Merge pull request #309288 from mumian/1210-learn-modules

[SCOPED] retire learn modules

Author: JamesJBarnett

articles/azure-resource-manager/bicep/add-template-to-azure-pipelines.md

@@ -3,14 +3,14 @@ title: 'Quickstart: Integrate Bicep with Azure Pipelines'
 description: This quickstart explains how to use Bicep and `.bicepparam` files to configure continuous integration and continuous deployments in Azure Pipelines, plus how to use an Azure CLI task to deploy a `.bicepparam` file.
 ms.topic: quickstart
 ms.custom: devx-track-bicep, devx-track-azurecli
-ms.date: 10/30/2025
+ms.date: 12/10/2025
 ---
 
 # Quickstart: Integrate Bicep with Azure Pipelines
 
 This quickstart shows you how to integrate Bicep files with Azure Pipelines for continuous integration and continuous deployment.
 
-It provides a short introduction to the pipeline task you need for deploying a Bicep file. For more detailed steps on setting up the pipeline and project, see the [Deploy Azure resources by using Bicep and Azure Pipelines](/training/paths/bicep-azure-pipelines/) Microsoft Learn module.
+It provides a short introduction to the pipeline task you need for deploying a Bicep file.
 
 ## Prerequisites
 

articles/azure-resource-manager/bicep/best-practices.md

@@ -1,20 +1,14 @@
 ---
 title: Learn best practices when developing Bicep files
 description: Describes practices to follow when creating your Bicep files so they work well and are easy to maintain.
-author: johndowns
-ms.author: jodowns
 ms.topic: article
 ms.custom: devx-track-bicep
-ms.date: 10/30/2025
+ms.date: 12/10/2025
 ---
 # Best practices for Bicep
 
 This article recommends practices to follow when developing your Bicep files. These practices make your Bicep file easier to understand and use.
 
-### Training resources
-
-If you would rather learn about Bicep best practices through step-by-step guidance, see [Structure your Bicep code for collaboration](/training/modules/structure-bicep-code-collaboration/).
-
 ## Parameters
 
 * Use good naming for parameter declarations. Good names make your templates easy to read and understand. Make sure you're using clear, descriptive names, and be consistent in your naming.

articles/azure-resource-manager/bicep/child-resource-name-type.md

@@ -3,7 +3,7 @@ title: Child resources in Bicep
 description: Describes how to set the name and type for child resources in Bicep.
 ms.topic: article
 ms.custom: devx-track-bicep
-ms.date: 04/28/2025
+ms.date: 12/10/2025
 ---
 
 # Set name and type for child resources in Bicep
@@ -14,10 +14,6 @@ Each parent resource accepts only certain resource types as child resources. The
 
 This article show different ways you can declare a child resource.
 
-### Training resources
-
-If you would rather learn about child resources through step-by-step guidance, see [Deploy child and extension resources by using Bicep](/training/modules/child-extension-bicep-templates).
-
 ## Name and type pattern
 
 In Bicep, you can specify the child resource either within the parent resource or outside of the parent resource. The values you provide for the resource name and resource type vary based on how you declare the child resource. However, the full name and type always resolve to the same pattern.

articles/azure-resource-manager/bicep/conditional-resource-deployment.md

@@ -5,7 +5,7 @@ ms.topic: article
 ms.custom:
   - devx-track-bicep
   - build-2025
-ms.date: 09/10/2025
+ms.date: 12/10/2025
 ---
 
 # Conditional deployments in Bicep with the if expression
@@ -17,10 +17,6 @@ To optionally deploy a resource or module in Bicep, use the `if` expression. An
 
 Bicep diagnostic code [BCP318](./diagnostics/bcp318.md) occurs when you try to access a property on a conditional resource that may be null if the resource isn't deployed. To suppress the warning or prevent a runtime exception, use the [null-forgiving operator](./operator-null-forgiving.md) or [safe-dereference operator](./operator-safe-dereference.md). For more information, see [BCP318](./diagnostics/bcp318.md#solutions).
 
-### Training resources
-
-If you would rather learn about conditions through step-by-step guidance, see [Build flexible Bicep files by using conditions and loops](/training/modules/build-flexible-bicep-templates-conditions-loops/).
-
 ## Define condition for deployment
 
 In Bicep, you can conditionally deploy a resource by passing in a parameter that specifies if the resource is deployed. Test the condition with an `if` expression in the resource declaration. The following example shows the syntax for an `if` expression in a Bicep file. It conditionally deploys a Domain Name System (DNS) zone. When `deployZone` is `true`, it deploys the DNS zone. When `deployZone` is `false`, it skips deploying the DNS zone.

articles/azure-resource-manager/bicep/deploy-to-management-group.md

@@ -3,7 +3,7 @@ title: Use Bicep to deploy resources to management group
 description: Describes how to create a Bicep file that deploys resources at the management group scope.
 ms.topic: how-to
 ms.custom: devx-track-bicep
-ms.date: 10/30/2025
+ms.date: 12/10/2025
 ---
 
 # Management group deployments with Bicep files
@@ -12,10 +12,6 @@ This article describes how to set scope with Bicep when deploying to a managemen
 
 As your organization matures, you can deploy a Bicep file to create resources at the management group level. For example, you may need to define and assign [policies](../../governance/policy/overview.md) or [Azure role-based access control (Azure RBAC)](../../role-based-access-control/overview.md) for a management group. With management group level templates, you can declaratively apply policies and assign roles at the management group level. For more information, see [Understand scope](../management/overview.md#understand-scope).
 
-### Training resources
-
-If you would rather learn about deployment scopes through step-by-step guidance, see [Deploy resources to subscriptions, management groups, and tenants by using Bicep](/training/modules/deploy-resources-scopes-bicep/).
-
 ## Supported resources
 
 Not all resource types can be deployed to the management group level. This section lists which resource types are supported.

articles/azure-resource-manager/bicep/deploy-to-resource-group.md

@@ -3,7 +3,7 @@ title: Use Bicep to deploy resources to resource groups
 description: Learn how to deploy resources in a Bicep file and how to target more than one resource group.
 ms.topic: how-to
 ms.custom: devx-track-bicep
-ms.date: 10/30/2025
+ms.date: 12/10/2025
 ---
 
 # Use Bicep to deploy resources to resource groups

articles/azure-resource-manager/bicep/deploy-to-subscription.md

@@ -3,7 +3,7 @@ title: Use Bicep to deploy resources to subscription
 description: Describes how to create a Bicep file that deploys resources to the Azure subscription scope.
 ms.topic: how-to
 ms.custom: devx-track-bicep
-ms.date: 10/30/2025
+ms.date: 12/10/2025
 ---
 
 # Subscription deployments with Bicep files
@@ -15,10 +15,6 @@ This article describes how to set the deployment scope to a subscription in a Bi
 > [!NOTE]
 > You can deploy to 800 different resource groups in a subscription level deployment.
 
-### Training resources
-
-If you would rather learn about deployment scopes through step-by-step guidance, see [Deploy resources to subscriptions, management groups, and tenants by using Bicep](/training/modules/deploy-resources-scopes-bicep/).
-
 ## Supported resources
 
 Not all resource types can be deployed to the subscription level. This section lists which resource types are supported.

articles/azure-resource-manager/bicep/deploy-to-tenant.md

@@ -2,7 +2,7 @@
 title: Use Bicep to deploy resources to tenant
 description: Describes how to deploy resources at the tenant scope in a Bicep file.
 ms.topic: how-to
-ms.date: 10/30/2025
+ms.date: 12/10/2025
 ms.custom:
   - devx-track-bicep
   - sfi-ga-nochange
@@ -247,5 +247,3 @@ Now that you understand tenant deployments, explore these related deployment sco
 - **[Resource group deployments](deploy-to-resource-group.md)** - Deploy resources to a specific resource group
 - **[Subscription deployments](deploy-to-subscription.md)** - Deploy resources at the subscription level
 - **[Management group deployments](deploy-to-management-group.md)** - Deploy resources to management groups
-
-For hands-on practice, try the training module: [Deploy resources to subscriptions, management groups, and tenants by using Bicep](/training/modules/deploy-resources-scopes-bicep/).

articles/azure-resource-manager/bicep/deploy-what-if.md

@@ -2,7 +2,7 @@
 title: 'Bicep What-If: Preview Changes Before Deployment'
 description: Determine what changes will happen to your resources before deploying a Bicep file.
 ms.topic: article
-ms.date: 08/19/2025
+ms.date: 12/10/2025
 ms.custom:
   - devx-track-bicep, devx-track-azurecli, devx-track-azurepowershell
   - ai-gen-docs-bap
@@ -557,5 +557,3 @@ Remove-AzResourceGroup -Name ExampleGroup
 
 - To use the what-if operation in a pipeline, see [Test ARM templates with What-If in a pipeline](https://4bes.nl/2021/03/06/test-arm-templates-with-what-if/).
 - If you notice incorrect results from the what-if operation, report the issues at [https://aka.ms/whatifissues](https://aka.ms/whatifissues).
-- For a Learn module that demonstrates using what-if, see [Preview changes and validate Azure resources by using what-if and the ARM template test toolkit](/training/modules/arm-template-test/).
-

articles/azure-resource-manager/bicep/deployment-script-bicep.md

@@ -3,7 +3,7 @@ title: Use deployment scripts in Bicep
 description: Learn how to create, monitor, and troubleshoot deployment scripts in Bicep.
 ms.custom: devx-track-bicep
 ms.topic: how-to
-ms.date: 10/30/2025
+ms.date: 12/10/2025
 ---
 
 # Use deployment scripts in Bicep
@@ -31,10 +31,6 @@ The deployment script resource is available only in the regions where Azure Cont
 >
 > For pricing information, see [Azure Container Instances pricing](https://azure.microsoft.com/pricing/details/container-instances/) and [Azure Blob Storage pricing](https://azure.microsoft.com/pricing/details/storage/blobs/). To learn more, see [Clean up deployment script resources](./deployment-script-develop.md#clean-up-deployment-script-resources).
 
-### Training resources
-
-If you prefer to learn about deployment scripts through step-by-step guidance, see the [Extend Bicep and ARM templates by using deployment scripts](/training/modules/extend-resource-manager-template-deployment-scripts) Microsoft Learn module.
-
 ## Configure the minimum permissions
 
 For deployment script API version `2020-10-01` or later, two principals are involved in deployment script execution:
@@ -501,9 +497,7 @@ You can run deployment scripts in private networks with some additional configur
 
 ## Next steps
 
-In this article, you learned how to use deployment scripts. To learn more, see the [Extend Bicep and ARM templates using deployment scripts](/training/modules/extend-resource-manager-template-deployment-scripts) module from Microsoft Learn.
-
-To explore the topics in this article, see:
+In this article, you learned how to use deployment scripts. To explore the topics in this article, see:
 
 - [Develop a deployment script in Bicep](./deployment-script-develop.md)
 - [Access a private virtual network from a Bicep deployment script](./deployment-script-vnet.md)