net: hns3: default enable tx bounce buffer when smmu enabled

The SMMU engine on HIP09 chip has a hardware issue.
SMMU pagetable prefetch features may prefetch and use a invalid PTE
even the PTE is valid at that time. This will cause the device trigger
fake pagefaults. The solution is to avoid prefetching by adding a
SYNC command when smmu mapping a iova. But the performance of nic has a
sharp drop. Then we do this workaround, always enable tx bounce buffer,
avoid mapping/unmapping on TX path.

This issue only affects HNS3, so we always enable
tx bounce buffer when smmu enabled to improve performance.

Fixes: 295ba23 ("net: hns3: add device version to replace pci revision")
Signed-off-by: Jian Shen <[email protected]>
Signed-off-by: Jijie Shao <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>

Author: Jijie Shao

drivers/net/ethernet/hisilicon/hns3/hns3_enet.c

@@ -11,6 +11,7 @@
 #include <linux/irq.h>
 #include <linux/ip.h>
 #include <linux/ipv6.h>
+#include <linux/iommu.h>
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/skbuff.h>
@@ -1039,6 +1040,8 @@ static bool hns3_can_use_tx_sgl(struct hns3_enet_ring *ring,
 static void hns3_init_tx_spare_buffer(struct hns3_enet_ring *ring)
 {
 	u32 alloc_size = ring->tqp->handle->kinfo.tx_spare_buf_size;
+	struct net_device *netdev = ring_to_netdev(ring);
+	struct hns3_nic_priv *priv = netdev_priv(netdev);
 	struct hns3_tx_spare *tx_spare;
 	struct page *page;
 	dma_addr_t dma;
@@ -1080,6 +1083,7 @@ static void hns3_init_tx_spare_buffer(struct hns3_enet_ring *ring)
 	tx_spare->buf = page_address(page);
 	tx_spare->len = PAGE_SIZE << order;
 	ring->tx_spare = tx_spare;
+	ring->tx_copybreak = priv->tx_copybreak;
 	return;
 
 dma_mapping_error:
@@ -4874,6 +4878,30 @@ static void hns3_nic_dealloc_vector_data(struct hns3_nic_priv *priv)
 	devm_kfree(&pdev->dev, priv->tqp_vector);
 }
 
+static void hns3_update_tx_spare_buf_config(struct hns3_nic_priv *priv)
+{
+#define HNS3_MIN_SPARE_BUF_SIZE (2 * 1024 * 1024)
+#define HNS3_MAX_PACKET_SIZE (64 * 1024)
+
+	struct iommu_domain *domain = iommu_get_domain_for_dev(priv->dev);
+	struct hnae3_ae_dev *ae_dev = hns3_get_ae_dev(priv->ae_handle);
+	struct hnae3_handle *handle = priv->ae_handle;
+
+	if (ae_dev->dev_version < HNAE3_DEVICE_VERSION_V3)
+		return;
+
+	if (!(domain && iommu_is_dma_domain(domain)))
+		return;
+
+	priv->min_tx_copybreak = HNS3_MAX_PACKET_SIZE;
+	priv->min_tx_spare_buf_size = HNS3_MIN_SPARE_BUF_SIZE;
+
+	if (priv->tx_copybreak < priv->min_tx_copybreak)
+		priv->tx_copybreak = priv->min_tx_copybreak;
+	if (handle->kinfo.tx_spare_buf_size < priv->min_tx_spare_buf_size)
+		handle->kinfo.tx_spare_buf_size = priv->min_tx_spare_buf_size;
+}
+
 static void hns3_ring_get_cfg(struct hnae3_queue *q, struct hns3_nic_priv *priv,
 			      unsigned int ring_type)
 {
@@ -5107,6 +5135,7 @@ int hns3_init_all_ring(struct hns3_nic_priv *priv)
 	int i, j;
 	int ret;
 
+	hns3_update_tx_spare_buf_config(priv);
 	for (i = 0; i < ring_num; i++) {
 		ret = hns3_alloc_ring_memory(&priv->ring[i]);
 		if (ret) {
@@ -5311,6 +5340,8 @@ static int hns3_client_init(struct hnae3_handle *handle)
 	priv->ae_handle = handle;
 	priv->tx_timeout_count = 0;
 	priv->max_non_tso_bd_num = ae_dev->dev_specs.max_non_tso_bd_num;
+	priv->min_tx_copybreak = 0;
+	priv->min_tx_spare_buf_size = 0;
 	set_bit(HNS3_NIC_STATE_DOWN, &priv->state);
 
 	handle->msg_enable = netif_msg_init(debug, DEFAULT_MSG_LEVEL);

drivers/net/ethernet/hisilicon/hns3/hns3_enet.h

@@ -596,6 +596,8 @@ struct hns3_nic_priv {
 	struct hns3_enet_coalesce rx_coal;
 	u32 tx_copybreak;
 	u32 rx_copybreak;
+	u32 min_tx_copybreak;
+	u32 min_tx_spare_buf_size;
 };
 
 union l3_hdr_info {