Skip to content

README.md

Latest commit

 

History

History
49 lines (28 loc) · 1.15 KB

README.md

File metadata and controls

49 lines (28 loc) · 1.15 KB
Raw

HomeScreen

HomeScreen

Wiring Diagram

Wires on Screen

Specific Wires

  • VIN -> POWER
  • GND -> GND
  • IO22 -> SCREEN_RX

WiringDiagram

Wires from Screen to MBMS

MBMSWiring

Programming the board

  1. Install VsCode with Platform IO Extension

  2. If missing the lib folders git clone the following folders into /lib/ https://github.com/Bodmer/TFT_eSPI https://github.com/PaulStoffregen/XPT2046_Touchscreen

  3. On the Right Side click the PlatformIO Icon and click on new Terminal

VSCodePlatformIO

  1. In the new terminal cd into the DisplayBoard folder

  2. To upload code you can use either of the following lines depending if you want to specify the port number. Make sure the

pio run -e upesy_wroom -t upload OR ```pio run -e upesy_wroom -t upload --upload-port COM6``

Where you can specify the COM Port from the device manager

  1. To stream the Serial output log you can use pio device monitor OR pio device monitor --port COM3 Where you can specify the COM Port from the device manager