Bluetooth: Add Broadcom channel priority commands

Certain Broadcom bluetooth chips (bcm4377/bcm4378/bcm438) need ACL
streams carrying audio to be set as "high priority" using a vendor
specific command to prevent 10-ish second-long dropouts whenever
something does a device scan. This patch sends the command when the
socket priority is set to TC_PRIO_INTERACTIVE, as BlueZ does for audio.

Signed-off-by: Sasha Finkelstein <[email protected]>

Author: WhatAmISupposedToPutHere

MAINTAINERS

@@ -2529,6 +2529,8 @@ F:	include/dt-bindings/pinctrl/apple.h
 F:	include/linux/mfd/macsmc.h
 F:	include/linux/soc/apple/*
 F:	include/uapi/drm/asahi_drm.h
+F:	net/bluetooth/brcm.c
+F:	net/bluetooth/brcm.h
 
 ARM/ARTPEC MACHINE SUPPORT
 M:	Jesper Nilsson <[email protected]>

drivers/bluetooth/hci_bcm4377.c

@@ -2397,6 +2397,8 @@ static int bcm4377_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	if (bcm4377->hw->broken_le_ext_adv_report_phy)
 		hci_set_quirk(hdev, HCI_QUIRK_FIXUP_LE_EXT_ADV_REPORT_PHY);
 
+	hci_set_brcm_capable(hdev);
+
 	pci_set_drvdata(pdev, bcm4377);
 	hci_set_drvdata(hdev, bcm4377);
 	SET_HCIDEV_DEV(hdev, &pdev->dev);

include/net/bluetooth/bluetooth.h

@@ -457,6 +457,7 @@ struct l2cap_ctrl {
 };
 
 struct hci_dev;
+struct hci_conn;
 
 typedef void (*hci_req_complete_t)(struct hci_dev *hdev, u8 status, u16 opcode);
 typedef void (*hci_req_complete_skb_t)(struct hci_dev *hdev, u8 status,
@@ -469,6 +470,9 @@ void hci_req_cmd_complete(struct hci_dev *hdev, u16 opcode, u8 status,
 int hci_ethtool_ts_info(unsigned int index, int sk_proto,
 			struct kernel_ethtool_ts_info *ts_info);
 
+int hci_conn_setsockopt(struct hci_conn *conn, struct sock *sk, int level,
+			int optname, sockptr_t optval, unsigned int optlen);
+
 #define HCI_REQ_START	BIT(0)
 #define HCI_REQ_SKB	BIT(1)
 

include/net/bluetooth/hci_core.h

@@ -642,6 +642,10 @@ struct hci_dev {
 	bool			aosp_quality_report;
 #endif
 
+#if IS_ENABLED(CONFIG_BT_BRCMEXT)
+	bool			brcm_capable;
+#endif
+
 	int (*open)(struct hci_dev *hdev);
 	int (*close)(struct hci_dev *hdev);
 	int (*flush)(struct hci_dev *hdev);
@@ -1791,6 +1795,13 @@ static inline void hci_set_aosp_capable(struct hci_dev *hdev)
 #endif
 }
 
+static inline void hci_set_brcm_capable(struct hci_dev *hdev)
+{
+#if IS_ENABLED(CONFIG_BT_BRCMEXT)
+	hdev->brcm_capable = true;
+#endif
+}
+
 static inline void hci_devcd_setup(struct hci_dev *hdev)
 {
 #ifdef CONFIG_DEV_COREDUMP

net/bluetooth/Kconfig

@@ -110,6 +110,13 @@ config BT_AOSPEXT
 	  This options enables support for the Android Open Source
 	  Project defined HCI vendor extensions.
 
+config BT_BRCMEXT
+	bool "Enable Broadcom extensions"
+	depends on BT
+	help
+	  This option enables support for the Broadcom defined HCI
+	  vendor extensions.
+
 config BT_DEBUGFS
 	bool "Export Bluetooth internals in debugfs"
 	depends on BT && DEBUG_FS

net/bluetooth/Makefile

@@ -24,5 +24,6 @@ bluetooth-$(CONFIG_BT_LE) += iso.o
 bluetooth-$(CONFIG_BT_LEDS) += leds.o
 bluetooth-$(CONFIG_BT_MSFTEXT) += msft.o
 bluetooth-$(CONFIG_BT_AOSPEXT) += aosp.o
+bluetooth-$(CONFIG_BT_BRCMEXT) += brcm.o
 bluetooth-$(CONFIG_BT_DEBUGFS) += hci_debugfs.o
 bluetooth-$(CONFIG_BT_SELFTEST) += selftest.o

net/bluetooth/brcm.c

@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2026 The Asahi Linux Contributors
+ */
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "brcm.h"
+
+int brcm_set_high_priority(struct hci_dev *hdev, u16 handle, bool enable)
+{
+	struct sk_buff *skb;
+	u8 cmd[3];
+
+	if (!hdev->brcm_capable)
+		return 0;
+
+	cmd[0] = handle;
+	cmd[1] = handle >> 8;
+	cmd[2] = !!enable;
+
+	skb = hci_cmd_sync(hdev, 0xfc57, sizeof(cmd), cmd, HCI_CMD_TIMEOUT);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	kfree_skb(skb);
+	return 0;
+}

net/bluetooth/brcm.h

@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2026 The Asahi Linux Contributors
+ */
+
+#if IS_ENABLED(CONFIG_BT_BRCMEXT)
+
+int brcm_set_high_priority(struct hci_dev *hdev, u16 handle, bool enable);
+
+#else
+
+static inline int brcm_set_high_priority(struct hci_dev *hdev, u16 handle, bool enable)
+{
+	return 0;
+}
+
+#endif

net/bluetooth/hci_conn.c

@@ -35,6 +35,7 @@
 #include <net/bluetooth/iso.h>
 #include <net/bluetooth/mgmt.h>
 
+#include "brcm.h"
 #include "smp.h"
 #include "eir.h"
 
@@ -3069,6 +3070,32 @@ int hci_conn_set_phy(struct hci_conn *conn, u32 phys)
 	}
 }
 
+int hci_conn_setsockopt(struct hci_conn *conn, struct sock *sk, int level,
+			int optname, sockptr_t optval, unsigned int optlen) {
+	int val;
+	bool old_high, new_high, changed;
+
+	if (level != SOL_SOCKET)
+		return 0;
+
+	if (optname != SO_PRIORITY)
+		return 0;
+
+	if (optlen < sizeof(int))
+		return -EINVAL;
+
+	if (copy_from_sockptr(&val, optval, sizeof(val)))
+		return -EFAULT;
+
+	old_high = sk->sk_priority >= TC_PRIO_INTERACTIVE;
+	new_high = val >= TC_PRIO_INTERACTIVE;
+	changed = old_high != new_high;
+	if (!changed)
+		return 0;
+
+	return brcm_set_high_priority(conn->hdev, conn->handle, new_high);
+}
+
 static int abort_conn_sync(struct hci_dev *hdev, void *data)
 {
 	struct hci_conn *conn = data;

net/bluetooth/l2cap_sock.c

@@ -891,6 +891,16 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname,
 
 	BT_DBG("sk %p", sk);
 
+	if (level == SOL_SOCKET) {
+		conn = chan->conn;
+		if (conn)
+			err = hci_conn_setsockopt(conn->hcon, sock->sk, level,
+						  optname, optval, optlen);
+		if (err)
+			return err;
+		return sock_setsockopt(sock, level, optname, optval, optlen);
+	}
+
 	if (level == SOL_L2CAP)
 		return l2cap_sock_setsockopt_old(sock, optname, optval, optlen);
 
@@ -1932,6 +1942,9 @@ static struct sock *l2cap_sock_alloc(struct net *net, struct socket *sock,
 
 	INIT_LIST_HEAD(&l2cap_pi(sk)->rx_busy);
 
+	if (sock)
+		set_bit(SOCK_CUSTOM_SOCKOPT, &sock->flags);
+
 	chan = l2cap_chan_create();
 	if (!chan) {
 		sk_free(sk);