Need to re-add the button that arms the alarm system. Ideally this would be via a dedicated module connected to the alarmsystem that handles all arm/disarm requests for MCP.
Arming via Keyswitch
- all zones (doors and motions) are immediately armed.
- the last discussed plan was to have a button push in MCP have a delay of maybe a minute before arming via keyswitch. Some kind of countdown or warning is needed.
- MCP would wait up to 3 minutes, check system is armed and if not attempt arming again.
- MCP would wait another duration, check system and attempt another re-arm
- MCP would check a final time and send notification at arm failed.
Need to re-add the button that arms the alarm system. Ideally this would be via a dedicated module connected to the alarmsystem that handles all arm/disarm requests for MCP.
Arming via Keyswitch