Rib v2 Jumper bank Needs circuit change

[madhephaestus]

There are 7 jumper configurations, 4 lables, this is confusing

[acamilo]

This is intentional. Everything is spaced out so that you can't put the jumper in sideways and short two rails together. I could silkscreen an X in there.

[madhephaestus]

ok, then make them seperate 2 pin headers then.

[madhephaestus]

Better idea:
Alternate source, rail pins instead of making one row the sources and one row the rail. If you alternate per pin, then every source pin is surrounded by rail pins no matter how the user plugs in the jumper.

Error free jumping can be done with a 4x2 - 0.1in header.

Row one:

5v, rail, HC5v, rail, ext

Row Two:

rail, 3.3v,rail,raw, rail

[madhephaestus]

Alternate the labels also to give more room for each and place the label near that actual voltage.

[acamilo]

This will make the routing needlessly complicated. What are the benefits of this design over the current one and how do they justify the more complex layout.