Merge tag 'i2c-for-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
 "Just two driver fixes"

* tag 'i2c-for-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: ocores: generate stop condition after timeout in polling mode
  i2c: mchp-pci1xxxx: Update Timing registers

Author: torvalds

drivers/i2c/busses/i2c-mchp-pci1xxxx.c

@@ -48,9 +48,9 @@
  * SR_HOLD_TIME_XK_TICKS field will indicate the number of ticks of the
  * baud clock required to program 'Hold Time' at X KHz.
  */
-#define SR_HOLD_TIME_100K_TICKS	133
-#define SR_HOLD_TIME_400K_TICKS	20
-#define SR_HOLD_TIME_1000K_TICKS	11
+#define SR_HOLD_TIME_100K_TICKS		150
+#define SR_HOLD_TIME_400K_TICKS		20
+#define SR_HOLD_TIME_1000K_TICKS	12
 
 #define SMB_CORE_COMPLETION_REG_OFF3	(SMBUS_MAST_CORE_ADDR_BASE + 0x23)
 
@@ -65,17 +65,17 @@
  * the baud clock required to program 'fair idle delay' at X KHz. Fair idle
  * delay establishes the MCTP T(IDLE_DELAY) period.
  */
-#define FAIR_BUS_IDLE_MIN_100K_TICKS		969
-#define FAIR_BUS_IDLE_MIN_400K_TICKS		157
-#define FAIR_BUS_IDLE_MIN_1000K_TICKS		157
+#define FAIR_BUS_IDLE_MIN_100K_TICKS		992
+#define FAIR_BUS_IDLE_MIN_400K_TICKS		500
+#define FAIR_BUS_IDLE_MIN_1000K_TICKS		500
 
 /*
  * FAIR_IDLE_DELAY_XK_TICKS field will indicate the number of ticks of the
  * baud clock required to satisfy the fairness protocol at X KHz.
  */
-#define FAIR_IDLE_DELAY_100K_TICKS	1000
-#define FAIR_IDLE_DELAY_400K_TICKS	500
-#define FAIR_IDLE_DELAY_1000K_TICKS	500
+#define FAIR_IDLE_DELAY_100K_TICKS	963
+#define FAIR_IDLE_DELAY_400K_TICKS	156
+#define FAIR_IDLE_DELAY_1000K_TICKS	156
 
 #define SMB_IDLE_SCALING_100K		\
 	((FAIR_IDLE_DELAY_100K_TICKS << 16) | FAIR_BUS_IDLE_MIN_100K_TICKS)
@@ -105,7 +105,7 @@
  */
 #define BUS_CLK_100K_LOW_PERIOD_TICKS		156
 #define BUS_CLK_400K_LOW_PERIOD_TICKS		41
-#define BUS_CLK_1000K_LOW_PERIOD_TICKS	15
+#define BUS_CLK_1000K_LOW_PERIOD_TICKS		15
 
 /*
  * BUS_CLK_XK_HIGH_PERIOD_TICKS field defines the number of I2C Baud Clock
@@ -131,7 +131,7 @@
  */
 #define CLK_SYNC_100K			4
 #define CLK_SYNC_400K			4
-#define CLK_SYNC_1000K		4
+#define CLK_SYNC_1000K			4
 
 #define SMB_CORE_DATA_TIMING_REG_OFF	(SMBUS_MAST_CORE_ADDR_BASE + 0x40)
 
@@ -142,25 +142,25 @@
  * determines the SCLK hold time following SDAT driven low during the first
  * START bit in a transfer.
  */
-#define FIRST_START_HOLD_100K_TICKS	22
-#define FIRST_START_HOLD_400K_TICKS	16
-#define FIRST_START_HOLD_1000K_TICKS	6
+#define FIRST_START_HOLD_100K_TICKS	23
+#define FIRST_START_HOLD_400K_TICKS	8
+#define FIRST_START_HOLD_1000K_TICKS	12
 
 /*
  * STOP_SETUP_XK_TICKS will indicate the number of ticks of the baud clock
  * required to program 'STOP_SETUP' timer at X KHz. This timer determines the
  * SDAT setup time from the rising edge of SCLK for a STOP condition.
  */
-#define STOP_SETUP_100K_TICKS		157
+#define STOP_SETUP_100K_TICKS		150
 #define STOP_SETUP_400K_TICKS		20
-#define STOP_SETUP_1000K_TICKS	12
+#define STOP_SETUP_1000K_TICKS		12
 
 /*
  * RESTART_SETUP_XK_TICKS will indicate the number of ticks of the baud clock
  * required to program 'RESTART_SETUP' timer at X KHz. This timer determines the
  * SDAT setup time from the rising edge of SCLK for a repeated START condition.
  */
-#define RESTART_SETUP_100K_TICKS	157
+#define RESTART_SETUP_100K_TICKS	156
 #define RESTART_SETUP_400K_TICKS	20
 #define RESTART_SETUP_1000K_TICKS	12
 
@@ -169,7 +169,7 @@
  * required to program 'DATA_HOLD' timer at X KHz. This timer determines the
  * SDAT hold time following SCLK driven low.
  */
-#define DATA_HOLD_100K_TICKS		2
+#define DATA_HOLD_100K_TICKS		12
 #define DATA_HOLD_400K_TICKS		2
 #define DATA_HOLD_1000K_TICKS		2
 
@@ -190,35 +190,35 @@
  * Bus Idle Minimum time = BUS_IDLE_MIN[7:0] x Baud_Clock_Period x
  * (BUS_IDLE_MIN_XK_TICKS[7] ? 4,1)
  */
-#define BUS_IDLE_MIN_100K_TICKS		167UL
-#define BUS_IDLE_MIN_400K_TICKS		139UL
-#define BUS_IDLE_MIN_1000K_TICKS		133UL
+#define BUS_IDLE_MIN_100K_TICKS		36UL
+#define BUS_IDLE_MIN_400K_TICKS		10UL
+#define BUS_IDLE_MIN_1000K_TICKS	4UL
 
 /*
  * CTRL_CUM_TIME_OUT_XK_TICKS defines SMBus Controller Cumulative Time-Out.
  * SMBus Controller Cumulative Time-Out duration =
  * CTRL_CUM_TIME_OUT_XK_TICKS[7:0] x Baud_Clock_Period x 2048
  */
-#define CTRL_CUM_TIME_OUT_100K_TICKS		159
-#define CTRL_CUM_TIME_OUT_400K_TICKS		159
-#define CTRL_CUM_TIME_OUT_1000K_TICKS		159
+#define CTRL_CUM_TIME_OUT_100K_TICKS		76
+#define CTRL_CUM_TIME_OUT_400K_TICKS		76
+#define CTRL_CUM_TIME_OUT_1000K_TICKS		76
 
 /*
  * TARGET_CUM_TIME_OUT_XK_TICKS defines SMBus Target Cumulative Time-Out duration.
  * SMBus Target Cumulative Time-Out duration = TARGET_CUM_TIME_OUT_XK_TICKS[7:0] x
  * Baud_Clock_Period x 4096
  */
-#define TARGET_CUM_TIME_OUT_100K_TICKS	199
-#define TARGET_CUM_TIME_OUT_400K_TICKS	199
-#define TARGET_CUM_TIME_OUT_1000K_TICKS	199
+#define TARGET_CUM_TIME_OUT_100K_TICKS	95
+#define TARGET_CUM_TIME_OUT_400K_TICKS	95
+#define TARGET_CUM_TIME_OUT_1000K_TICKS	95
 
 /*
  * CLOCK_HIGH_TIME_OUT_XK defines Clock High time out period.
  * Clock High time out period = CLOCK_HIGH_TIME_OUT_XK[7:0] x Baud_Clock_Period x 8
  */
-#define CLOCK_HIGH_TIME_OUT_100K_TICKS	204
-#define CLOCK_HIGH_TIME_OUT_400K_TICKS	204
-#define CLOCK_HIGH_TIME_OUT_1000K_TICKS	204
+#define CLOCK_HIGH_TIME_OUT_100K_TICKS	97
+#define CLOCK_HIGH_TIME_OUT_400K_TICKS	97
+#define CLOCK_HIGH_TIME_OUT_1000K_TICKS	97
 
 #define TO_SCALING_100K		\
 	((BUS_IDLE_MIN_100K_TICKS << 24) | (CTRL_CUM_TIME_OUT_100K_TICKS << 16) | \

drivers/i2c/busses/i2c-ocores.c

@@ -342,18 +342,18 @@ static int ocores_poll_wait(struct ocores_i2c *i2c)
  * ocores_isr(), we just add our polling code around it.
  *
  * It can run in atomic context
+ *
+ * Return: 0 on success, -ETIMEDOUT on timeout
  */
-static void ocores_process_polling(struct ocores_i2c *i2c)
+static int ocores_process_polling(struct ocores_i2c *i2c)
 {
-	while (1) {
-		irqreturn_t ret;
-		int err;
+	irqreturn_t ret;
+	int err = 0;
 
+	while (1) {
 		err = ocores_poll_wait(i2c);
-		if (err) {
-			i2c->state = STATE_ERROR;
+		if (err)
 			break; /* timeout */
-		}
 
 		ret = ocores_isr(-1, i2c);
 		if (ret == IRQ_NONE)
@@ -364,13 +364,15 @@ static void ocores_process_polling(struct ocores_i2c *i2c)
 					break;
 		}
 	}
+
+	return err;
 }
 
 static int ocores_xfer_core(struct ocores_i2c *i2c,
 			    struct i2c_msg *msgs, int num,
 			    bool polling)
 {
-	int ret;
+	int ret = 0;
 	u8 ctrl;
 
 	ctrl = oc_getreg(i2c, OCI2C_CONTROL);
@@ -388,15 +390,16 @@ static int ocores_xfer_core(struct ocores_i2c *i2c,
 	oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_START);
 
 	if (polling) {
-		ocores_process_polling(i2c);
+		ret = ocores_process_polling(i2c);
 	} else {
-		ret = wait_event_timeout(i2c->wait,
-					 (i2c->state == STATE_ERROR) ||
-					 (i2c->state == STATE_DONE), HZ);
-		if (ret == 0) {
-			ocores_process_timeout(i2c);
-			return -ETIMEDOUT;
-		}
+		if (wait_event_timeout(i2c->wait,
+				       (i2c->state == STATE_ERROR) ||
+				       (i2c->state == STATE_DONE), HZ) == 0)
+			ret = -ETIMEDOUT;
+	}
+	if (ret) {
+		ocores_process_timeout(i2c);
+		return ret;
 	}
 
 	return (i2c->state == STATE_DONE) ? num : -EIO;