arm64: dts: rockchip: Fix rk356x PCIe register and range mappings

The register and range mappings for the PCIe controller in Rockchip's
RK356x SoCs are incorrect. Replace them with corrected values from the
vendor BSP sources, updated to match current DT schema.

These values are also used in u-boot.

Fixes: 66b51ea ("arm64: dts: rockchip: Add rk3568 PCIe2x1 controller")
Cc: [email protected]
Signed-off-by: Andrew Powers-Holmes <[email protected]>
Signed-off-by: Jonas Karlman <[email protected]>
Signed-off-by: Nicolas Frattaroli <[email protected]>
Tested-by: Diederik de Haas <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Stuebner <[email protected]>

Author: neggles

arch/arm64/boot/dts/rockchip/rk3568.dtsi

@@ -94,9 +94,10 @@
 		power-domains = <&power RK3568_PD_PIPE>;
 		reg = <0x3 0xc0400000 0x0 0x00400000>,
 		      <0x0 0xfe270000 0x0 0x00010000>,
-		      <0x3 0x7f000000 0x0 0x01000000>;
-		ranges = <0x01000000 0x0 0x3ef00000 0x3 0x7ef00000 0x0 0x00100000>,
-			 <0x02000000 0x0 0x00000000 0x3 0x40000000 0x0 0x3ef00000>;
+		      <0x0 0xf2000000 0x0 0x00100000>;
+		ranges = <0x01000000 0x0 0xf2100000 0x0 0xf2100000 0x0 0x00100000>,
+			 <0x02000000 0x0 0xf2200000 0x0 0xf2200000 0x0 0x01e00000>,
+			 <0x03000000 0x0 0x40000000 0x3 0x40000000 0x0 0x40000000>;
 		reg-names = "dbi", "apb", "config";
 		resets = <&cru SRST_PCIE30X1_POWERUP>;
 		reset-names = "pipe";
@@ -146,9 +147,10 @@
 		power-domains = <&power RK3568_PD_PIPE>;
 		reg = <0x3 0xc0800000 0x0 0x00400000>,
 		      <0x0 0xfe280000 0x0 0x00010000>,
-		      <0x3 0xbf000000 0x0 0x01000000>;
-		ranges = <0x01000000 0x0 0x3ef00000 0x3 0xbef00000 0x0 0x00100000>,
-			 <0x02000000 0x0 0x00000000 0x3 0x80000000 0x0 0x3ef00000>;
+		      <0x0 0xf0000000 0x0 0x00100000>;
+		ranges = <0x01000000 0x0 0xf0100000 0x0 0xf0100000 0x0 0x00100000>,
+			 <0x02000000 0x0 0xf0200000 0x0 0xf0200000 0x0 0x01e00000>,
+			 <0x03000000 0x0 0x40000000 0x3 0x80000000 0x0 0x40000000>;
 		reg-names = "dbi", "apb", "config";
 		resets = <&cru SRST_PCIE30X2_POWERUP>;
 		reset-names = "pipe";

arch/arm64/boot/dts/rockchip/rk356x.dtsi

@@ -952,7 +952,7 @@
 		compatible = "rockchip,rk3568-pcie";
 		reg = <0x3 0xc0000000 0x0 0x00400000>,
 		      <0x0 0xfe260000 0x0 0x00010000>,
-		      <0x3 0x3f000000 0x0 0x01000000>;
+		      <0x0 0xf4000000 0x0 0x00100000>;
 		reg-names = "dbi", "apb", "config";
 		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
@@ -982,8 +982,9 @@
 		phys = <&combphy2 PHY_TYPE_PCIE>;
 		phy-names = "pcie-phy";
 		power-domains = <&power RK3568_PD_PIPE>;
-		ranges = <0x01000000 0x0 0x3ef00000 0x3 0x3ef00000 0x0 0x00100000
-			  0x02000000 0x0 0x00000000 0x3 0x00000000 0x0 0x3ef00000>;
+		ranges = <0x01000000 0x0 0xf4100000 0x0 0xf4100000 0x0 0x00100000>,
+			 <0x02000000 0x0 0xf4200000 0x0 0xf4200000 0x0 0x01e00000>,
+			 <0x03000000 0x0 0x40000000 0x3 0x00000000 0x0 0x40000000>;
 		resets = <&cru SRST_PCIE20_POWERUP>;
 		reset-names = "pipe";
 		#address-cells = <3>;