Revert "arm64: dts: rockchip: Further describe the WiFi for the Pinebook Pro"

This reverts commit 6d54d93.

It seems there are different variants of the Wifi chipset in use on the
Pinebook Pro. And according to the reported regression - see Closes
below, the reverted change causes issues with one Wifi chipset.

The original commit message indicates a "further description" only and
does not indicate this would fix an actual problem, so a revert should
not cause further problems.

Fixes: 6d54d93 ("arm64: dts: rockchip: Further describe the WiFi for the Pinebook Pro")
Cc: Jan Palus <[email protected]>
Cc: Peter Robinson <[email protected]>
Cc: Thorsten Leemhuis <[email protected]>
Cc: [email protected]
Closes: https://lore.kernel.org/r/[email protected]/
Tested-by: Jan Palus <[email protected]>
Reviewed-by: Dragan Simic <[email protected]>
Signed-off-by: Heiko Stuebner <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Heiko Stuebner <[email protected]>

Author: mmind

arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts

@@ -879,12 +879,6 @@
 		};
 	};
 
-	wifi {
-		wifi_host_wake_l: wifi-host-wake-l {
-			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
 	wireless-bluetooth {
 		bt_wake_pin: bt-wake-pin {
 			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -942,19 +936,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
 	sd-uhs-sdr104;
-	#address-cells = <1>;
-	#size-cells = <0>;
 	status = "okay";
-
-	brcmf: wifi@1 {
-		compatible = "brcm,bcm4329-fmac";
-		reg = <1>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "host-wake";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_host_wake_l>;
-	};
 };
 
 &sdhci {