Merge branch 'refs/heads/bits/170-atcphy' into asahi-wip

Author: marcan

drivers/nvmem/core.c

@@ -481,8 +481,8 @@ static int nvmem_cell_info_to_nvmem_cell_entry_nodup(struct nvmem_device *nvmem,
 	cell->np = info->np;
 
 	if (cell->nbits)
-		cell->bytes = DIV_ROUND_UP(cell->nbits + cell->bit_offset,
-					   BITS_PER_BYTE);
+		cell->bytes = round_up(DIV_ROUND_UP(cell->nbits + cell->bit_offset,
+					   BITS_PER_BYTE), nvmem->word_size);
 
 	if (!IS_ALIGNED(cell->offset, nvmem->stride)) {
 		dev_err(&nvmem->dev,
@@ -1552,15 +1552,23 @@ EXPORT_SYMBOL_GPL(nvmem_cell_put);
 static void nvmem_shift_read_buffer_in_place(struct nvmem_cell_entry *cell, void *buf)
 {
 	u8 *p, *b;
-	int i, extra, bit_offset = cell->bit_offset;
+	int i, padding, extra, bit_offset = cell->bit_offset;
+	int bytes = cell->bytes;
 
 	p = b = buf;
 	if (bit_offset) {
+		padding = bit_offset/8;
+		if (padding) {
+		      memmove(buf, buf + padding, bytes - padding);
+		      bit_offset -= BITS_PER_BYTE * padding;
+		      bytes -= padding;
+		}
+
 		/* First shift */
 		*b++ >>= bit_offset;
 
 		/* setup rest of the bytes if any */
-		for (i = 1; i < cell->bytes; i++) {
+		for (i = 1; i < bytes; i++) {
 			/* Get bits from next byte and shift them towards msb */
 			*p |= *b << (BITS_PER_BYTE - bit_offset);
 
@@ -1573,7 +1581,7 @@ static void nvmem_shift_read_buffer_in_place(struct nvmem_cell_entry *cell, void
 	}
 
 	/* result fits in less bytes */
-	extra = cell->bytes - DIV_ROUND_UP(cell->nbits, BITS_PER_BYTE);
+	extra = bytes - DIV_ROUND_UP(cell->nbits, BITS_PER_BYTE);
 	while (--extra >= 0)
 		*p-- = 0;
 

drivers/phy/Kconfig

@@ -74,6 +74,7 @@ config PHY_CAN_TRANSCEIVER
 
 source "drivers/phy/allwinner/Kconfig"
 source "drivers/phy/amlogic/Kconfig"
+source "drivers/phy/apple/Kconfig"
 source "drivers/phy/broadcom/Kconfig"
 source "drivers/phy/cadence/Kconfig"
 source "drivers/phy/freescale/Kconfig"

drivers/phy/Makefile

@@ -12,6 +12,7 @@ obj-$(CONFIG_PHY_PISTACHIO_USB)		+= phy-pistachio-usb.o
 obj-$(CONFIG_USB_LGM_PHY)		+= phy-lgm-usb.o
 obj-y					+= allwinner/	\
 					   amlogic/	\
+					   apple/	\
 					   broadcom/	\
 					   cadence/	\
 					   freescale/	\

drivers/phy/apple/Kconfig

@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+config PHY_APPLE_ATC
+	tristate "Apple Type-C PHY"
+	depends on ARCH_APPLE || COMPILE_TEST
+	default ARCH_APPLE
+	select GENERIC_PHY
+	select TYPEC
+	help
+	  Enable this to add support for the Apple Type-C PHY, switch
+	  and mux found in Apple SoCs such as the M1.
+	  This driver currently provides support for USB2 and USB3.

drivers/phy/apple/Makefile

@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+CFLAGS_trace.o			:= -I$(src)
+
+obj-$(CONFIG_PHY_APPLE_ATC)		+= phy-apple-atc.o
+phy-apple-atc-y			:= atc.o
+phy-apple-atc-$(CONFIG_TRACING)	+= trace.o