spi: apple: Add driver for Apple SPI controller

This SPI controller is present in Apple SoCs such as the M1 (t8103) and
M1 Pro/Max (t600x). It is a relatively straightforward design with two
16-entry FIFOs, arbitrary transfer sizes (up to 2**32 - 1) and fully
configurable word size up to 32 bits. It supports one hardware CS line
which can also be driven via the pinctrl/GPIO driver instead, if
desired. TX and RX can be independently enabled.

There are a surprising number of knobs for tweaking details of the
transfer, most of which we do not use right now. Hardware CS control
is available, but we haven't found a way to make it stay low across
multiple logical transfers, so we just use software CS control for now.

There is also a shared DMA offload coprocessor that can be used to handle
larger transfers without requiring an IRQ every 8-16 words, but that
feature depends on a bunch of scaffolding that isn't ready to be
upstreamed yet, so leave it for later.

The hardware shares some register bit definitions with spi-s3c24xx which
suggests it has a shared legacy with Samsung SoCs, but it is too
different to warrant sharing a driver.

Signed-off-by: Hector Martin <[email protected]>

Author: marcan

drivers/spi/Kconfig

@@ -79,6 +79,14 @@ config SPI_ALTERA_DFL
 	  Altera SPI master controller.  The SPI master is connected
 	  to a SPI slave to Avalon bridge in a Intel MAX BMC.
 
+config SPI_APPLE
+	tristate "Apple SoC SPI Controller platform driver"
+	depends on ARCH_APPLE || COMPILE_TEST
+	help
+	  This enables support for the SPI controller present on
+	  many Apple SoCs, including the t8103 (M1) and t600x
+	  (M1 Pro/Max).
+
 config SPI_AR934X
 	tristate "Qualcomm Atheros AR934X/QCA95XX SPI controller driver"
 	depends on ATH79 || COMPILE_TEST

drivers/spi/Makefile

@@ -17,6 +17,7 @@ obj-$(CONFIG_SPI_LOOPBACK_TEST)		+= spi-loopback-test.o
 obj-$(CONFIG_SPI_ALTERA)		+= spi-altera-platform.o
 obj-$(CONFIG_SPI_ALTERA_CORE)		+= spi-altera-core.o
 obj-$(CONFIG_SPI_ALTERA_DFL)		+= spi-altera-dfl.o
+obj-$(CONFIG_SPI_APPLE)			+= spi-apple.o
 obj-$(CONFIG_SPI_AR934X)		+= spi-ar934x.o
 obj-$(CONFIG_SPI_ARMADA_3700)		+= spi-armada-3700.o
 obj-$(CONFIG_SPI_ASPEED_SMC)		+= spi-aspeed-smc.o