2, psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GICv3: using LPI property table @0x00000003fc5d0000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000003fc5e0000
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@100[1] /cpus/cpu@200[2] /cpus/cpu@300[3] }
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@400[4] /cpus/cpu@500[5] /cpus/cpu@600[6] /cpus/cpu@700[7] }
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] arch_timer: cp15 timer running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.003753] Console: colour dummy device 80x25
[    0.004188] printk: legacy console [tty0] enabled
[    0.004641] printk: legacy bootconsole [uart0] disabled

[tsunglung]

check your console configuration in cmdline and "chosen" in dts.

chosen {
    stdout-path = "serial2:1500000n8";
};

The cmdline shall be use ttyS2

console=ttyS2,1500000n8 console=tty0

Here is the haos boot log from FriendlyElec NanoPi M5.
haos-friendlyelec-nanopi-m5-boot.log

And cmdline.txt is as the following

console=ttyS0,1500000n8 console=tty0

[nyok92]

I manage to get more logs, but will need to learn and try to see where is my issue.
With the same built bootloaders loaded in SPI : u-boot-rockchip-spi
I manage to get armbian loading and working.
So I htink there must be something wrong with kernet boot or an issue with the HAOS uboot-boot.ush

In the same time, tried Grub bootloader but it seems not working either

DDR cb12b99cc23 hcy 25/10/17-18:57:13,fwver: v1.21
ch0 ttot10
ch1 ttot10
ch2 ttot10
ch3 ttot10
ch0 ttot18
LPDDR4X, 2112MHz
channel[0] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB
ch1 ttot16
channel[1] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB
ch2 ttot18
channel[2] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB
ch3 ttot18
channel[3] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB
Manufacturer ID:0x6
DQS rds:l0,h1
CH0 RX Vref:27.9%, TX Vref:25.8%,25.8%
DQ rds:h1 l0 h6 h5 h1 l0 h5 l0, h2 h4 l0 h2 h1 h2 h2 h3

DQS rds:h2,h3
CH1 RX Vref:27.5%, TX Vref:25.8%,25.8%
DQ rds:h1 h1 h3 h2 l0 h7 h4 h1, h3 h4 h4 h6 l0 h3 l1 h4

DQS rds:l0,h1
CH2 RX Vref:27.5%, TX Vref:24.8%,23.8%
DQ rds:h4 h1 h6 h4 h4 h7 h3 h7, l0 h4 h1 h3 h3 h2 h1 h1

DQS rds:h1,l0
CH3 RX Vref:29.3%, TX Vref:23.8%,23.8%
DQ rds:l0 l0 h3 h5 h6 h3 h2 h2, h5 l0 h1 h2 h3 h4 h2 h1

stride=0x2, ddr_config=0x4
hash ch_mask0-1 0x20 0x40, bank_mask0-3 0xa00 0x1400 0x2800 0x0, rank_mask0 0x40                                                                                                                                    1000
change to F1: 528MHz
ch0 ttot10
ch1 ttot10
ch2 ttot10
ch3 ttot10
change to F2: 1068MHz
ch0 ttot14
ch1 ttot14
ch2 ttot14
ch3 ttot14
change to F3: 1560MHz
ch0 ttot16
ch1 ttot16
ch2 ttot16
ch3 ttot16
change to F0: 2112MHz
ch0 ttot18
ch1 ttot18
ch2 ttot18
ch3 ttot18
out

U-Boot SPL 2026.04 (Jun 26 2026 - 07:09:33 +0000)
Trying to boot from SPI
## Checking hash(es) for config config-1 ... OK
## Checking hash(es) for Image atf-1 ... sha256+ OK
## Checking hash(es) for Image u-boot ... sha256+ OK
## Checking hash(es) for Image fdt-1 ... sha256+ OK
## Checking hash(es) for Image atf-2 ... sha256+ OK
## Checking hash(es) for Image atf-3 ... sha256+ OK
## Checking hash(es) for Image tee-1 ... sha256+ OK
NOTICE:  BL31: v2.15.0(release):v2.15.0
NOTICE:  BL31: Built : 21:18:59, Jun 25 2026


U-Boot 2026.04 (Jun 26 2026 - 07:09:33 +0000)

DRAM:  16 GiB
Core:  816 devices, 34 uclasses, devicetree: separate
MMC:   mmc@fe2c0000: 1, mmc@fe2d0000: 2, mmc@fe2e0000: 0
Loading Environment from nowhere... OK
In:    serial@feb50000
Out:   serial@feb50000
Err:   serial@feb50000
Model: Radxa ROCK 5B
SoC:   RK3588
Net:   No ethernet found.
Scanning for bootflows in all bootdevs
Seq  Method       State   Uclass    Part  Name                      Filename
---  -----------  ------  --------  ----  ------------------------  ------------                                                                                                                                    ----
Scanning bootdev '[email protected]':
  0  script       ready   mmc          1  [email protected] /boot.scr
** Booting bootflow '[email protected]_1' with script
switch to partitions #0, OK
mmc1 is current device
loading env...
MMC read: dev # 1, block # 1212416, count 64 ... 64 blocks read: OK
## Error: bad CRC, import failed
loading environment from haos-config.txt
738 bytes read in 2 ms (360.4 KiB/s)
45 bytes read in 1 ms (43.9 KiB/s)
Loading standard device tree rk3588-rock-5b.dtb
186282 bytes read in 19 ms (9.3 MiB/s)
Working FDT set to 12000000
Trying to boot slot A, 2 attempts remaining. Loading kernel ...
32279040 bytes read in 1757 ms (17.5 MiB/s)
storing env...
MMC write: dev # 1, block # 1212416, count 64 ... 64 blocks written: OK
Starting kernel with args zram.enabled=1 zram.num_devices=3 systemd.machine_id= fsck.repair=yes systemd.condition-first-boot=true root=PARTUUID=8d3d53e3-6d49-4c38-8349-aff6859e8                                   2fd ro rootwait rauc.slot=A earlycon earlyprintk console=ttyS0,1500000n8
## Flattened Device Tree blob at 12000000
   Booting using the fdt blob at 0x12000000
Working FDT set to 12000000
   Loading Device Tree to 00000000ecb3b000, end 00000000ecbd0fff ... OK
Working FDT set to ecb3b000

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[    0.000000] Linux version 6.18.36-haos (builder@cc887d72a593) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2024.08-rc1-4983-g77d777cc1c) 13.4.0, GNU ld (GNU Binutils)                                    2.43.1) #1 SMP PREEMPT Sat Jun 27 12:41:30 UTC 2026
[    0.000000] KASLR enabled
[    0.000000] Machine model: Radxa ROCK 5B
[    0.000000] efi: UEFI not found.
[    0.000000] Reserved memory: created DMA memory pool at 0x00000000e2b00000, size 160 MiB
[    0.000000] OF: reserved mem: initialized node hdmi-receiver-cma, compatible id shared-dma-pool
[    0.000000] OF: reserved mem: 0x00000000e2b00000..0x00000000ecafffff (163840 KiB) nomap non-reusable hdmi-receiver-cma
[    0.000000] earlycon: uart0 at MMIO32 0x00000000feb50000 (options '1500000n8')
[    0.000000] printk: legacy bootconsole [uart0] enabled
[    0.000000] OF: reserved mem: 0x000000000010f000..0x000000000010f0ff (0 KiB) nomap non-reusable shmem@10f000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000200000-0x00000000ffffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   [mem 0x0000000100000000-0x00000004ffffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000200000-0x00000000e2afffff]
[    0.000000]   node   0: [mem 0x00000000e2b00000-0x00000000ecafffff]
[    0.000000]   node   0: [mem 0x00000000ecb00000-0x00000000efffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x00000003fbffffff]
[    0.000000]   node   0: [mem 0x00000003fc500000-0x00000003ffefffff]
[    0.000000]   node   0: [mem 0x00000004f0000000-0x00000004ffffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000004ffffffff]
[    0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
[    0.000000] On node 0, zone Normal: 1280 pages in unavailable ranges
[    0.000000] On node 0, zone Normal: 256 pages in unavailable ranges
[    0.000000] cma: Reserved 384 MiB at 0x00000000caa00000
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] percpu: Embedded 25 pages/cpu s62488 r8192 d31720 u102400
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GICv3 CPU interface
[    0.000000] CPU features: detected: Virtualization Host Extensions
[    0.000000] CPU features: kernel page table isolation forced ON by KASLR
[    0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] alternatives: applying boot alternatives
[    0.000000] Kernel command line: zram.enabled=1 zram.num_devices=3 systemd.machine_id= fsck.repair=yes systemd.condition-first-boot=true root=PARTUUID=8d3d53e3-6d49-4c38-8349                                   -aff6859e82fd ro rootwait rauc.slot=A earlycon earlyprintk console=ttyS0,1500000n8
[    0.000000] Unknown kernel command line parameters "earlyprintk", will be passed to user space.
[    0.000000] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes
[    0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.000000] software IO TLB: area num 8.
[    0.000000] software IO TLB: mapped [mem 0x00000000c6a00000-0x00000000caa00000] (64MB)
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 4192256
[    0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000]  Trampoline variant of Tasks RCU enabled.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
[    0.000000] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GIC: enabling workaround for GICv3: non-coherent attribute
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 480 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: MBI range [424:479]
[    0.000000] GICv3: Using MBI frame 0x00000000fe610000
[    0.000000] Root IRQ handler: gic_handle_irq
[    0.000000] GICv3: GICv3 features: 16 PPIs
[    0.000000] GICv3: GICD_CTLR.DS=0, SCR_EL3.FIQ=0
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000
[    0.000000] ITS [mem 0xfe640000-0xfe65ffff]
[    0.000000] GIC: enabling workaround for ITS: Rockchip erratum RK3588001
[    0.000000] GIC: enabling workaround for ITS: non-coherent attribute
[    0.000000] ITS@0x00000000fe640000: allocated 8192 Devices @3fc580000 (indirect, esz 8, psz 64K, shr 0)
[    0.000000] ITS@0x00000000fe640000: allocated 32768 Interrupt Collections @3fc590000 (flat, esz 2, psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] ITS [mem 0xfe660000-0xfe67ffff]
[    0.000000] GIC: enabling workaround for ITS: Rockchip erratum RK3588001
[    0.000000] GIC: enabling workaround for ITS: non-coherent attribute
[    0.000000] ITS@0x00000000fe660000: allocated 8192 Devices @3fc5b0000 (indirect, esz 8, psz 64K, shr 0)
[    0.000000] ITS@0x00000000fe660000: allocated 32768 Interrupt Collections @3fc5c0000 (flat, esz 2, psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GICv3: using LPI property table @0x00000003fc5d0000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000003fc5e0000
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@100[1] /cpus/cpu@200[2] /cpus/cpu@300[3] }
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@400[4] /cpus/cpu@500[5] /cpus/cpu@600[6] /cpus/cpu@700[7] }
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] arch_timer: cp15 timer running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.003888] Console: colour dummy device 80x25
[    0.004364] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.005338] pid_max: default: 32768 minimum: 301
[    0.009107] LSM: initializing lsm=lockdown,capability,apparmor
[    0.011617] AppArmor: AppArmor initialized
[    0.013350] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.014101] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.026304] rcu: Hierarchical SRCU implementation.
[    0.026759] rcu:     Max phase no-delay instances is 1000.
[    0.027613] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[    0.035018] EFI services will not be available.
[    0.035975] smp: Bringing up secondary CPUs ...
[    0.037225] Detected VIPT I-cache on CPU1
[    0.037531] GICv3: CPU1: found redistributor 100 region 0:0x00000000fe6a0000
[    0.037548] GICv3: CPU1: using allocated LPI pending table @0x00000003fc5f0000
[    0.037599] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[    0.038501] Detected VIPT I-cache on CPU2
[    0.038809] GICv3: CPU2: found redistributor 200 region 0:0x00000000fe6c0000
[    0.038825] GICv3: CPU2: using allocated LPI pending table @0x0000000100400000
[    0.038874] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[    0.039709] Detected VIPT I-cache on CPU3
[    0.040004] GICv3: CPU3: found redistributor 300 region 0:0x00000000fe6e0000
[    0.040021] GICv3: CPU3: using allocated LPI pending table @0x0000000100410000
[    0.040065] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[    0.040948] CPU features: detected: Spectre-v4
[    0.040955] CPU features: detected: Spectre-BHB
[    0.040961] CPU features: detected: Broken broadcast TLBI completion
[    0.040963] CPU features: detected: SSBS not fully self-synchronizing
[    0.040966] Detected PIPT I-cache on CPU4
[    0.041101] GICv3: CPU4: found redistributor 400 region 0:0x00000000fe700000
[    0.041110] GICv3: CPU4: using allocated LPI pending table @0x0000000100420000
[    0.041138] CPU4: Booted secondary processor 0x0000000400 [0x414fd0b0]
[    0.041938] Detected PIPT I-cache on CPU5
[    0.042082] GICv3: CPU5: found redistributor 500 region 0:0x00000000fe720000
[    0.042092] GICv3: CPU5: using allocated LPI pending table @0x0000000100430000
[    0.042121] CPU5: Booted secondary processor 0x0000000500 [0x414fd0b0]
[    0.042878] Detected PIPT I-cache on CPU6
[    0.043020] GICv3: CPU6: found redistributor 600 region 0:0x00000000fe740000
[    0.043029] GICv3: CPU6: using allocated LPI pending table @0x0000000100440000
[    0.043058] CPU6: Booted secondary processor 0x0000000600 [0x414fd0b0]
[    0.043910] Detected PIPT I-cache on CPU7
[    0.044052] GICv3: CPU7: found redistributor 700 region 0:0x00000000fe760000
[    0.044062] GICv3: CPU7: using allocated LPI pending table @0x0000000100450000
[    0.044091] CPU7: Booted secondary processor 0x0000000700 [0x414fd0b0]
[    0.044190] smp: Brought up 1 node, 8 CPUs
[    0.062675] SMP: Total of 8 processors activated.
[    0.063118] CPU: All CPU(s) started at EL2
[    0.063504] CPU features: detected: 32-bit EL0 Support
[    0.063986] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.064788] CPU features: detected: Common not Private translations
[    0.065374] CPU features: detected: CRC32 instructions
[    0.065860] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.066399] CPU features: detected: LSE atomic instructions
[    0.066920] CPU features: detected: Privileged Access Never
[    0.067441] CPU features: detected: PMUv3
[    0.067817] CPU features: detected: RAS Extension Support
[    0.068327] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.069077] alternatives: applying system-wide alternatives
[    0.074234] CPU features: detected: Hardware dirty bit management on CPU4-7
[    0.075442] Memory: 15785524K/16769024K available (18624K kernel code, 2658K rwdata, 7580K rodata, 2496K init, 866K bss, 583864K reserved, 393216K cma-reserved)
[    0.081808] devtmpfs: initialized
[    0.096674] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.097610] posixtimers hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.098347] futex hash table entries: 2048 (131072 bytes on 1 NUMA nodes, total 128 KiB, linear).
[    0.101185] 2G module region forced by RANDOMIZE_MODULE_REGION_FULL
[    0.101776] 0 pages in range for non-PLT usage
[    0.101778] 516176 pages in range for PLT usage
[    0.103169] pinctrl core: initialized pinctrl subsystem
[    0.104444] DMI not present or invalid.
[    0.107549] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.109083] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[    0.110128] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.111255] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.112029] audit: initializing netlink subsys (disabled)
[    0.112696] audit: type=2000 audit(0.110:1): state=initialized audit_enabled=0 res=1
[    0.114572] thermal_sys: Re
                              [    0.134038] /vop@fdd90000: Fixed dependency cycle(s) with /hdmi@fde80000
[    0.134712] /hdmi@fde80000: Fixed dependency cycle(s) with /vop@fdd90000
[    0.138739] /pcie@fe190000: Fixed dependency cycle(s) with /pcie@fe190000/legacy-interrupt-controller
[    0.141677] /i2c@feac0000/usb-typec@22/connector: Fixed dependency cycle(s) with /usb@fc000000
[    0.144674] /i2c@fec90000/audio-codec@11: Fixed dependency cycle(s) with /i2s@fe470000
[    0.146131] /i2c@feac0000/usb-typec@22/connector: Fixed dependency cycle(s) with /phy@fed80000
[    0.146969] /usb@fc000000: Fixed dependency cycle(s) with /phy@fed80000
[    0.147612] /phy@fed80000: Fixed dependency cycle(s) with /i2c@feac0000/usb-typec@22/connector
[    0.156540] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    0.158006] rockchip-gpio fd8a0000.gpio: probed /pinctrl/gpio@fd8a0000
[    0.158881] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    0.159898] rockchip-gpio fec20000.gpio: probed /pinctrl/gpio@fec20000
[    0.160677] gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    0.161659] rockchip-gpio fec30000.gpio: probed /pinctrl/gpio@fec30000
[    0.162480] gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    0.163467] rockchip-gpio fec40000.gpio: probed /pinctrl/gpio@fec40000
[    0.164290] gpio gpiochip4: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    0.165278] rockchip-gpio fec50000.gpio: probed /pinctrl/gpio@fec50000
[    0.168031] /vop@fdd90000: Fixed dependency cycle(s) with /hdmi@fdea0000
[    0.168691] /hdmi@fdea0000: Fixed dependency cycle(s) with /vop@fdd90000
[    0.170243] /pcie@fe150000: Fixed dependency cycle(s) with /pcie@fe150000/legacy-interrupt-controller
[    0.171557] /pcie@fe170000: Fixed dependency cycle(s) with /pcie@fe170000/legacy-interrupt-controller
[    0.173207] /hdmi@fde80000: Fixed dependency cycle(s) with /hdmi0-con
[    0.173839] /hdmi0-con: Fixed dependency cycle(s) with /hdmi@fde80000
[    0.174634] /hdmi@fdea0000: Fixed dependency cycle(s) with /hdmi1-con
[    0.175270] /hdmi1-con: Fixed dependency cycle(s) with /hdmi@fdea0000
[    0.179013] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.179651] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[    0.180238] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[    0.180871] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[    0.181456] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.182089] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[    0.182673] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[    0.183306] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[    0.186690] ACPI: Interpreter disabled.
[    0.187798] iommu: Default domain type: Translated
[    0.188247] iommu: DMA domain TLB invalidation policy: strict mode
[    0.189475] SCSI subsystem initialized
[    0.190092] usbcore: registered new interface driver usbfs
[    0.190619] usbcore: registered new interface driver hub
[    0.191133] usbcore: registered new device driver usb
[    0.191746] mc: Linux media interface: v0.10
[    0.192159] videodev: Linux video capture interface: v2.00
[    0.192691] pps_core: LinuxPPS API ver. 1 registered
[    0.193155] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    0.194010] PTP clock support registered
[    0.194543] EDAC MC: Ver: 3.0.0
[    0.195027] scmi_core: SCMI protocol bus registered
[    0.195748] FPGA manager framework
[    0.196616] NetLabel: Initializing
[    0.196936] NetLabel:  domain hash size = 128
[    0.197343] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.197902] NetLabel:  unlabeled traffic allowed by default
[    0.198533] vgaarb: loaded
[    0.199109] clocksource: Switched to clocksource arch_sys_counter
[    0.201189] VFS: Disk quotas dquot_6.6.0
[    0.2016
           [    0.222748] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.223754] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.224598] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.226544] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.229126] TCP: Hash tables configured (established 131072 bind 65536)
[    0.229985] MPTCP token hash table entries: 16384 (order: 7, 393216 bytes, linear)
[    0.230941] UDP hash table entries: 8192 (order: 7, 524288 bytes, linear)
[    0.232223] UDP-Lite hash table entries: 8192 (order: 7, 524288 bytes, linear)
[    0.233658] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.234644] RPC: Registered named UNIX socket transport module.
[    0.235199] RPC: Registered udp transport module.
[    0.235638] RPC: Registered tcp transport module.
[    0.236077] RPC: Registered tcp-with-tls transport module.
[    0.236589] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.237192] NET: Registered PF_XDP protocol family
[    0.237647] PCI: CLS 0 bytes, default 64
[    0.240673] kvm [1]: nv: 568 coarse grained trap handlers
[    0.241452] kvm [1]: IPA Size Limit: 40 bits
[    0.241875] kvm [1]: GICv3: no GICV resource entry
[    0.242324] kvm [1]: disabling GICv2 emulation
[    0.242764] kvm [1]: GIC system register CPU interface enabled
[    0.243320] kvm [1]: vgic interrupt IRQ18
[    0.243720] kvm [1]: VHE mode initialized successfully
[    0.245412] Initialise system trusted keyrings
[    0.245875] Key type blacklist registered
[    0.246406] workingset: timestamp_bits=46 max_order=22 bucket_order=0
[    0.252333] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.255686] NFS: Registering the id_resolver key type
[    0.256181] Key type id_resolver registered
[    0.256572] Key type id_legacy registered
[    0.257021] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.257649] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    0.258382] fuse: init (API version 7.45)
[    0.262297] integrity: Platform Keyring initialized
[    0.262999] cryptd: max_cpu_qlen set to 1000
[    0.302854] Key type asymmetric registered
[    0.303239] Asymmetric key parser 'x509' registered
[    0.303879] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 241)
[    0.304732] io scheduler mq-deadline registered
[    0.305161] io scheduler kyber registered
[    0.305662] io scheduler bfq registered
[    0.317057] ledtrig-cpu: registered to indicate activity on CPUs
[    0.322733] dma-pl330 fea10000.dma-controller: Loaded driver for PL330 DMAC-241330
[    0.323444] dma-pl330 fea10000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    0.325184] dma-pl330 fea30000.dma-controller: Loaded driver for PL330 DMAC-241330
[    0.325892] dma-pl330 fea30000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    0.327628] dma-pl330 fed10000.dma-controller: Loaded driver for PL330 DMAC-241330
[    0.328337] dma-pl330 fed10000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    0.335353] Serial: 8250/16550 driver, 8 ports, IRQ sharing enabled
[    0.338242] feb50000.serial: ttyS2 at MMIO 0xfeb50000 (irq = 41, base_baud = 1500000) is a 16550A
[    0.339871] feb90000.serial: ttyS6 at MMIO 0xfeb90000 (irq = 42, base_baud = 1500000) is a 16550A
[    0.341592] Serial: AMBA driver
[    0.343270] arm-smmu-v3 fc900000.iommu: ias 48-bit, oas 48-bit (features 0x001c1ebf)
[    0.344661] arm-smmu-v3 fc900000.iommu: allocated 65536 entries for cmdq
[    0.345725] arm-smmu-v3 fc900000.iommu: allocated 32768 entries for evtq
[    0.346976] arm-smmu-v3 fc900000.iommu: allocated 65536 entries for priq
[    0.348090] arm-smmu-v3 fc900000.iommu: msi_domain absent - falling back to wired irqs
[    0.349953] rockchip-pm-domain fd8d8000.power-management:power-controller: Failed to enable supply: -517
[    0.350883] rockchip-pm-domain fd8d8000.power-management:power-controller: Failed to enable supply: -517
[    0.351802] rockchip-pm-domain fd8d8000.power-management:power-controller: Failed to enable supply: -517
[    0.353101] platform fdb50000.video-codec: Adding to iommu group 0
[    0.354552] platform fdba0000.video-codec: Adding to iommu group 1
[    0.355973] platform fdba4000.video-codec: Adding to iommu group 2
[    0.357365] platform fdba8000.video-codec: Adding to iommu group 3
[    0.358780] platform fdbac000.video-codec: Adding to iommu group 4
[    0.360123] platform fdd90000.vop: Adding to iommu group 5
[    0.366546] loop: module loaded
[    0.367099] zram: Added device: zram0
[    0.367664] zram: Added device: zram1
[    0.368223] zram: Added device: zram2
[    0.372253] /spi@feb20000/pmic@0: Fixed dependency cycle(s) with /spi@feb20000/pmic@0/regulators/dcdc-reg7
[    0.373191] /spi@feb20000/pmic@0: Fixed dependency cycle(s) with /spi@feb20000/pmic@0/dvs3-null-pins
[    0.374049] /spi@feb20000/pmic@0: Fixed dependency cycle(s) with /spi@feb20000/pmic@0/dvs2-null-pins
[    0.374906] /spi@feb20000/pmic@0: Fixed dependency cycle(s) with /spi@feb20000/pmic@0/dvs1-null-pins
[    0.377209] tun: Universal TUN/TAP device driver, 1.6
[    0.378431] thunder_xcv, ver 1.0
[    0.378751] thunder_bgx, ver 1.0
[    0.379078] nicpf, ver 1.0
[    0.381232] VFIO - User Level meta-driver version: 0.3
[    0.384846] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    0.385370] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[    0.386166] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000808002000010
[    0.386959] ehci-platform fc800000.usb: EHCI Host Controller
[    0.386977] ohci-platform fc840000.usb: Generic Platform OHCI controller
[    0.387003] ohci-platform fc840000.usb: new USB bus registered, assigned bus number 2
[    0.387061] xhci-hcd xhci-hcd.0.auto: irq 53, io mem 0xfcd00000
[    0.387166] ohci-platform fc840000.usb: irq 55, io mem 0xfc840000
[    0.387604] ehci-platform fc800000.usb: new USB bus registered, assigned bus number 3
[    0.388281] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    0.389054] ehci-platform fc800000.usb: irq 54, io mem 0xfc800000
[    0.389490] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 4
[    0.389497] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[    0.389589] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18
[    0.393960] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.394636] usb usb1: Product: xHCI Host Controller
[    0.395093] usb usb1: Manufacturer: Linux 6.18.36-haos xhci-hcd
[    0.395646] usb usb1: SerialNumber: xhci-hcd.0.auto
[    0.396440] hub 1-0:1.0: USB hub found
[    0.396805] hub 1-0:1.0: 1 port detected
[    0.397336] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.398135] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.18
[    0.398908] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.399596] usb usb4: Product: xHCI Host Controller
[    0.400053] usb usb4: Manufacturer: Linux 6.18.36-haos xhci-hcd
[    0.400606] usb usb4: SerialNumber: xhci-hcd.0.auto
[    0.401321] hub 4-0:1.0: USB hub found
[    0.401683] hub 4-0:1.0: 1 port detected
[    0.402398] usbcore: registered new interface driver usb-storage
[    0.402999] usbcore: registered new interface driver usbserial_generic
[    0.403623] usbserial: USB Serial support registered for generic
[    0.405732] mousedev: PS/2 mouse device common for all mice
[    0.407014] i2c_dev: i2c /dev entries driver
[    0.408774] rockchip-pm-domain fd8d8000.power-management:power-controller: Failed to create device link (0x180) with supplier 1-0042 for /power-management@fd8d8000/power-cont                                   roller/power-domain@8
[    0.409145] ehci-platform fc800000.usb: USB 2.0 started, EHCI 1.00
[    0.409632] fan53555-regulator 0-0042: FAN53555 Option[10] Rev[1] Detected!
[    0.410101] fan53555-regulator 0-0043: FAN53555 Option[10] Rev[1] Detected!
[    0.411074] /i2c@feac0000/usb-typec@22/connector: Fixed dependency cycle(s) with /phy@fed80000
[    0.411613] fan53555-regulator 1-0042: FAN53555 Option[10] Rev[1] Detected!
[    0.411893] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18
[    0.411909] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.411919] usb usb3: Product: EHCI Host Controller
[    0.411926] usb usb3: Manufacturer: Linux 6.18.36-haos ehci_hcd
[    0.411934] usb usb3: SerialNumber: fc800000.usb
[    0.412293] /i2c@feac0000/usb-typec@22/connector: Fixed dependency cycle(s) with /usb@fc000000
[    0.417786] rockchip-pm-domain fd8d8000.power-management:power-controller: Failed to create device link (0x180) with supplier 1-0042 for /power-management@fd8d8000/power-cont                                   roller/power-domain@8
[    0.417800] hub 3-0:1.0: USB hub found
[    0.419852] hub 3-0:1.0: 1 port detected
[    0.443386] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18
[    0.444175] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.444870] usb usb2: Product: Generic Platform OHCI controller
[    0.445431] usb usb2: Manufacturer: Linux 6.18.36-haos ohci_hcd
[    0.446001] usb usb2: SerialNumber: fc840000.usb
[    [email protected]
[    0.459950] sdhci: Secure Digital Host Controller Interface driver
[    0.460529] sdhci: Copyright(c)
                                   [    0.462251] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.463705] No iBFT detected.
[    0.464641] arm-scmi arm-scmi.2.auto: Using scmi_smc_transport
[    0.465189] arm-scmi arm-scmi.2.auto: SCMI max-rx-timeout: 30ms / max-msg-size: 104bytes / max-msg: 20
[    0.466127] scmi_protocol scmi_dev.1: Enabled polling mode TX channel - prot_id:16
[    0.466941] arm-scmi arm-scmi.2.auto: SCMI Notifications - Core Enabled.
[    0.467602] arm-scmi arm-scmi.2.auto: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
[    0.468401] arm-scmi arm-scmi.2.auto: Enabling SCMI Quirk [quirk_clock_rates_triplet_out_of_spec]
[    0.470645] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[    0.471508] hid: raw HID events driver (C) Jiri Kosina
[    0.472377] usbcore: registered new interface driver usbhid
[    0.472904] usbhid: USB HID core driver
[    0.477406] hw perfevents: enabled with armv8_cortex_a55 PMU driver, 7 (0,8000003f) counters available
[    0.479379] hw perfevents: enabled with armv8_cortex_a76 PMU driver, 7 (0,8000003f) counters available
[    0.483716] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP)
[    0.484290] IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
[    0.485057] IPVS: ipvs loaded.
[    0.485346] IPVS: [rr] scheduler registered.
[    0.486342] NET: Registered PF_INET6 protocol family
[    0.488330] Segment Routing with IPv6
[    0.488703] In-situ OAM (IOAM) with IPv6
[    0.489152] NET: Registered PF_PACKET protocol family
[    0.489661] Bridge firewalling registered
[    0.490504] Key type dns_resolver registered
[    0.498775] registered taskstats version 1
[    0.499323] Loading compiled-in X.509 certificates
[    0.503716] Loaded X.509 cert 'Build time autogenerated kernel key: c0e22f79c3cd705fd86bc9b754f113194afe6a76'
[    0.513867] zswap: loaded using pool lz4
[    0.514513] Key type .fscrypt registered
[    0.514882] Key type fscrypt-provisioning registered
[    0.515583] Key type encrypted registered
[    0.515959] AppArmor: AppArmor sha256 policy hashing enabled
[    0.551096] rockchip-dw-pcie a40000000.pcie: host bridge /pcie@fe150000 ranges:
[    0.551825] rockchip-dw-pcie a40000000.pcie:       IO 0x00f0100000..0x00f01fffff -> 0x00f0100000
[    0.552663] rockchip-dw-pcie a40000000.pcie:      MEM 0x00f0200000..0x00f0ffffff -> 0x00f0200000
[    0.553493] rockchip-dw-pcie a40000000.pcie:      MEM 0x0900000000..0x093fffffff -> 0x0900000000
[    0.562103] rockchip-dw-pcie a40000000.pcie: iATU: unroll T, 8 ob, 8 ib, align 64K, limit 8G
[    0.699400] usb 3-1: new high-speed USB device number 2 using ehci-platform
[    0.871203] usb 3-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[    0.871979] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    0.872647] usb 3-1: Product: USB 2.0 Hub
[    0.873616] hub 3-1:1.0: USB hub found
[    0.874178] hub 3-1:1.0: 4 ports detected
[    0.889398] rockchip-dw-pcie a40000000.pcie: PCIe Gen.3 x4 link up
[    0.890607] rockchip-dw-pcie a40000000.pcie: PCI host bridge to bus 0000:00
[    0.891271] pci_bus 0000:00: root bus resource [bus 00-0f]
[    0.891794] pci_bus 0000:00: root bus resource [io  0x0000-0xfffff] (bus address [0xf0100000-0xf01fffff])
[    0.892690] pci_bus 0000:00: root bus resource [mem 0xf0200000-0xf0ffffff]
[    0.893337] pci_bus 0000:00: root bus resource [mem 0x900000000-0x93fffffff]
[    0.894035] pci 0000:00:00.0: [1d87:3588] type 01 class 0x060400 PCIe Root Port
[    0.894741] pci 0000:00:00.0: ROM [mem 0x00000000-0x0000ffff pref]
[    0.895324] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    0.895819] pci 0000:00:00.0:   bridge window [io  0x0000-0x0fff]
[    0.896395] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff]
[    0.897039] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[    0.897820] pci 0000:00:00.0: supports D1 D2
[    0.898225] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    0.899840] pci 0000:00:00.0: Adding to iommu group 6
[    0.911645] pci_bus 0000:01: busn_res: can not insert [bus 01-ff] under [bus 00-0f] (conflicts with (null) [bus 00-0f])
[    0.912741] pci 0000:01:00.0: [c0a9:540a] type 00 class 0x010802 PCIe Endpoint
[    0.913580] pci 0000:01:00.0: BAR 0 [mem 0x00000000-0x00003fff 64bit]
[    0.915501] pci 0000:01:00.0: Adding to iommu group 6
[    0.929341] pci 0000:01:00.0: ASPM: default states L1
[    0.929881] pci 0000:00:00.0: bridge window [mem 0xf0200000-0xf02fffff]: assigned
[    0.930589] pci 0000:00:00.0: ROM [mem 0xf0300000-0xf030ffff pref]: assigned
[    0.931261] pci 0000:01:00.0: BAR 0 [mem 0xf0200000-0xf0203fff 64bit]: assigned
[    0.931981] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    0.932477] pci 0000:00:00.0:   bridge window [mem 0xf0200000-0xf02fffff]
[    0.933121] pci_bus 0000:00: resource 4 [io  0x0000-0xfffff]
[    0.933655] pci_bus 0000:00: resource 5 [mem 0xf0200000-0xf0ffffff]
[    0.934245] pci_bus 0000:00: resource 6 [mem 0x900000000-0x93fffffff]
[    0.934852] pci_bus 0000:01: resource 1 [mem 0xf0200000-0xf02fffff]
[    0.939338] pcieport 0000:00:00.0: PME: Signaling with IRQ 76
[    0.940701] pcieport 0000:00:00.0: AER: enabled with IRQ 77
[    0.942328] nvme nvme0: pci function 0000:01:00.0
[    0.942777] rockchip-dw-pcie a40800000.pcie: host bridge /pcie@fe170000 ranges:
[    0.942787] nvme 0000:01:00.0: enabling device (0000 -> 0002)
[    0.944028] rockchip-dw-pcie a40800000.pcie:       IO 0x00f2100000..0x00f21fffff -> 0x00f2100000
[    0.944866] rockchip-dw-pcie a40800000.pcie:      MEM 0x00f2200000..0x00f2ffffff -> 0x00f2200000
[    0.945697] rockchip-dw-pcie a40800000.pcie:      MEM 0x0980000000..0x09bfffffff -> 0x0980000000
[    0.946757] rockchip-dw-pcie a40800000.pcie: iATU: unroll T, 8 ob, 8 ib, align 64K, limit 8G