[DeFooocus] Preparing ...
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 738.5/738.5 kB 22.0 MB/s eta 0:00:00
Installing build dependencies ... done
Getting requirements to build wheel ... done
Installing backend dependencies ... done
Preparing metadata (pyproject.toml) ... done
error: subprocess-exited-with-error
× Building wheel for pygit2 (pyproject.toml) did not run successfully.
│ exit code: 1
╰─> See above for output.
note: This error originates from a subprocess, and is likely not a problem with pip.
Building wheel for pygit2 (pyproject.toml) ... error
ERROR: Failed building wheel for pygit2
ERROR: ERROR: Failed to build installable wheels for some pyproject.toml based projects (pygit2)
/content
Cloning into 'DeFooocus'...
remote: Enumerating objects: 7032, done.
remote: Total 7032 (delta 0), reused 0 (delta 0), pack-reused 7032 (from 1)
Receiving objects: 100% (7032/7032), 47.35 MiB | 27.50 MiB/s, done.
Resolving deltas: 100% (3825/3825), done.
/content/DeFooocus
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 43.6/43.6 kB 2.5 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 60.8/60.8 kB 4.7 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 57.6/57.6 kB 5.5 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 47.5/47.5 kB 5.8 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 61.0/61.0 kB 7.1 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 68.5/68.5 kB 4.0 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 82.3/82.3 kB 10.4 MB/s eta 0:00:00
Preparing metadata (setup.py) ... done
Preparing metadata (setup.py) ... done
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 46.8/46.8 kB 5.4 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 61.2/61.2 kB 6.9 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 43.2/43.2 kB 5.1 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 9.3/9.3 MB 108.5 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.2/1.2 MB 92.1 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 314.1/314.1 kB 35.7 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 725.0/725.0 kB 62.6 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 4.5/4.5 MB 143.8 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 40.8/40.8 MB 21.7 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 78.3/78.3 kB 9.9 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 290.5/290.5 kB 33.0 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 812.3/812.3 kB 72.6 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 20.1/20.1 MB 98.7 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 5.1/5.1 MB 144.6 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 56.0/56.0 MB 11.1 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 75.6/75.6 kB 5.9 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 6.8/6.8 MB 108.7 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.3/2.3 MB 88.3 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 18.0/18.0 MB 77.4 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3.6/3.6 MB 94.3 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 54.0/54.0 kB 6.2 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 54.7/54.7 kB 5.3 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 298.2/298.2 kB 29.4 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 566.4/566.4 kB 47.3 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 82.2/82.2 kB 6.2 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 983.4/983.4 kB 50.0 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 118.1/118.1 kB 11.9 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 46.0/46.0 kB 4.9 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 63.0/63.0 MB 11.8 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 50.0/50.0 MB 22.0 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 54.9/54.9 kB 6.1 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 256.2/256.2 kB 29.8 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 120.0/120.0 kB 15.8 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 86.8/86.8 kB 11.2 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 150.3/150.3 kB 18.1 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 56.8/56.8 kB 6.9 MB/s eta 0:00:00
Building wheel for groundingdino-py (setup.py) ... done
Building wheel for PyExecJS (setup.py) ... done
ERROR: pip's dependency resolver does not currently take into account all the packages that are installed. This behaviour is the source of the following dependency conflicts.
shap 0.51.0 requires numpy>=2, but you have numpy 1.26.4 which is incompatible.
firebase-admin 6.9.0 requires httpx[http2]==0.28.1, but you have httpx 0.27.0 which is incompatible.
access 1.1.10.post3 requires scipy>=1.14.1, but you have scipy 1.14.0 which is incompatible.
google-cloud-bigquery 3.40.1 requires packaging>=24.2.0, but you have packaging 24.1 which is incompatible.
datasets 4.0.0 requires dill<0.3.9,>=0.3.0, but you have dill 0.4.1 which is incompatible.
datasets 4.0.0 requires multiprocess<0.70.17, but you have multiprocess 0.70.19 which is incompatible.
rasterio 1.5.0 requires numpy>=2, but you have numpy 1.26.4 which is incompatible.
tobler 0.13.0 requires numpy>=2.0, but you have numpy 1.26.4 which is incompatible.
tobler 0.13.0 requires tqdm>=4.67, but you have tqdm 4.66.4 which is incompatible.
pytensor 2.38.2 requires numpy>=2.0, but you have numpy 1.26.4 which is incompatible.
dataproc-spark-connect 1.0.2 requires tqdm>=4.67, but you have tqdm 4.66.4 which is incompatible.
dataproc-spark-connect 1.0.2 requires websockets>=14.0, but you have websockets 11.0.3 which is incompatible.
opencv-contrib-python 4.13.0.92 requires numpy>=2; python_version >= "3.9", but you have numpy 1.26.4 which is incompatible.
jax 0.7.2 requires numpy>=2.0, but you have numpy 1.26.4 which is incompatible.
xarray-einstats 0.10.0 requires numpy>=2.0, but you have numpy 1.26.4 which is incompatible.
db-dtypes 1.5.0 requires packaging>=24.2.0, but you have packaging 24.1 which is incompatible.
yfinance 0.2.66 requires websockets>=13.0, but you have websockets 11.0.3 which is incompatible.
cupy-cuda12x 14.0.1 requires numpy<2.6,>=2.0, but you have numpy 1.26.4 which is incompatible.
mcp 1.26.0 requires httpx>=0.27.1, but you have httpx 0.27.0 which is incompatible.
google-adk 1.27.1 requires PyYAML<7.0.0,>=6.0.2, but you have pyyaml 6.0.1 which is incompatible.
google-adk 1.27.1 requires websockets<16.0.0,>=15.0.1, but you have websockets 11.0.3 which is incompatible.
google-genai 1.67.0 requires httpx<1.0.0,>=0.28.1, but you have httpx 0.27.0 which is incompatible.
google-genai 1.67.0 requires websockets<17.0,>=13.0.0, but you have websockets 11.0.3 which is incompatible.
jaxlib 0.7.2 requires numpy>=2.0, but you have numpy 1.26.4 which is incompatible.
[DeFooocus] Starting ...
Already up-to-date
Update succeeded.
[System ARGV] ['entry_with_update.py', '--share', '--attention-split', '--always-high-vram', '--disable-offload-from-vram', '--all-in-fp16', '--theme', 'dark']
/content/DeFooocus/build_launcher.py:9: SyntaxWarning: invalid escape sequence '\p'
.\python_embeded\python.exe -s DeFooocus\entry_with_update.py {cmds} %*
Python 3.12.13 (main, Mar 4 2026, 09:23:07) [GCC 11.4.0]
Fooocus version: 0.2
Downloading: "https://huggingface.co/lllyasviel/misc/resolve/main/xlvaeapp.pth" to /content/DeFooocus/models/vae_approx/xlvaeapp.pth
100% 209k/209k [00:00<00:00, 9.91MB/s]
Downloading: "https://huggingface.co/lllyasviel/misc/resolve/main/vaeapp_sd15.pt" to /content/DeFooocus/models/vae_approx/vaeapp_sd15.pth
100% 209k/209k [00:00<00:00, 9.64MB/s]
Downloading: "https://huggingface.co/lllyasviel/misc/resolve/main/xl-to-v1_interposer-v3.1.safetensors" to /content/DeFooocus/models/vae_approx/xl-to-v1_interposer-v3.1.safetensors
100% 6.25M/6.25M [00:00<00:00, 124MB/s]
Downloading: "https://huggingface.co/lllyasviel/misc/resolve/main/fooocus_expansion.bin" to /content/DeFooocus/models/prompt_expansion/fooocus_expansion/pytorch_model.bin
100% 335M/335M [00:00<00:00, 467MB/s]
Downloading: "https://huggingface.co/fluently/Fluently-XL-v4/resolve/main/FluentlyXL-v4.safetensors" to /content/DeFooocus/models/checkpoints/FluentlyXL-v4.safetensors
100% 6.62G/6.62G [00:48<00:00, 147MB/s]
Downloading: "https://huggingface.co/stabilityai/stable-diffusion-xl-base-1.0/resolve/main/sd_xl_offset_example-lora_1.0.safetensors" to /content/DeFooocus/models/loras/sd_xl_offset_example-lora_1.0.safetensors
100% 47.3M/47.3M [00:00<00:00, 327MB/s]
Total VRAM 14913 MB, total RAM 12976 MB
Forcing FP16.
Set vram state to: HIGH_VRAM
Device: cuda:0 Tesla T4 : native
VAE dtype: torch.float32
Using split optimization for cross attention
/content/DeFooocus/ldm_patched/unipc/uni_pc.py:56: SyntaxWarning: invalid escape sequence '\h'
The alphas_cumprod is the \hat{alpha_n} arrays in the notations of DDPM. Specifically, DDPMs assume that
Refiner unloaded.
model_type EPS
UNet ADM Dimension 2816
Using split attention in VAE
Working with z of shape (1, 4, 32, 32) = 4096 dimensions.
Using split attention in VAE
Traceback (most recent call last):
File "/usr/local/lib/python3.12/dist-packages/cupy/init.py", line 18, in
from cupy import _core # NOQA
^^^^^^^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.12/dist-packages/cupy/_core/init.py", line 5, in
from cupy._core import core # NOQA
^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "cupy/_core/core.pyx", line 1, in init cupy._core.core
File "/usr/local/lib/python3.12/dist-packages/cupy/cuda/init.py", line 13, in
from cupy.cuda import compiler # NOQA
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.12/dist-packages/cupy/cuda/compiler.py", line 16, in
from cupy.cuda import function
File "cupy/cuda/function.pyx", line 1, in init cupy.cuda.function
File "cupy/_core/_scalar.pyx", line 1, in init cupy._core._scalar
ImportError: numpy.core.multiarray failed to import (auto-generated because you didn't call 'numpy.import_array()' after cimporting numpy; use 'numpy._import_array' to disable if you are certain you don't need it).
The above exception was the direct cause of the following exception:
Traceback (most recent call last):
File "/content/DeFooocus/entry_with_update.py", line 46, in
from launch import *
File "/content/DeFooocus/launch.py", line 128, in
from webui import *
File "/content/DeFooocus/webui.py", line 16, in
from modules.rembg import rembg_run
File "/content/DeFooocus/modules/rembg.py", line 1, in
from rembg import remove
File "/usr/local/lib/python3.12/dist-packages/rembg/init.py", line 5, in
from .bg import remove
File "/usr/local/lib/python3.12/dist-packages/rembg/bg.py", line 17, in
from pymatting.alpha.estimate_alpha_cf import estimate_alpha_cf
File "/usr/local/lib/python3.12/dist-packages/pymatting/init.py", line 5, in
from pymatting.foreground import *
File "/usr/local/lib/python3.12/dist-packages/pymatting/foreground/init.py", line 7, in
from pymatting.foreground.estimate_foreground_ml_cupy import estimate_foreground_ml_cupy
File "/usr/local/lib/python3.12/dist-packages/pymatting/foreground/estimate_foreground_ml_cupy.py", line 2, in
import cupy as cp
File "/usr/local/lib/python3.12/dist-packages/cupy/init.py", line 20, in
raise ImportError(f'''
ImportError:
Failed to import CuPy.
If you installed CuPy via wheels (cupy-cudaXXX or cupy-rocm-X-X), make sure that the package matches with the version of CUDA or ROCm installed.
On Linux, you may need to set LD_LIBRARY_PATH environment variable depending on how you installed CUDA/ROCm.
On Windows, try setting CUDA_PATH environment variable.
Check the Installation Guide for details:
https://docs.cupy.dev/en/latest/install.html
Original error:
ImportError: numpy.core.multiarray failed to import (auto-generated because you didn't call 'numpy.import_array()' after cimporting numpy; use 'numpy._import_array' to disable if you are certain you don't need it).
terminate called without an active exception
[DeFooocus] Preparing ...
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 738.5/738.5 kB 22.0 MB/s eta 0:00:00
Installing build dependencies ... done
Getting requirements to build wheel ... done
Installing backend dependencies ... done
Preparing metadata (pyproject.toml) ... done
error: subprocess-exited-with-error
× Building wheel for pygit2 (pyproject.toml) did not run successfully.
│ exit code: 1
╰─> See above for output.
note: This error originates from a subprocess, and is likely not a problem with pip.
Building wheel for pygit2 (pyproject.toml) ... error
ERROR: Failed building wheel for pygit2
ERROR: ERROR: Failed to build installable wheels for some pyproject.toml based projects (pygit2)
/content
Cloning into 'DeFooocus'...
remote: Enumerating objects: 7032, done.
remote: Total 7032 (delta 0), reused 0 (delta 0), pack-reused 7032 (from 1)
Receiving objects: 100% (7032/7032), 47.35 MiB | 27.50 MiB/s, done.
Resolving deltas: 100% (3825/3825), done.
/content/DeFooocus
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 43.6/43.6 kB 2.5 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 60.8/60.8 kB 4.7 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 57.6/57.6 kB 5.5 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 47.5/47.5 kB 5.8 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 61.0/61.0 kB 7.1 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 68.5/68.5 kB 4.0 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 82.3/82.3 kB 10.4 MB/s eta 0:00:00
Preparing metadata (setup.py) ... done
Preparing metadata (setup.py) ... done
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 46.8/46.8 kB 5.4 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 61.2/61.2 kB 6.9 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 43.2/43.2 kB 5.1 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 9.3/9.3 MB 108.5 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.2/1.2 MB 92.1 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 314.1/314.1 kB 35.7 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 725.0/725.0 kB 62.6 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 4.5/4.5 MB 143.8 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 40.8/40.8 MB 21.7 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 78.3/78.3 kB 9.9 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 290.5/290.5 kB 33.0 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 812.3/812.3 kB 72.6 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 20.1/20.1 MB 98.7 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 5.1/5.1 MB 144.6 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 56.0/56.0 MB 11.1 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 75.6/75.6 kB 5.9 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 6.8/6.8 MB 108.7 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.3/2.3 MB 88.3 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 18.0/18.0 MB 77.4 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3.6/3.6 MB 94.3 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 54.0/54.0 kB 6.2 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 54.7/54.7 kB 5.3 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 298.2/298.2 kB 29.4 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 566.4/566.4 kB 47.3 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 82.2/82.2 kB 6.2 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 983.4/983.4 kB 50.0 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 118.1/118.1 kB 11.9 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 46.0/46.0 kB 4.9 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 63.0/63.0 MB 11.8 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 50.0/50.0 MB 22.0 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 54.9/54.9 kB 6.1 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 256.2/256.2 kB 29.8 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 120.0/120.0 kB 15.8 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 86.8/86.8 kB 11.2 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 150.3/150.3 kB 18.1 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 56.8/56.8 kB 6.9 MB/s eta 0:00:00
Building wheel for groundingdino-py (setup.py) ... done
Building wheel for PyExecJS (setup.py) ... done
ERROR: pip's dependency resolver does not currently take into account all the packages that are installed. This behaviour is the source of the following dependency conflicts.
shap 0.51.0 requires numpy>=2, but you have numpy 1.26.4 which is incompatible.
firebase-admin 6.9.0 requires httpx[http2]==0.28.1, but you have httpx 0.27.0 which is incompatible.
access 1.1.10.post3 requires scipy>=1.14.1, but you have scipy 1.14.0 which is incompatible.
google-cloud-bigquery 3.40.1 requires packaging>=24.2.0, but you have packaging 24.1 which is incompatible.
datasets 4.0.0 requires dill<0.3.9,>=0.3.0, but you have dill 0.4.1 which is incompatible.
datasets 4.0.0 requires multiprocess<0.70.17, but you have multiprocess 0.70.19 which is incompatible.
rasterio 1.5.0 requires numpy>=2, but you have numpy 1.26.4 which is incompatible.
tobler 0.13.0 requires numpy>=2.0, but you have numpy 1.26.4 which is incompatible.
tobler 0.13.0 requires tqdm>=4.67, but you have tqdm 4.66.4 which is incompatible.
pytensor 2.38.2 requires numpy>=2.0, but you have numpy 1.26.4 which is incompatible.
dataproc-spark-connect 1.0.2 requires tqdm>=4.67, but you have tqdm 4.66.4 which is incompatible.
dataproc-spark-connect 1.0.2 requires websockets>=14.0, but you have websockets 11.0.3 which is incompatible.
opencv-contrib-python 4.13.0.92 requires numpy>=2; python_version >= "3.9", but you have numpy 1.26.4 which is incompatible.
jax 0.7.2 requires numpy>=2.0, but you have numpy 1.26.4 which is incompatible.
xarray-einstats 0.10.0 requires numpy>=2.0, but you have numpy 1.26.4 which is incompatible.
db-dtypes 1.5.0 requires packaging>=24.2.0, but you have packaging 24.1 which is incompatible.
yfinance 0.2.66 requires websockets>=13.0, but you have websockets 11.0.3 which is incompatible.
cupy-cuda12x 14.0.1 requires numpy<2.6,>=2.0, but you have numpy 1.26.4 which is incompatible.
mcp 1.26.0 requires httpx>=0.27.1, but you have httpx 0.27.0 which is incompatible.
google-adk 1.27.1 requires PyYAML<7.0.0,>=6.0.2, but you have pyyaml 6.0.1 which is incompatible.
google-adk 1.27.1 requires websockets<16.0.0,>=15.0.1, but you have websockets 11.0.3 which is incompatible.
google-genai 1.67.0 requires httpx<1.0.0,>=0.28.1, but you have httpx 0.27.0 which is incompatible.
google-genai 1.67.0 requires websockets<17.0,>=13.0.0, but you have websockets 11.0.3 which is incompatible.
jaxlib 0.7.2 requires numpy>=2.0, but you have numpy 1.26.4 which is incompatible.
[DeFooocus] Starting ...
Already up-to-date
Update succeeded.
[System ARGV] ['entry_with_update.py', '--share', '--attention-split', '--always-high-vram', '--disable-offload-from-vram', '--all-in-fp16', '--theme', 'dark']
/content/DeFooocus/build_launcher.py:9: SyntaxWarning: invalid escape sequence '\p'
.\python_embeded\python.exe -s DeFooocus\entry_with_update.py {cmds} %*
Python 3.12.13 (main, Mar 4 2026, 09:23:07) [GCC 11.4.0]
Fooocus version: 0.2
Downloading: "https://huggingface.co/lllyasviel/misc/resolve/main/xlvaeapp.pth" to /content/DeFooocus/models/vae_approx/xlvaeapp.pth
100% 209k/209k [00:00<00:00, 9.91MB/s]
Downloading: "https://huggingface.co/lllyasviel/misc/resolve/main/vaeapp_sd15.pt" to /content/DeFooocus/models/vae_approx/vaeapp_sd15.pth
100% 209k/209k [00:00<00:00, 9.64MB/s]
Downloading: "https://huggingface.co/lllyasviel/misc/resolve/main/xl-to-v1_interposer-v3.1.safetensors" to /content/DeFooocus/models/vae_approx/xl-to-v1_interposer-v3.1.safetensors
100% 6.25M/6.25M [00:00<00:00, 124MB/s]
Downloading: "https://huggingface.co/lllyasviel/misc/resolve/main/fooocus_expansion.bin" to /content/DeFooocus/models/prompt_expansion/fooocus_expansion/pytorch_model.bin
100% 335M/335M [00:00<00:00, 467MB/s]
Downloading: "https://huggingface.co/fluently/Fluently-XL-v4/resolve/main/FluentlyXL-v4.safetensors" to /content/DeFooocus/models/checkpoints/FluentlyXL-v4.safetensors
100% 6.62G/6.62G [00:48<00:00, 147MB/s]
Downloading: "https://huggingface.co/stabilityai/stable-diffusion-xl-base-1.0/resolve/main/sd_xl_offset_example-lora_1.0.safetensors" to /content/DeFooocus/models/loras/sd_xl_offset_example-lora_1.0.safetensors
100% 47.3M/47.3M [00:00<00:00, 327MB/s]
Total VRAM 14913 MB, total RAM 12976 MB
Forcing FP16.
Set vram state to: HIGH_VRAM
Device: cuda:0 Tesla T4 : native
VAE dtype: torch.float32
Using split optimization for cross attention
/content/DeFooocus/ldm_patched/unipc/uni_pc.py:56: SyntaxWarning: invalid escape sequence '\h'
The
alphas_cumprodis the \hat{alpha_n} arrays in the notations of DDPM. Specifically, DDPMs assume thatRefiner unloaded.
model_type EPS
UNet ADM Dimension 2816
Using split attention in VAE
Working with z of shape (1, 4, 32, 32) = 4096 dimensions.
Using split attention in VAE
Traceback (most recent call last):
File "/usr/local/lib/python3.12/dist-packages/cupy/init.py", line 18, in
from cupy import _core # NOQA
^^^^^^^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.12/dist-packages/cupy/_core/init.py", line 5, in
from cupy._core import core # NOQA
^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "cupy/_core/core.pyx", line 1, in init cupy._core.core
File "/usr/local/lib/python3.12/dist-packages/cupy/cuda/init.py", line 13, in
from cupy.cuda import compiler # NOQA
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.12/dist-packages/cupy/cuda/compiler.py", line 16, in
from cupy.cuda import function
File "cupy/cuda/function.pyx", line 1, in init cupy.cuda.function
File "cupy/_core/_scalar.pyx", line 1, in init cupy._core._scalar
ImportError: numpy.core.multiarray failed to import (auto-generated because you didn't call 'numpy.import_array()' after cimporting numpy; use 'numpy._import_array' to disable if you are certain you don't need it).
The above exception was the direct cause of the following exception:
Traceback (most recent call last):
File "/content/DeFooocus/entry_with_update.py", line 46, in
from launch import *
File "/content/DeFooocus/launch.py", line 128, in
from webui import *
File "/content/DeFooocus/webui.py", line 16, in
from modules.rembg import rembg_run
File "/content/DeFooocus/modules/rembg.py", line 1, in
from rembg import remove
File "/usr/local/lib/python3.12/dist-packages/rembg/init.py", line 5, in
from .bg import remove
File "/usr/local/lib/python3.12/dist-packages/rembg/bg.py", line 17, in
from pymatting.alpha.estimate_alpha_cf import estimate_alpha_cf
File "/usr/local/lib/python3.12/dist-packages/pymatting/init.py", line 5, in
from pymatting.foreground import *
File "/usr/local/lib/python3.12/dist-packages/pymatting/foreground/init.py", line 7, in
from pymatting.foreground.estimate_foreground_ml_cupy import estimate_foreground_ml_cupy
File "/usr/local/lib/python3.12/dist-packages/pymatting/foreground/estimate_foreground_ml_cupy.py", line 2, in
import cupy as cp
File "/usr/local/lib/python3.12/dist-packages/cupy/init.py", line 20, in
raise ImportError(f'''
ImportError:
Failed to import CuPy.
If you installed CuPy via wheels (cupy-cudaXXX or cupy-rocm-X-X), make sure that the package matches with the version of CUDA or ROCm installed.
On Linux, you may need to set LD_LIBRARY_PATH environment variable depending on how you installed CUDA/ROCm.
On Windows, try setting CUDA_PATH environment variable.
Check the Installation Guide for details:
https://docs.cupy.dev/en/latest/install.html
Original error:
ImportError: numpy.core.multiarray failed to import (auto-generated because you didn't call 'numpy.import_array()' after cimporting numpy; use 'numpy._import_array' to disable if you are certain you don't need it).
terminate called without an active exception