linux-blktests
diff --git a/‎.mailmap‎
Lines changed: 1 addition & 0 deletions b/‎.mailmap‎
Lines changed: 1 addition & 0 deletions
diff --git a/‎Documentation/ABI/testing/sysfs-driver-intel-xe-sriov‎
Lines changed: 31 additions & 0 deletions b/‎Documentation/ABI/testing/sysfs-driver-intel-xe-sriov‎
Lines changed: 31 additions & 0 deletions
diff --git a/‎Documentation/devicetree/bindings/arm/qcom.yaml‎
Lines changed: 6 additions & 0 deletions b/‎Documentation/devicetree/bindings/arm/qcom.yaml‎
Lines changed: 6 additions & 0 deletions
diff --git a/‎Documentation/devicetree/bindings/display/arm,komeda.yaml‎
Lines changed: 3 additions & 1 deletion b/‎Documentation/devicetree/bindings/display/arm,komeda.yaml‎
Lines changed: 3 additions & 1 deletion
diff --git a/‎Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml‎
Lines changed: 97 additions & 1 deletion b/‎Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml‎
Lines changed: 97 additions & 1 deletion
diff --git a/‎Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml‎
Lines changed: 18 additions & 0 deletions b/‎Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml‎
Lines changed: 18 additions & 0 deletions
diff --git a/‎Documentation/devicetree/bindings/display/bridge/lontium,lt8713sx.yaml‎
Lines changed: 113 additions & 0 deletions b/‎Documentation/devicetree/bindings/display/bridge/lontium,lt8713sx.yaml‎
Lines changed: 113 additions & 0 deletions
diff --git a/‎Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml‎
Lines changed: 11 additions & 4 deletions b/‎Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml‎
Lines changed: 11 additions & 4 deletions
diff --git a/‎Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml‎
Lines changed: 1 addition & 0 deletions b/‎Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml‎
Lines changed: 1 addition & 0 deletions
@@ -199,6 +199,7 @@ Christophe Leroy <[email protected]> <[email protected]>
 Christophe Ricard <[email protected]>
 Christopher Obbard <[email protected]> <[email protected]>
 Christoph Hellwig <[email protected]>
+Christoph Manszewski <[email protected]> <[email protected]>
 Chuck Lever <[email protected]> <[email protected]>
 Chuck Lever <[email protected]> <[email protected]>
 Chuck Lever <[email protected]> <[email protected]>
 
@@ -129,6 +129,37 @@ Description:
 			-EIO if FW refuses to change the provisioning.
 
 
+What:		/sys/bus/pci/drivers/xe/.../sriov_admin/.bulk_profile/vram_quota
+What:		/sys/bus/pci/drivers/xe/.../sriov_admin/vf<n>/profile/vram_quota
+Date:		February 2026
+KernelVersion:	7.0
+Contact:	[email protected]
+Description:
+		These files allow to perform initial VFs VRAM provisioning prior to VFs
+		enabling or to change VFs VRAM provisioning once the VFs are enabled.
+		Any non-zero initial VRAM provisioning will block VFs auto-provisioning.
+		Without initial VRAM provisioning those files will show result of the
+		VRAM auto-provisioning performed by the PF once the VFs are enabled.
+		Once the VFs are disabled, all VRAM provisioning will be released.
+		These files are visible only on discrete Intel Xe platforms with VRAM
+		and are writeable only if dynamic VFs VRAM provisioning is supported.
+
+		.bulk_profile/vram_quota: (WO) unsigned integer
+			The amount of the provisioned VRAM in [bytes] for each VF.
+			Actual quota value might be aligned per HW/FW requirements.
+
+		profile/vram_quota: (RW) unsigned integer
+			The amount of the provisioned VRAM in [bytes] for this VF.
+			Actual quota value might be aligned per HW/FW requirements.
+
+			Default is 0 (unprovisioned).
+
+		Writes to these attributes may fail with errors like:
+			-EINVAL if provided input is malformed or not recognized,
+			-EPERM if change is not applicable on given HW/FW,
+			-EIO if FW refuses to change the provisioning.
+
+
 What:		/sys/bus/pci/drivers/xe/.../sriov_admin/vf<n>/stop
 Date:		October 2025
 KernelVersion:	6.19
 
@@ -844,6 +844,12 @@ properties:
               - google,sargo
           - const: qcom,sdm670
 
+      - items:
+          - enum:
+              - google,bonito-tianma
+          - const: google,bonito
+          - const: qcom,sdm670
+
       - items:
           - enum:
               - qcom,sdx55-mtp
 
@@ -19,7 +19,9 @@ properties:
   compatible:
     oneOf:
       - items:
-          - const: arm,mali-d32
+          - enum:
+              - arm,mali-d32
+              - armchina,linlon-d6
           - const: arm,mali-d71
       - const: arm,mali-d71
 
 
@@ -85,6 +85,11 @@ properties:
   aux-bus:
     $ref: /schemas/display/dp-aux-bus.yaml#
 
+  connector:
+    type: object
+    $ref: /schemas/connector/usb-connector.yaml#
+    unevaluatedProperties: false
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
@@ -117,7 +122,6 @@ properties:
 
     required:
       - port@0
-      - port@1
 
 required:
   - compatible
@@ -127,6 +131,28 @@ required:
   - vdd33-supply
   - ports
 
+allOf:
+  - if:
+      required:
+        - aux-bus
+        - connector
+    then:
+      false
+
+  - if:
+      required:
+        - connector
+    then:
+      properties:
+        ports:
+          properties:
+            port@1: false
+    else:
+      properties:
+        ports:
+          required:
+            - port@1
+
 additionalProperties: false
 
 examples:
@@ -185,3 +211,73 @@ examples:
             };
         };
     };
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        encoder@58 {
+            compatible = "analogix,anx7625";
+            reg = <0x58>;
+            enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>;
+            vdd10-supply = <&pp1000_mipibrdg>;
+            vdd18-supply = <&pp1800_mipibrdg>;
+            vdd33-supply = <&pp3300_mipibrdg>;
+            analogix,audio-enable;
+            analogix,lane0-swing = /bits/ 8 <0x14 0x54 0x64 0x74>;
+            analogix,lane1-swing = /bits/ 8 <0x14 0x54 0x64 0x74>;
+
+            connector {
+                compatible = "usb-c-connector";
+                power-role = "dual";
+                data-role = "dual";
+                vbus-supply = <&vbus_reg>;
+
+                ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                        reg = <0>;
+
+                        endpoint {
+                            remote-endpoint = <&usb_hs>;
+                        };
+                    };
+
+                    port@1 {
+                        reg = <1>;
+
+                        endpoint {
+                            remote-endpoint = <&usb_ss>;
+                        };
+                    };
+
+                    port@2 {
+                        reg = <2>;
+
+                        endpoint {
+                            remote-endpoint = <&usb_sbu>;
+                        };
+                    };
+                };
+            };
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    endpoint {
+                        remote-endpoint = <&mipi_dsi>;
+                        bus-type = <7>;
+                        data-lanes = <0 1 2 3>;
+                    };
+                };
+            };
+        };
+    };
@@ -35,6 +35,15 @@ properties:
       - const: ldb
       - const: lvds
 
+  nxp,enable-termination-resistor:
+    type: boolean
+    description:
+      Indicates that the built-in 100 Ohm termination resistor on the LVDS
+      output is enabled. This property is optional and controlled via the
+      HS_EN bit in the LVDS_CTRL register. Enabling it can improve signal
+      quality and prevent visual artifacts on some boards, but increases
+      power consumption.
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
@@ -84,6 +93,15 @@ allOf:
       required:
         - reg-names
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx6sx-ldb
+    then:
+      properties:
+        nxp,enable-termination-resistor: false
+
 additionalProperties: false
 
 examples:
 
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/lontium,lt8713sx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lontium LT8713SX Type-C/DP1.4 to Type-C/DP1.4/HDMI2.0/DP++ bridge-hub
+
+maintainers:
+  - Vishnu Saini <[email protected]>
+
+description:
+  The Lontium LT8713SX is a Type-C/DP1.4 to Type-C/DP1.4/HDMI2.0 converter
+  that integrates one DP input and up to three configurable output interfaces
+  (DP1.4 / HDMI2.0 / DP++), with SST/MST functionality and audio support.
+
+properties:
+  compatible:
+    enum:
+      - lontium,lt8713sx
+
+  reg:
+    maxItems: 1
+
+  vcc-supply:
+    description: Regulator for 3.3V vcc.
+
+  vdd-supply:
+    description: Regulator for 1.1V vdd.
+
+  reset-gpios:
+    description: GPIO connected to active low RESET pin.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          DP port for DP input from soc to bridge chip
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          DP port for DP output from bridge
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Additional DP port for DP output from bridge
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Additional DP port for DP output from bridge
+
+    required:
+      - port@0
+
+required:
+  - compatible
+  - reg
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        bridge@4f {
+            compatible = "lontium,lt8713sx";
+            reg = <0x4f>;
+            reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    lt8713sx_dp_in: endpoint {
+                        remote-endpoint = <&mdss_dp0_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    lt8713sx_dp0_out: endpoint {
+                        remote-endpoint = <&dp0_connector_in>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+                    lt8713sx_dp1_out: endpoint {
+                        remote-endpoint = <&dp1_connector_in>;
+                    };
+                };
+
+                port@3 {
+                    reg = <3>;
+                    lt8713sx_dp2_out: endpoint {
+                        remote-endpoint = <&dp2_connector_in>;
+                    };
+                };
+            };
+        };
+    };
@@ -44,21 +44,28 @@ properties:
       port@0:
         $ref: /schemas/graph.yaml#/properties/port
         description:
-          Primary MIPI port-1 for MIPI input
+          DSI Port A input. directly drives the display, or works in
+          combination with Port B for higher resolution displays.
 
       port@1:
         $ref: /schemas/graph.yaml#/properties/port
         description:
-          Additional MIPI port-2 for MIPI input, used in combination
-          with primary MIPI port-1 to drive higher resolution displays
+          DSI Port B input. Can be used alone if DSI is physically
+          connected to Port B, or in combination with Port A for higher
+          resolution displays.
 
       port@2:
         $ref: /schemas/graph.yaml#/properties/port
         description:
           HDMI port for HDMI output
 
+    anyOf:
+      - required:
+          - port@0
+      - required:
+          - port@1
+
     required:
-      - port@0
       - port@2
 
 required:
 
@@ -33,6 +33,7 @@ properties:
     oneOf:
       - items:
           - enum:
+              - doestek,dtc34lm85am # For the Doestek DTC34LM85AM Flat Panel Display (FPD) Transmitter
               - onnn,fin3385  # OnSemi FIN3385
               - ti,ds90c185   # For the TI DS90C185 FPD-Link Serializer
               - ti,ds90c187   # For the TI DS90C187 FPD-Link Serializer