Skip to content

schedule-antivirus-scans-powershell.md

Latest commit

 

History

History
178 lines (128 loc) · 9.75 KB

schedule-antivirus-scans-powershell.md

File metadata and controls

178 lines (128 loc) · 9.75 KB

title: Schedule antivirus scans using PowerShell description: Schedule antivirus scans using PowerShell ms.service: defender-endpoint ms.localizationpriority: medium author: chrisda ms.author: chrisda ms.custom: nextgen ms.date: 12/16/2025 ms.reviewer: pauhijbr, ksarens manager: bagol ms.subservice: ngp ms.topic: how-to ms.collection:

  • m365-security
  • tier2
  • mde-ngp search.appverid: met150 appliesto:
    • Microsoft Defender for Endpoint Plan 1
    • Microsoft Defender for Endpoint Plan 2
    • Microsoft Defender for Business
    • Microsoft Defender Antivirus

Schedule antivirus scans using PowerShell

This article describes how to use the Set-MpPreference PowerShell cmdlet to configure scheduled scans. To learn more about scheduling scans and about scan types, see About scheduled quick or full Microsoft Defender Antivirus scans.

Prerequisites

Supported operating systems:

  • Windows
  • Windows Server

Important PowerShell parameters for scheduled scans

The following Set-MpPreference parameters are important for scheduled scans:

  • ScanParameters: Specifies the scan type to use for scheduled scans. Valid values are:

    • 1 or QuickScan (default)
    • 2 or FullScan

  • ScanScheduleDay: Specifies the day of the week to run scheduled scans. Valid values are:

    • 0 or Everyday (default)
    • 1 or Sunday
    • 2 or Monday
    • 3 or Tuesday
    • 4 or Wednesday
    • 5 or Thursday
    • 6 or Friday
    • 7 or Saturday
    • 8 or Never

  • ScanScheduleQuickScanTime: Specifies the time on the local computer to run scheduled quick scans. To specify a value, enter it as a time span: hh:mm:ss where hh = hours, mm = minutes and ss = seconds. For example, 13:30:00 indicates 1:30 PM. The default value is 02:00:00 (2:00 AM).

  • ScanScheduleTime: Specifies the time on the local computer to run scheduled full scans. To specify a value, enter it as a time span: hh:mm:ss where hh = hours, mm = minutes and ss = seconds. For example, 13:30:00 indicates 1:30 PM. The default value is 02:00:00 (2:00 AM).

  • ScanScheduleOffset: Specifies the fixed number of minutes to delay scheduled scan start times on the device. The default value is 120, which means scheduled scans start 2 hours after the times specified by the ScanScheduleTime and ScanScheduleQuickScanTime parameters.

  • RandomizeScheduleTaskTimes: Specifies whether to select a random time for the scheduled tasks (including scheduled scans). Valid values are:

    • $true: Scheduled tasks begin within 30 minutes before or after the scheduled time. This value is the default.
    • $false: Scheduled tasks begin on the scheduled time.

    Randomized start times can distribute the effects of scanning. For example, if several virtual machines share the same host, randomized start times prevent all virtual machines from starting the scheduled tasks at the same time.

  • SchedulerRandomizationTime: Specifies the time window, in minutes, within which scheduled tasks in Microsoft Defender (including scheduled scans) can randomly start. Scheduled tasks can start within the specified number of minutes before or after the time of the scheduled task. A valid value is an integer from 0 to 4294967295.

    The randomization time window is used around specific start time values (for example, ScanScheduleTime and ScanScheduleQuickScanTime parameters) or around the number of minutes specified by the ScanScheduleOffset parameter.

  • ScanOnlyIfIdleEnabled: Specifies whether to start scheduled scans only when the computer isn't in use. Valid values are:

    • $true: Windows Defender runs schedules scans when the computer is on, but not in use. This value is the default.
    • $false: Windows Defender runs schedules scans when the computer is in use.

Tip

We recommend the following settings for scheduled quick scans:

  • Real-time protection enabled (-DisableRealtimeMonitoring $false, which is the default value).
  • Cloud Protection enabled.
  • Network connectivity to the Cloud Protection backend.

Use PowerShell to scheduling daily quick scans

This example sets the daily scheduled quick scan to ±4 minutes of 12:30 PM. The device is likely on, but activity on the device is likely minimal (lunch).

Set-MpPreference -ScanScheduleQuickScanTime 12:30:00 -ScanScheduleOffset 0 -RandomizeScheduleTaskTimes $false -ScanOnlyIfIdleEnabled $false

We didn't need to use the following parameters in this command:

  • ScanParameters: The default value is 0 (QuickScan).
  • ScanScheduleDay: The default value is 0 (Everyday).

Use PowerShell to schedule weekly full scans

This example schedules a weekly full scan every Wednesday at to ±4 minutes of 12:30 PM.

Set-MpPreference -ScanParameters FullScan -ScanScheduleDay Wednesday -ScanScheduleQuickScanTime 12:30:00 -ScanScheduleOffset 0 -RandomizeScheduleTaskTimes $false

General PowerShell parameters for scheduled scans

The following Set-MpPreference parameters are also available for scheduled scans:

  • CheckForSignaturesBeforeRunningScan: Specifies whether to check for new virus and spyware definitions before Windows Defender runs scheduled scans. Valid values are:

    • $true: Windows Defender checks for new definitions before running a scheduled scan.
    • $false: The scheduled scan begins with the existing definitions. This value is the default.

  • ScanAvgCPULoadFactor: Specifies the maximum percentage CPU usage for a scan. A valid value is an integer from 5 to 100. The default value is 50. The value 0 disables CPU throttling. This value isn't a hard limit, but rather guidance for the scanning engine to not exceed the specified value on average.

    The value of this parameter is ignored if both of the following conditions are true:

    • The value of the ScanOnlyIfIdleEnabled parameter is $true (scan only when the computer isn't in use).
    • The value of the DisableCpuThrottleOnIdleScans parameter is $true (disable CPU throttling on idle scans).

  • DisableCpuThrottleOnIdleScans: Specifies whether to disable CPU throttling for scheduled scans while the device is idle (less than 90% CPU utilization). Valid values are:

    • $true: The CPU isn't throttled for scheduled scans, regardless of the value of the ScanAvgCPULoadFactor parameter. This value is the default.
    • $false: The CPU is throttled for scheduled scans.

  • EnableLowCpuPriority: Specifies whether to enable using low CPU priority for scheduled scans. Valid values are:

    • $true: Windows Defender uses low CPU priority for scheduled scans. This value is the default.
    • $false: Windows Defender doesn't use low CPU priority for scheduled scans.

  • DisableCatchupFullScan: Specifies whether to disable catch-up scans for missed scheduled full scans. Valid values are:

    • $true: Windows Defender doesn't run catch-up scans for missed scheduled full scans. This value is the default.
    • $false: After two missed scheduled full scans, Windows Defender runs a catch-up scan the next time someone signs in to the computer.

  • DisableCatchupQuickScan: Specifies whether to disable catch-up scans for missed scheduled quick scans. Valid values are:

    • $true: Windows Defender doesn't run catch-up scans for missed scheduled quick scans. This value is the default.
    • $false: After two missed scheduled quick scans, Windows Defender runs a catch-up scan the next time someone signs in to the computer.

  • EnableFullScanOnBatteryPower: Specifies whether to enable full scans while on battery power. Valid values are:

    • $true: Windows Defender does full scans while on battery power.
    • $false: Windows Defender doesn't do full scans while on battery power. This value is the default

For more information, see Use PowerShell cmdlets to configure and manage Microsoft Defender Antivirus and Defender Antivirus cmdlets.

PowerShell parameters for scheduled scans to complete remediation

Scheduled full scans to complete remediation use the following parameters:

  • RemediationScheduleDay: Specifies the day of the week to run the scan. Valid values are:

    • 0 or Everyday (default)
    • 1 or Sunday
    • 2 or Monday
    • 3 or Tuesday
    • 4 or Wednesday
    • 5 or Thursday
    • 6 or Friday
    • 7 or Saturday
    • 8 or Never

  • RemediationScheduleTime: Specifies the time on the local computer to run the scan. To specify a value, enter it as a time span: hh:mm:ss where hh = hours, mm = minutes and ss = seconds. For example, 13:30:00 indicates 1:30 PM. The default value is 02:00:00 (2:00 AM).

See also

Troubleshoot Microsoft Defender Antivirus scan issues

Use PowerShell cmdlets to configure and manage Microsoft Defender Antivirus

Set the PowerShell cmdlet to configure and manage Microsoft Defender Antivirus

Defender Antivirus specific PowerShell functions

Tip

If you're looking for Antivirus related information for other platforms, see the following resources: