nvme: remove "udevadm settle" after _nvme_connect_subsys

The previous commit introduced "udevadm settle" command at the end of
_nvme_connect_subsys. Then the command is no longer required after
calling _nvme_connect_subsys in test cases.

Reviewed-by: Daniel Wagner <[email protected]>
Signed-off-by: Shin'ichiro Kawasaki <[email protected]>

Author: kawasaki

tests/nvme/005

@@ -40,8 +40,6 @@ test() {
 
 	nvmedev=$(_find_nvme_dev "${def_subsysnqn}")
 
-	udevadm settle
-
 	echo 1 > "/sys/class/nvme/${nvmedev}/reset_controller"
 
 	_nvme_disconnect_ctrl "${nvmedev}"

tests/nvme/008

@@ -40,8 +40,6 @@ test() {
 	cat "/sys/block/${nvmedev}n1/uuid"
 	cat "/sys/block/${nvmedev}n1/wwid"
 
-	udevadm settle
-
 	_nvme_disconnect_subsys "${def_subsysnqn}"
 
 	_remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"

tests/nvme/009

@@ -36,8 +36,6 @@ test() {
 	cat "/sys/block/${nvmedev}n1/uuid"
 	cat "/sys/block/${nvmedev}n1/wwid"
 
-	udevadm settle
-
 	_nvme_disconnect_subsys "${def_subsysnqn}"
 
 	_remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"

tests/nvme/040

@@ -35,7 +35,6 @@ test() {
 	_create_nvmet_host "${def_subsysnqn}" "${def_hostnqn}"
 
 	_nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}"
-	udevadm settle
 	nvmedev=$(_find_nvme_dev "${def_subsysnqn}")
 
 	# start fio job

tests/nvme/041

@@ -57,8 +57,6 @@ test() {
 			     --hostid "${def_hostid}" \
 			     --dhchap-secret "${hostkey}"
 
-	udevadm settle
-
 	_nvme_disconnect_subsys "${def_subsysnqn}"
 
 	_remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"

tests/nvme/042

@@ -50,7 +50,6 @@ test() {
 				     --hostnqn "${def_hostnqn}" \
 				     --hostid "${def_hostid}" \
 				     --dhchap-secret "${hostkey}"
-		udevadm settle
 
 		_nvme_disconnect_subsys "${def_subsysnqn}"
 	done
@@ -69,8 +68,6 @@ test() {
 				     --hostid "${def_hostid}" \
 				     --dhchap-secret "${hostkey}"
 
-		udevadm settle
-
 		_nvme_disconnect_subsys "${def_subsysnqn}"
 	done
 

tests/nvme/043

@@ -55,8 +55,6 @@ test() {
 				     --hostid "${def_hostid}" \
 				     --dhchap-secret "${hostkey}"
 
-		udevadm settle
-
 		_nvme_disconnect_subsys "${def_subsysnqn}"
 	done
 
@@ -71,8 +69,6 @@ test() {
 				      --hostid "${def_hostid}" \
 				      --dhchap-secret "${hostkey}"
 
-		udevadm settle
-
 		_nvme_disconnect_subsys "${def_subsysnqn}"
 	done
 

tests/nvme/044

@@ -59,8 +59,6 @@ test() {
 			     --hostid "${def_hostid}" \
 			     --dhchap-secret "${hostkey}"
 
-	udevadm settle
-
 	_nvme_disconnect_subsys "${def_subsysnqn}"
 
 	# Step 2: Connect with host authentication
@@ -72,8 +70,6 @@ test() {
 			     --dhchap-secret "${hostkey}" \
 			     --dhchap-ctrl-secret "${hostkey}"
 
-	udevadm settle
-
 	_nvme_disconnect_subsys "${def_subsysnqn}"
 
 	# Step 3: Connect with host authentication
@@ -85,8 +81,6 @@ test() {
 			     --dhchap-secret "${hostkey}" \
 			     --dhchap-ctrl-secret "${ctrlkey}"
 
-	udevadm settle
-
 	_nvme_disconnect_subsys "${def_subsysnqn}"
 
 	# Step 4: Connect with host authentication
@@ -99,8 +93,6 @@ test() {
 			     --dhchap-secret "${hostkey}" \
 			     --dhchap-ctrl-secret "${invkey}"
 
-	udevadm settle
-
 	_nvme_disconnect_subsys "${def_subsysnqn}"
 
 	_remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"

tests/nvme/045

@@ -61,8 +61,6 @@ test() {
 			     --dhchap-secret "${hostkey}" \
 			     --dhchap-ctrl-secret "${ctrlkey}"
 
-	udevadm settle
-
 	echo "Re-authenticate with original host key"
 
 	ctrldev=$(_find_nvme_dev "${def_subsysnqn}")